Mechanical design työt

Suodata

Viimeisimmät hakuni
Suodatusperuste:
Budjetti
asti
asti
asti
Tyyppi
Taidot
Kielet
    Työn tila
    20,585 mechanical design työtä löytyi, hinnoittelu EUR

    I need a circuit diagram that fulfils the following conditions: 1) It must be controllable via a program (it doesn't matter if there are already open source programs for this or if I have to create one myself - it just must not work via a mechanical operation). 2) All products in the circuit diagram must be purchasable in Germany. 3) All exact products must be declared (e.g. controller Designation). These are the exact specifications: The circuit diagram is to be drawn within the white box (see attachment). 1: Can be connected to 10 or 19. Vmax: +/- 40V Current: +/- 120mA One wire. 2: Can be connected to 9 or 18. Vmax: +/- 40V Current: +/- 120mA One wire. 3: Can be connected to 10 or 19. Vmax: +/- 40V Current: +/- 120mA One wire. 4: Can be connected to 11 or 12,13,14,15. ...

    €160 (Avg Bid)
    €160 Keskimäär. tarjous
    4 tarjoukset

    i am looking for expert in mechanical to do solid rocket motor design development and fabrication Thrust: 2300 N

    €25 (Avg Bid)
    €25 Keskimäär. tarjous
    6 tarjoukset
    Looking for a Mechanical enginner 6 päivää left
    VARMENNETTU

    Hello, I am looking for a Mechanical engineer to assist with Thermodynamics and Phase Behaviour

    €26 (Avg Bid)
    €26 Keskimäär. tarjous
    11 tarjoukset
    Trophy icon Logo for QAZ International Company 5 päivää left

    QAZ International Company is a one stop center for Electro-Mechanical repairs for all industries. I want a modern design logo with the spirits of high technology, sustainability and engineering. QAZ must be large and International company must be smaller. People must remember QAZ. Company can be shortened to Co You can go on to see the actual one, looking way to old for me.

    €95 (Avg Bid)
    Mainostettu Taattu Sinetöity
    €95
    449 työtä
    Trophy icon Design a business logo for my company 2 päivää left

    I would like a business logo made with my company name "Titanium Mechanics". I would like to put it on my service truck as well as my business card later on. The service i will be providing is mechanical and electrical repair to heavy duty equipment including trucks, trailers, and off road equipment like escavators, dozers etc.

    €85 (Avg Bid)
    Taattu
    €85
    857 työtä
    The Alaska 5 päivää left

    The Alaska State Troopers received word on December 1, 2022, at around 2:00 am, that a male adult traveling by snowmachine from Noorvik to Kotzebue had activated an Apple iPhone Emergency SOS through satellite on his iPhone after getting lost. The Northwest Arctic Borough Search and Rescue Coordinator, along with regional search and rescue teams, the Apple Emergency Response ...Emergency Response Center, and four volunteer searchers, deployed to the Nimiuk Point region at the GPS coordinates the Apple Emergency Response Center had given them. The volunteer search team located the adult male and brought him to Kotzebue. Troopers received no reports of injuries. The problem that left the individual stranded is not mentioned in the report. failure of the snowmobile's mechanical...

    €17 / hr (Avg Bid)
    €17 / hr Keskimäär. tarjous
    24 tarjoukset
    The Alaska -- 2 5 päivää left

    The Alaska State Troopers received word on December 1, 2022, at around 2:00 am, that a male adult traveling by snowmachine from Noorvik to Kotzebue had activated an Apple iPhone Emergency SOS through satellite on his iPhone after getting lost. The Northwest Arctic Borough Search and Rescue Coordinator, along with regional search and rescue teams, the Apple Emergency Response ...Emergency Response Center, and four volunteer searchers, deployed to the Nimiuk Point region at the GPS coordinates the Apple Emergency Response Center had given them. The volunteer search team located the adult male and brought him to Kotzebue. Troopers received no reports of injuries. The problem that left the individual stranded is not mentioned in the report. failure of the snowmobile's mechanical...

    €3 / hr (Avg Bid)
    €3 / hr Keskimäär. tarjous
    4 tarjoukset

    Mechanical Inspector, auditer, experienced on pressure vessels and ASME Codes, reporting

    €416 (Avg Bid)
    €416 Keskimäär. tarjous
    9 tarjoukset
    I need a mechanical designer engineer 4 päivää left
    VARMENNETTU

    Develop a new vibration system for parts.

