Microprocessor avr työt

Suodata

Viimeisimmät hakuni
Suodatusperuste:
Budjetti
asti
asti
asti
Tyyppi
Taidot
Kielet
    Työn tila
    1,489 microprocessor avr työtä löytyi, hinnoittelu EUR

    ...have a Hardware ready with GSM, Lora, and ESP32. I need Software Developer to do coding for the same. I need a candidate to be Experienced in Arduino IDE, and Bootloader to AVR controllers. Should have the Previous experience in the following thing, LORA | GSM | ESP-32 | RTC | EEPROM | MQTT in AWS. Candidate from Gurgaon or from Delhi is preferred

    €420 (Avg Bid)
    €420 Keskimäär. tarjous
    20 tarjoukset

    ...get a hardware developed for the final project of the product development class. Project Requirements: 1. A small hardware within the board size of 4cm x 4cm 2. ATMEL microprocessor with additional memory (Not the must, but best to have something with price constraint and open source resources) 3. I2C and SPI ports for connecting sensors. 4. Inbuilt

    €425 (Avg Bid)
    €425 Keskimäär. tarjous
    13 tarjoukset
    Essay Writing Loppunut left

    Hardware acceleration for computer intelligence • Class of microprocessor/computer system designed to accelerate artificial neural networks, machine vision and other machine learning algorithms for robotics, internet of things and other data-intensive or sensor-driven tasks. • SW, GPU, FPGA, ASICs, Heterogeneous computing • Examples: • Virtual

    €48 (Avg Bid)
    €48 Keskimäär. tarjous
    50 tarjoukset

    I want to make a Assembly code for DWT image processing (preferably haar dwt). The assembly code is for DLX microprocessor. I will test the code in DLX emulator in Windows 32bit.

    €44 (Avg Bid)
    €44 Keskimäär. tarjous
    1 tarjoukset

    The task is to design a small PCB that controls the logic to interfac...the PSU modules have been selected. Likewise the micro which would come from the PIC or AVR families. Deliverables for the project will be: • schematics • pcb artwork • BOM • source code for the firmware, along with the build instructions using the PIC/AVR design tools

    €397 (Avg Bid)
    €397 Keskimäär. tarjous
    20 tarjoukset

    assembly language with microprocessor TM4C123GXL. we need only source file and circuit schematic.

    €32 (Avg Bid)
    €32 Keskimäär. tarjous
    4 tarjoukset

    I need help to install AVR programmer driver on my windows 10 i have this unit. [kirjaudu nähdäksesi URL:n] Problem: i try to install a but is get driver problem unknow driver for windows. i wont get help over teamveiwer

    €42 / hr (Avg Bid)
    €42 / hr Keskimäär. tarjous
    4 tarjoukset

    ...BOM! Use inexpensive microprocessor from Rockchip, Allwinner [kirjaudu nähdäksesi URL:n] should be Android. Decode 4K a/v stream, record from microphone input. Download and run Android apps. No AI, neural network or image recognition required. Be able to drive dual touch screens (1080P each). Use existing SBC reference design from microprocessor company. In reality ju...

    €2353 (Avg Bid)
    €2353 Keskimäär. tarjous
    19 tarjoukset

    ...I would also like to see if it is possible to add a controllable relay to the power portion that would allow the ability to disconnect the power via Arduino or another microprocessor. The goal is to have banks of 15 setup and up to 105 PORTS setup where I can more control of the process and regulate power issues if there are any. Please apply if

    €19 / hr (Avg Bid)
    €19 / hr Keskimäär. tarjous
    18 tarjoukset

    Our initial intention was to implement a delay and stuck at fault detection system for a 32-bit AVR microcontroller. Starting from a configuration involving professional J-Link EDU equipment, we would check the White-box testing algorithm for the solar tracker by placing breakpoints and watch points inside the code to monitor changes in the registries

    €328 (Avg Bid)
    €328 Keskimäär. tarjous
    8 tarjoukset

    I'm ...able to write small bootloader in assembler language, moreover this loader should be less then 512 bytes. Loader must be designed for satteliter receiver based on STI7100 microprocessor (SH4 architecture) This program have to initialize RAM memory and load from uart intereface u-boot file (I have prepared uboot for this board) and execute it.