    €179 (Avg Bid)
    €179 Keskimäär. tarjous
    38 tarjoukset

    We are looking for a LoFi Hiphop (Mumble Rap) music producer who specializes in vocals and adjusting the background melody...with several different vocal takes to choose from. You can pick the one you think is the best or combine words from different takes. You can hear the song and view the stems at the link below. To be considered we are asking for you to prepare a short 10-30 second demo of your thoughts to make this sound like a commercial song that would be played on the radio. Budget: $100 USD and 10% of Mechanical Royalties paid by our client who is the Record Label. Timeframe: 30 days or by January 1, 2023 Please be sure to listen to the song and inspect the files before placing your bid. Link:

    €98 (Avg Bid)
    €98 Keskimäär. tarjous
    29 tarjoukset
    Solar PV Carport 6 päivää left

    The project is to design a solar PV carport using the resources provided. The initial design is to get the look right in CAD before rendering; I expect this to take only a few hours. The next part is to render the design, please note that is is made from sheet metal so should be extremely easy to render from CAD. The next phase is to check the mechanical strength of the design. The next phase is to make the designs modular using python for the various possible configurations of panels. This would include fitting different panel sizes. We would also like python to generate mechanical reports for all designs. Please get in touch for more information

    €14 (Avg Bid)
    €14 Keskimäär. tarjous
    1 tarjoukset

    I have a concept drawing done in revit 2018.2 model for 4 storey building. I am trying to get pricing for Electrical and HVAC in order to get an idea for financing purposes. Unfortunately the subcontractors do not entertain quoting the project without a full set of engineering drawings. Given the fact that it is only a concept model (which will most definitely change when architects and engineer get involved), I cannot spend too much. Please specify number and type of drawings.

    €270 (Avg Bid)
    €270 Keskimäär. tarjous
    39 tarjoukset
    research project 2 päivää left

    For the final project, you need to develop Revit models including: Architecture/Structure Mechanical Duct-work (only for the Basement) of the Wunsch Hall Building located at 309 Bridge Street based on the attached PDF, DWG files and your field observations and investigations. Please be informed that the attached files are partial and do not include all drawings. A summary of suggested steps to do the final project: Print the PDF single sided (11”x17”) Go over the project and familiarize yourself with the project. You may go and see the building and take some photos. Also, you can use online resources like Google, Bing or other search engines. The building Elevations are not included and you need to build the model based on your investigations. Be strategic and think ...

    €549 (Avg Bid)
    €549 Keskimäär. tarjous
    23 tarjoukset

    We need designer for design Autocoiling machine for Thimbles

    €254 (Avg Bid)
    €254 Keskimäär. tarjous
    17 tarjoukset
    research project -- 2 2 päivää left
    VARMENNETTU

    For the final project, you need to develop Revit models including: Architecture/Structure Mechanical Duct-work (only for the Basement) of the Wunsch Hall Building located at 309 Bridge Street based on the attached PDF, DWG files and your field observations and investigations. Please be informed that the attached files are partial and do not include all drawings. A summary of suggested steps to do the final project: Print the PDF single sided (11”x17”) Go over the project and familiarize yourself with the project. You may go and see the building and take some photos. Also, you can use online resources like Google, Bing or other search engines. The building Elevations are not included and you need to build the model based on your investigations. Be strategic and think ...

    €107 (Avg Bid)
    €107 Keskimäär. tarjous
    8 tarjoukset
    Mechanical Drawing 2 päivää left

    This is a very simple line drawing with no extensive specs. Essentially an outline. Drawing needs to be symmetrical and uniform. I will print out and use on my table saw to cut out two plywood templates for a prototype I am working on. Each drawing is less than 12 inches.

    €95 (Avg Bid)
    €95 Keskimäär. tarjous
    28 tarjoukset
    research project 2 päivää left
    VARMENNETTU

    For the final project, you need to develop Revit models including: Architecture/Structure Mechanical Duct-work (only for the Basement) of the Wunsch Hall Building located at 309 Bridge Street based on the attached PDF, DWG files and your field observations and investigations. Please be informed that the attached files are partial and do not include all drawings. A summary of suggested steps to do the final project: Print the PDF single sided (11”x17”) Go over the project and familiarize yourself with the project. You may go and see the building and take some photos. Also, you can use online resources like Google, Bing or other search engines. The building Elevations are not included and you need to build the model based on your investigations. Be strategic and think ...

    €129 (Avg Bid)
    €129 Keskimäär. tarjous
    15 tarjoukset

    Looking for someone to design a custom system for us. Must have experience in designer transformers or electrical components. Must be willing to sign an NDA. Must be willing to work with us on calls and texts during the lifetime of the project. Must understand mechanical simulations

    €125 (Avg Bid)
    €125 Keskimäär. tarjous
    33 tarjoukset
    assignment 6 1 päivä left

    Instructions Dear All, For the final project, you need to develop Revit models including: Architecture/Structure Mechanical Duct-work (only for the Basement) of the Wunsch Hall Building located at 309 Bridge Street based on the attached PDF, DWG files and your field observations and investigations. Please be informed that the attached files are partial and do not include all drawings. A summary of suggested steps to do the final project: Print the PDF single sided (11”x17”) Go over the project and familiarize yourself with the project. You may go and see the building and take some photos. Also, you can use online resources like Google, Bing or other search engines. The building Elevations are not included and you need to build the model based on your investigations. ...

    €126 (Avg Bid)
    €126 Keskimäär. tarjous
    18 tarjoukset

    We’re assembling a multidisciplinary product development team to develop a new Robotic Cooker. We anticipate that this project will need the following areas of technical expertise: Mechanical engineering, electrical engineering, and industrial design. Musts: • Fluent in English • Work around EST time zones • Experience with motors (servos, DC, etc.) and encoders for robotic arms • Experience with Shafts and Bearings You are invited to apply as a member of this team. As such, you only need to possess some of the above skills, as there will be multiple specialized team members. Thank you!

    €10 / hr (Avg Bid)
    €10 / hr Keskimäär. tarjous
    25 tarjoukset

    Hello everyone! Please review attached files. I need layouts , floor plan , living room and bathroom elevations (all walls) , electrical plan , ceiling plan , electrical plan , lighting plan , mechanical drawings and furniture drawings. Start your bid with gypsum board , so I will know you read this. I also need a quantity survey. Budget is 100 dolar. I will give 3d max files and legends to you. Maybe some layering will be needed. Further details will be shared on chat. Thank you for your time. Murat

    €130 (Avg Bid)
    €130 Keskimäär. tarjous
    26 tarjoukset

    ...Pipeline Integrity engineer, you are asked to design and develop Pipeline Integrity Man- agement System (PIMS) for a pipeline used in an engineering application. Your case study report should cover all the factors outlined below: • Select ONE pipeline system used in engineering applications (ex: Refinery, Chemical plant, Pharmaceutical Plant, Water, CO2 transportation etc) and explain the operational parameters such pressure, temperature, transporting medium, and the operational envi- ronment. (4 Marks) • Define and explain the core risk factors (minimum of five) associated with the pipeline applications. (4 Marks) • Explain the mechanical integrity factors associated with the selected pipeline. (5 Marks) • Select and explain the required Design ...

    €71 (Avg Bid)
    €71 Keskimäär. tarjous
    52 tarjoukset
    Waste Management---> Renewable Energy 14 tuntia left
    VARMENNETTU

    Hi, I am looking for someone who understand the chemical and mechanical processes that go into waste management conversion to energy.

    €26 (Avg Bid)
    €26 Keskimäär. tarjous
    40 tarjoukset

    I need the help of a mechanical engineer with experience in FEAS, ANSYS models just to help me write some small description of two pages urgently in the next few hours

    €6 - €19
    Kiireellinen Sinetöity
    €6 - €19
    1 tarjoukset

    The application will be used in organisations performing mechanical/electrical maintenance and requiring to purchase material to perform the said maintenance. Each material is the combination of a Description, Part Number (PN) and unit of measure (UOM).

    €4374 (Avg Bid)
    €4374 Keskimäär. tarjous
    33 tarjoukset

    My father was a mechanical engineer. He passed away about ten years ago. Before he became ill he was working on some calculations for a mechanics design project. I have several sheets of grid paper with his final scratchings in pencil. I would like to scan these and have someone take them to create a collage as a remembrance gift. Can someone help me with this project?

    €315 (Avg Bid)
    €315 Keskimäär. tarjous
    24 tarjoukset

    I have modelled two models using ANSYS mechanical APDL product launchers of SupportMaster2000 and support master 3000. I need someone to write a very detailed explanation and do compression between the two models using the values I obtained, covering several points. see pdf for more details

    €66 (Avg Bid)
    €66 Keskimäär. tarjous
    4 tarjoukset
    ANSYS MECHANICAL Loppunut left

    See the attached pdf for more details about the model construction and description.