    €132 (Avg Bid)
    €132 Keskimäär. tarjous
    1 tarjoukset

    for ADE7758 i need write one paper or half contains explanation about operational inside IC chip, i will attach fu...one paper or half contains explanation about operational inside IC chip, i will attach function block diagram there are 3 or 4 operation of calculation inside IC for example AVR, VR i need clearly explanation for each on how happened

    €32 (Avg Bid)
    €32 Keskimäär. tarjous
    5 tarjoukset
    watchdog_mega2560 Loppunut left

    I need deploy an watchdog be able retrival of the Reset Cause register (MCUSR) of the AVR. Normally, MCUSR itself is destroyed by the use of a bootloader. Currently I already deployed several watchdog sample, but after reset, my PCB don't inittialize and is required do burn bootloader again. I am using mega2560.

    €164 (Avg Bid)
    €164 Keskimäär. tarjous
    5 tarjoukset

    Its a small assignment. If you are an expert and have worked on it before. text me

    €113 (Avg Bid)
    €113 Keskimäär. tarjous
    9 tarjoukset

    -The application must be written in AVR assembler -Your project must include some form of user interface (using sensors and actuators from the Arduino starter kit)

    €127 (Avg Bid)
    €127 Keskimäär. tarjous
    25 tarjoukset

    Hello , I ...state showing the Celsius state , when the button is pressed it will cycle between Kelvin and Fahrenheit ,coming back to the default Celsius state. The code must be written in AVR Assembler and uploaded trough Atmel Studio 7. I have an assembler file but it needs to be modified. I don't need the code converted from C or from ArduinoIDE !

    €36 (Avg Bid)
    €36 Keskimäär. tarjous
    7 tarjoukset

    Circuit design for remote control handset and receiver to operate the controls of an audio amplifier, input selection, volume, balance and tone controls. Microprocessor programming is required for this work. Circuits will be provided at a later stage of the negotiation

    €189 (Avg Bid)
    €189 Keskimäär. tarjous
    20 tarjoukset

    A. WHAT WE HAVE: Present State of the Project: Our project proposes a hardware testing method oriented towards an AVR – 8 bit Microcontroller (Arduino Unit) that is involved in the automation process of a photovoltaic panel. The mixture between a traditional Bed-of-Nails tester, a Self-Testing code for GPIO (General Purpose Input Output) pins testing

    €398 (Avg Bid)
    €398 Keskimäär. tarjous
    9 tarjoukset

    I want to have and LCD1602 mounted on my Arduino atMega2560 board that can show the temperature (I have th...and also a button that when it's pressed to change the temperature into kelvin and when it''s pressed again to change the temperature back to Celsius. It needs to be coded in AVR Assembler and able to run on board atMega2560 via Atmel Studio.

    €23 (Avg Bid)
    €23 Keskimäär. tarjous
    19 tarjoukset

    Need a logo, letterhead and business card designed for my new company. Name of the company is AVR Electrical.

    €66 (Avg Bid)
    €66 Keskimäär. tarjous
    67 tarjoukset

    using a mechanical servo with a light-sensitive resistor to mechanically respond to a light source. The system is primary defined by two behaviors: GAUGE and SPIN, and two modes: MATCH and REVERSE intensity I'll send you more details

    €20 (Avg Bid)
    €20 Keskimäär. tarjous
    3 tarjoukset
    C language coding Loppunut left

    This is a C code that should work on AVR butterfly.

    €135 (Avg Bid)
    €135 Keskimäär. tarjous
    5 tarjoukset

    ...another device for both charging and discharging other than the drone or chargers designed by DJI). My device will use either the Raspberry Pi 3 b+ or the Arduino ESP32 microprocessor so communication must match / be capable by these two devices. Quote must include all time and materials entirely. (If you need to buy batteries, figure that into your

    €1560 (Avg Bid)
    €1560 Keskimäär. tarjous
    15 tarjoukset

    Design a BLDC motor controller 500W using any atmega series and code using avr studios.