    €147 (Avg Bid)
    €147 Keskimäär. tarjous
    32 tarjoukset

    Looking for an artist to create 3-5 different 'worlds' in C4D for a music video. We already have concept art, storyboards, and inspiration for the worlds and just need an artist who specialized in C4D to build the scenery. The worlds will be surreal and mechanical, with an emphasis on the interaction between nature and technology. Attached are some of our inspiration boards.

    €1985 (Avg Bid)
    €1985 Keskimäär. tarjous
    18 tarjoukset
    sell my pc Loppunut left

    i have one gaming pc with all all high specification with top notch condition GAMING SETUP FULLY MAX SPECIFICATION 64 GB RAM 3600 MHZ 2 TB NVME SSD 1-- 27Inch Lg 4K Monitor 2---34Inch Ultrawide Curved 144hz Monitor 3---AMD Rayzen 9 3950X CPU 4---AMD Redeon RX6800 XT 16GB GPU 5---Zebronics Zeb-Max Pro Mechanical Gaming Full Size Keyboard with RGB 6---Zebronics Zeb-Transformer-M Optical USB Gaming Mouse with LED Effect 7---HyperX Cloud Core – Gaming Headset for PC, DTS Headpone:X 8---Logitech C922 Pro Stream Webcam, HD 1080p/30fps or HD 720p/60fps 9---Blue Microphones Yeti USB Omnidirectional 10---Green Soul Monster Ultimate Series T Multi-Functional Ergonomic Chair with Premium Spandex ALL WITH COOLER MASTER CABINET WITH WATERCOLOR AND RGB LIGHT I need person wh...

    €82 (Avg Bid)
    €82 Keskimäär. tarjous
    1 tarjoukset

    ...servicing of various types of electronic, and electro-mechanical gadgets. We like to have a really eye-catching but very simple in style (not a very complex artwork) type of logo for our products. We already have a brand name registered. We need a logo to go with this particular name. The candidate that has been selected will be given the brand name to create the logo matching with the name and the theme of the products. A file is attached that explains the complete requirements and overrides any restriction of file types etc. chosen by Freelancer.com as a default. You will also have to sign the declaration and return to be considered for picking a winner amongst the group. We also added an example file to show what kind of very simplistic design we are looking for witho...

    €18 (Avg Bid)
    €18 Keskimäär. tarjous
    98 tarjoukset
    Logo designer Loppunut left

    Looking for someone to design a professional logo for my business Skillmech. Must have Skillmech as the main design and in smaller writing within the logo “mechanical labour solutions”.

    €184 (Avg Bid)
    €184 Keskimäär. tarjous
    74 tarjoukset

    We need to build a website for our startup in the fields of mechanical, electrical, and instrumentation-related trading, service, and maintenance activities. This website needs to list the products and services related to them, and the users can be easily understanding our company profile. If they want to connect or inquire regarding anything, they can communicate with us by the given contact details. Since this is a startup stage, we are looking for a cost-effective proposal for our requirements. Please note that we have already purchased the domain from Google.

    €156 (Avg Bid)
    €156 Keskimäär. tarjous
    67 tarjoukset

    Mechanical Engineer-Sandmill ,finished task

    €159 (Avg Bid)
    €159 Keskimäär. tarjous
    1 tarjoukset

    Sawmill- Mechanical Engineering for innovation

    €158 (Avg Bid)
    €158 Keskimäär. tarjous
    1 tarjoukset

    Project scope includes the demolition of an existing cabin (to floor/foundation)...and reconstruction of a timber frame cottage using the same footings except where the building is being made larger (new footings). The cottage is water access and off-grid. Power is provided by a solar/battery setup. Propane fuels the hot water heater and oven. A new septic tank and bed are being installed. We (Voyageur Backcountry Construction) are looking for assistance with the mechanical design and drafting for plumbing (incoming water & drainage), gas (location of propane regulator and lines), and electrical layout (only from existing AC panel throughout house). There may also be an opportunity to assist us with the non-structural framing & insulation components of the job...

    €22 / hr (Avg Bid)
    €22 / hr Keskimäär. tarjous
    18 tarjoukset

    We are RGK Group specializes in Nodular Cast Iron components, Forging alloys, Forging with heat treatment & machine components, and Precision fabrication and sheet metal assembly like hydraulic, agriculture components, Electrical devices, and as per customer requirements. Our Chairman and founder Mr. Ramnik G. Kotecha, A passionate technocrat person with business acumen and hard work, is now leading the RGK GROUP OF INDUSTRIES in Rajkot, Gujarat, INDIA. Since 1979 under his supervision, efforts, and motivation we have a qualified team of 250+ employees who are Business-driven, Technocrats, and Executives today with an annual group turnover of $55 million. (For more details ) We want to about this project all the manufacturing process setup/drawings, Models, and descriptions.

    €37 (Avg Bid)
    €37 Keskimäär. tarjous
    35 tarjoukset
    Data entry jobs Loppunut left

    Need a data set of Mechanical, Electrical, Electronics, and Civil engineers who are actively exploring opportunities

    €9 / hr (Avg Bid)
    €9 / hr Keskimäär. tarjous
    31 tarjoukset

    ...specialising in the design and manufacture of brackets. Their most popular design is the SupportMaster2000 (illustrated below), although a potential customer has enquired about the possibility of purchasing a slightly different bracket (called the SupportMaster3000). SupportMaster2000 JustHanging Ltd need to determine if the deflection and stress generated while in use are within acceptable ranges. You have been employed as a consultant engineer to perform a stress analysis study, in the form of finite element analysis, to create a parameterised model which can be altered to calculate the deflection and stress of the SupportMaster2000 and SupportMaster3000 under loading. JustHanging Ltd have provided the following information: • Engineering Drawing of the SupportM...

    €270 (Avg Bid)
    €270 Keskimäär. tarjous
    15 tarjoukset

    Hi Hamza A., can you use mechanical APDL?

    €91 (Avg Bid)
    €91 Keskimäär. tarjous
    1 tarjoukset

    Hi Ashraf S., do you know how to use Mechanical APDL?

    €91 (Avg Bid)
    €91 Keskimäär. tarjous
    1 tarjoukset

    I have designed a rotary to linear output machine. I need an Industrial Physicist to verify my efficiency output!

    €32 / hr (Avg Bid)
    €32 / hr Keskimäär. tarjous
    20 tarjoukset
    Build us a Website Loppunut left

    Basically we are in to HR Placement Services and provides manpower on Contract basis to Electronics, Mechanical and Electrical manufacturing company across Mysuru and Bengaluru.

    €115 (Avg Bid)
    €115 Keskimäär. tarjous
    34 tarjoukset

    I am looking for English Professional Writer to create one blog post every month about engineering (Civil, Architectural, Mechanical, electrical, Interior, etc.) to be added to our website blog. The agreement will be long-term and the payment will be per post. The writer has to have full capability to create engineering authentic posts that can be read in 10 min maximum. The writer can't copy articles from other websites, it has to be new and built based on reading, rephrasing, knowledge, etc.

    €9 / hr (Avg Bid)
    €9 / hr Keskimäär. tarjous
    63 tarjoukset

    Kindly check the reference Image of Starwheel. Also, check this video to learn its usage: I am looking for someone with a mechanical background who can design a starwheel for a liquid filling machine that can adjust itself to hold multiple size(Diameter) bottles. There is a company that makes adjustable starwheels () and also there are certain patents that you can find on google which might help you design it. Links that might be helpful: 1. 2. 3.

    €117 (Avg Bid)
    €117 Keskimäär. tarjous
    22 tarjoukset

    Need a data set of Mechanical, Electrical, Electronics, and Civil engineers who are actively exploring opportunities

    €1120 (Avg Bid)
    €1120 Keskimäär. tarjous
    12 tarjoukset

    Drafting of ongoing mechanical electrical and mechanical switchboards Looking for someone who has experience in electrical drafting with autocad electrical. Timeframe is 3-4 weeks

    €576 (Avg Bid)
    €576 Keskimäär. tarjous
    22 tarjoukset

    I am requiring a dated mechanical engineering report, on letterhead, with the authors name, occupation, and qualifications, that states: - You have read and understood the information presented in our Claim (this will be supplied). - It is industry standard in Australia NOT to re-use torque-to-yield bolts in the cylinder head of a vehicle. - That re-use of TTY bolts can lead to engine failure. - That re-use of the bolts could result in a lack of compression and cause the "Oil Pressure" warning to display. - That if the engine fails as a result of TTY bolts being reused, it is possible, or even probable, that damage to the engine may have been done, regardless of whether the failed bolts have since been replaced. - That this damage could lead to total engine failure. Th...

    €293 (Avg Bid)
    Kiireellinen Salassapitosopimus
    €293 Keskimäär. tarjous
    24 tarjoukset
    Product design Loppunut left

    We need a design for an assembly table based on our sketches, we are also looking for some mechanical expertise as the table would potentially be using air clamps

    €351 (Avg Bid)
    €351 Keskimäär. tarjous
    121 tarjoukset

    Suosituimmat mechanical design -yhteisöartikkelit