    €135 (Avg Bid)
    €135 Keskimäär. tarjous
    9 tarjoukset

    ...this project reed this carefully: - The AVR system should output an AC voltage of 240 V at 50 Hz automatically for an AC input voltage in the range of 180 V to 260 V. Otherwise, the AVR system should shut off. - The output voltage regulation range should be +2% to -2% of the nominal output voltage. - The AVR system should also be able to perform the

    €274 (Avg Bid)
    €274 Keskimäär. tarjous
    14 tarjoukset

    ...input voltage in the range of 180 V to 260 V 50 Hz and output an AC voltage of 240 V at 50 Hz. Otherwise, the AVR system should shut off. - The output voltage regulation range should be +2% to -2% of the nominal output voltage. - The AVR system should also be able to perform the following tasks: surge suppression, short circuit protection and harmonic

    €205 (Avg Bid)
    €205 Keskimäär. tarjous
    3 tarjoukset

    For our Business, we want to hire a person to write microprocessor code (specially for atmega chips) and who have knowledge about basic electronic circuits.

    €84 (Avg Bid)
    €84 Keskimäär. tarjous
    7 tarjoukset

    I currently have firmware that reads a DS1820 temp sensor and transmits the data through RS485 when requested. Currently, the firmware pauses for 750 mS while the temp conversion occurs then responds with the current value. I'd like to modify the firmware so that it always replies with the last completed conversion and constantly be converting the next reading in between requests. The idea be...

    €26 (Avg Bid)
    €26 Keskimäär. tarjous
    2 tarjoukset

    The components has been designed to work with 68000 microprocessor or 80C188, it's needed to design a PCB and base programming to connect with a raspberry board (maybe SPI or I2C communication). There are 2 components that should work together (documentation of components will be provided).

    €1264 (Avg Bid)
    €1264 Keskimäär. tarjous
    27 tarjoukset

    We are looking for something to help us with an ECU programming Project. Need experience with the following: C++ Can Bus Communication Microprocessor Read and Write Debugging Software Development Please contact us if you have experience in the field of work.

    €18 / hr (Avg Bid)
    €18 / hr Keskimäär. tarjous
    12 tarjoukset

    ...4. Separate cost for Working Prototype 5. Gerber files for production of PCB 6. Complete BOM, all commercial parts 7. Firm ware 8. Should not use the same main chip or microprocessor as FIXD 9. Software for communicating all vehicle parameters to a Cell Phone as a table to be sent to our server. Nothing else in that software. Information should be

    €3325 (Avg Bid)
    €3325 Keskimäär. tarjous
    21 tarjoukset

    ...must be non-invasive ie not require rewiring or splitting the positive from ground wires and passing through an electromagnet coil etc. This is for use with an Arduino microprocessor, so either a digital I/O of on/off or some sort of current draw analogue reading is needed so the software can determine the definition of "on" and "off". I purchased

    €58 (Avg Bid)
    €58 Keskimäär. tarjous
    12 tarjoukset

    ...(see powerpoint file), and 5 ultrasonic sensors (see powerpoint file). I also need to buy the cords/cables that come with them... (They will all be wired to a central microprocessor to analyze their outputs) Give me cost each, cost total, website or address, and so on. Give me as much information about ordering them as you can... --------- Part

    €123 (Avg Bid)
    €123 Keskimäär. tarjous
    5 tarjoukset

    ...makeup a program for a agricultural implement guidance controller. I have not compile the C code for over 8 years and am out of touch with to process. I originally used the AVR-GCC compiler version 3.4.5. The design used the MCU ATMega161 which is now obsolete. The source code needs to be compiled for the ATMega16A. I could spend untold time trying

    €408 (Avg Bid)
    €408 Keskimäär. tarjous
    11 tarjoukset

    I need to implement an existing project (AVR194 application note) to work with my setup. There are things that I do not need and things I want to be added. Like, for example, PC6 pulled to high, then after 100ms, PB3 pulled to high, get current value on PD1 and pull PC6 low if overcurrent occures, not via a shunt like in app note.

    €121 (Avg Bid)
    €121 Keskimäär. tarjous
    7 tarjoukset

    Completion of R&D of Audio playback device. The project is 95% complete but needs additional coding for late addition components. The circuit boards are made. The original code files are available to the new designer to get familiar with the code prior to altering for the added end user functions.

    €11 / hr (Avg Bid)
    €11 / hr Keskimäär. tarjous
    3 tarjoukset

    Generate a few types of waveform with sampling rate of at least 50kHz Waveforms need to display from a range of frequency from ...types of waveform with sampling rate of at least 50kHz Waveforms need to display from a range of frequency from 1Hz to 10kHz and a controllable voltage offset Strictly using AVR C, ATMEGA32 and Digital Analogue Converter

    €14 (Avg Bid)
    €14 Keskimäär. tarjous
    8 tarjoukset

    ...Experience in software design and development using in OOD, TDD, ATDD • Good at C / C ++ Python programming languages for embedded systems software • Good background with Microprocessor and Microcontrollers (ARM, PIC, 8051, etc.) and development tools (GNU GCC, IAR, ICE, etc.). • Experience with Embedded OS (Linux, FreeRTOS) is an advantage • Understand

    €11 / hr (Avg Bid)
    €11 / hr Keskimäär. tarjous
    23 tarjoukset

    I'll give details to interested candidates I use Amtel7 to check the code. Regards

    €25 (Avg Bid)
    €25 Keskimäär. tarjous
    11 tarjoukset

    ...(see powerpoint file), and 5 ultrasonic sensors (see powerpoint file). I also need to buy the cords/cables that come with them... (They will all be wired to a central microprocessor to analyze their outputs) Give me cost each, cost total, website or address, and so on. Give me as much information about ordering them as you can... --------- Part

    €174 (Avg Bid)
    €174 Keskimäär. tarjous
    2 tarjoukset

    I need the code to realize an hygrometer/thermometer based on Atmel microcontroller (Attiny 85/ 84 or other avr microcontroller). I wish to read the values from the SHT 31-D sensor and proportionally rotate two stepper motors driven by DRV 8825. Each motor rotates a pointer on a dial to indicate humidity and temperature.

    €202 (Avg Bid)
    €202 Keskimäär. tarjous
    21 tarjoukset

    Add digital Flow sensor to existing code for Mini Arduino Pro (ATmega328P): 1) The flow sensor provides a pulse signal from a hall-effect sensor. 2) The sensor will read the water flow through the heater and the results will be an additional condition for turning the heater element on or off, similar to the pressure sensor. 3) The MCU will count the pulses per second (Hz) (or perhaps we break it...

    €15 / hr (Avg Bid)
    €15 / hr Keskimäär. tarjous
    6 tarjoukset

    Referring to computer architecture, write on the Structure of the Pentium

    €39 (Avg Bid)
    €39 Keskimäär. tarjous
    10 tarjoukset
    Avr studio C prog Loppunut left

    Need C code in avr studio with mega 32 for VL53L1X , code need to measure distance to 4m, library with function init, start measure, stop measure, read measure, change ranges

    €209 (Avg Bid)
    €209 Keskimäär. tarjous
    4 tarjoukset

    PCB, schematics, design files, Atmega (328 if possible) and ac...source of 5v or 3.3v. If possible, the final device should not require to be positioned in a predefined way (alignment). "The detection output shoud be available using the microprocessor serial port (TTL TX). If any configuration is needed we can use the same Serial (TTL RX) to config.

    €991 (Avg Bid)
    €991 Keskimäär. tarjous
    55 tarjoukset

    This project involves close understanding of 4 electronics parts - CMOS camera OV7670, STM32 microprocessor, Battery charging module, Bluetooth AT-09. We only have circuit diagrams for individual components but we need Gerber file to place online order for final board. You will have to do: 1. Review components we require on the board and draw a circuit

    €195 (Avg Bid)
    €195 Keskimäär. tarjous
    24 tarjoukset

    An up- and down- counting stopwatch with an LED matrix display has just a few other small features. The software for it has to be written in a month. Please find the details in the attached pdf document. Please read the pdf document carefully and ask, if anything is unclear. Thank you!

    €178 (Avg Bid)
    €178 Keskimäär. tarjous
    20 tarjoukset
    IOT Training Loppunut left

    ...Engineer will be responsible for embedded software code development and electrical test measurements. 3. Write embedded software code for a variety of targeted devices, 8051,PIC, AVR, ARM Cortex, Zigbee, Arduino and others to interface with lab test equipment and various devices under test. 4. Collect measurement data at the lab using MatLab, LabVIEW, and

    €297 (Avg Bid)
    €297 Keskimäär. tarjous
    14 tarjoukset

    Want a chip that will receive regular signal from a small microphone, learn the time spacing of the signal, activate a small servo motor if the signal not received at the expected time. For example, to activate a valve that occasionaly fails to open under fluid pressure

    €308 (Avg Bid)
    €308 Keskimäär. tarjous
    19 tarjoukset