Flash curved text työt

Suodata

Viimeisimmät hakuni
Suodatusperuste:
Budjetti
asti
asti
asti
Tyyppi
Taidot
Kielet
    Työn tila
    1,933 flash curved text työtä löytyi, hinnoittelu EUR
    animated logo 6 päivää left

    Want to have Our LOGO (Norxe) in Neuropol Font animated from a curved line of dots into the norxe logo

    €41 (Avg Bid)
    €41 Keskimäär. tarjous
    33 tarjoukset

    ...an existing product concept. The product is an outdoor air quality sensor, which needs to have a feature that enables it to mount to trees or outdoor walls, on either flat, curved or corner surfaces. These will require some industrial design skills to create, model and render. The shape is geometric, but not just a square box. It will need a solar panel

    €438 (Avg Bid)
    €438 Keskimäär. tarjous
    42 tarjoukset
    Trophy icon Simple Badge Logo 25 päivää left

    ...be in only one colour: dark blue. The logo icon will be a school badge. It’ll have a shield on top with text banner at the bottom, similar to Harvard University badge. Within the shield will be an icon of a standing lion. Inside the curved text banner, which is below the shield, will be three letters “GLC”. Kindly have GLC in Anziano Pro Bold font

    €85 (Avg Bid)
    Taattu
    €85
    64 työtä

    ...model car. It's just the top and sides of the car, as I put this shell onto a separate chassis and wheels. Its a good STL file without mesh errors. Most of the surfaces are curved. The STL file is about 13 MB, and I could easily reduce the number of triangles to make it a smaller file, but it 3D prints well like it is. The shell is about 70 x 35 x

    €25 (Avg Bid)
    €25 Keskimäär. tarjous
    25 tarjoukset

    This job requires a highlighted spine to be added to a single image of a p...posite-highlighted-spine-man-physiotherapy-281724233?src=SIvKkhVp4qDfw1XuOGr1lw-1-83 Only the spine (no ribcage) should be included in the final edit. The spine should be curved very slightly to adjust the model's body posture as it won't be straight since she is lying down.

    €22 (Avg Bid)
    €22 Keskimäär. tarjous
    10 tarjoukset

    ...fairy tale * have resemblance of magic mushrooms, weed or drugs * be busy or full of images and text, less is more The label should: * Find inspiration in classic beer labels, but also be fresh and different * Find inspiration in the graceful and curved curves of the oystermushroom The size of the label is 60x100 mm [WxH] and is rectangular. The

    €120 (Avg Bid)
    Taattu
    €120
    44 työtä

    Attached screenshot, it is the circular curved shaped that goes into the second column. Thanks.

    €16 (Avg Bid)
    €16 Keskimäär. tarjous
    20 tarjoukset
    Trophy icon Minimalistic logo for a website Loppunut left

    ...have attached a couple of example logos with a stylised first letter of their brandname. 3. DO NOT POST EXISTING logos or designs please. 4. The logo text should be somewhat bold and slightly curved. Please feel free to post multiple suggestions. I will personally reply to each one of them and offer my feedback. PS: This is for a content publishing

    €10 (Avg Bid)
    Taattu
    €10
    85 työtä
    Trophy icon I need some Graphic Design Loppunut left

    I need a FB banner for my conference Text: The Joy of Teaching & Learning Requirements - Would like the colourful windmill (attached or something similar) on the banner, Background colour a cheerful yellow - needs our logo Teachers Matter on it - with added text 'Conference Day' at the bottom (see my example) I would like the banner

    €18 (Avg Bid)
    Taattu
    €18
    27 työtä

    ...righter to the right of the screen (to show the vision of the eyes) 5. Animation 1.07.00 - 1.13.00 Arrow with text pointing to toes text says "Toe Side Rail" 6. Animation 1.11.00 - 1.16.00 Curved Arrow line 7. Animation 21.00 - 1.27.00 Curved Arrow line 8. Animation 31.00 - 1.33.30 Arrow pointing Forward 9. Animation 48.11 - 1.53.40 Arrows pointing

    €120 (Avg Bid)
    €120 Keskimäär. tarjous
    27 tarjoukset
    Trophy icon Logo Design for a small business Loppunut left

    ...to follow the concept idea of the attached file, in other words: 1. the logo should contain a map of Florida, including the 'dots' representing the Florida Keys 2. the 2 curved lines in the attached file would be like a painting brush stroke 3. at the end of the brush stroke there should be a painting brush 4. the name of the company should be included

    €34 (Avg Bid)
    Taattu
    €34
    40 työtä

    I need 10 artistic animal models created in a low poly format. Artistic in the sense of looking like they're moving. E.g. a fox mid step, tail kind of curved. And an owl with its wings out looking like it's about to take flight. I don't need animations. Just the models as they stand. I want you to have creative freedom and an artistic flare. I would

    €248 (Avg Bid)
    €248 Keskimäär. tarjous
    38 tarjoukset

    I create car bumper covers using rubber sheets which are 1/16 of inch thick. I need someone to create sheet die that would ...using rubber sheets which are 1/16 of inch thick. I need someone to create sheet die that would allow me to fit a rubber sheet neatly (with no excess) over the car bumper's curved surface as illustrated in the attached photo.

    €124 (Avg Bid)
    €124 Keskimäär. tarjous
    42 tarjoukset

    I have 20 hi resolution photos of my vehicl...cool. there are some touch-ups too to clear power lines hanging around . that should be very high resolution for a 40 feet x 20 feet advertising board. * out put will be a curved panorama. that should be straitened to look cool * I need atleaset 10000 x 3200px output i have attached a sample final result

    €19 (Avg Bid)
    €19 Keskimäär. tarjous
    23 tarjoukset

    We need a t shirt design software which has functions similar to other companies which we will provide links to show. Example: Must have curved text function. Text and font gradients. Large clip art library Please understand the makings of a good design software before replying. We are willing to pay up to $500 maximum.

    €382 (Avg Bid)
    €382 Keskimäär. tarjous
    16 tarjoukset
    3D CAD file Loppunut left

    Need a curved shape drawn in CAD and extruded a certain length. Output must be both 2D PDF and 3D CAD file. Must be to scale.

    €23 (Avg Bid)
    €23 Keskimäär. tarjous
    84 tarjoukset
    Trophy icon CREATE A FUN SIGN FOR MY GARDEN CLUB. Loppunut left

    ...in Arizona, but I hate images of saguaro cacti. I would like a standing old fashioned wooden frame chalkboard with SUN LAKES GARDEN CLUB written in white chalk within the curved ribbon, like the old fashioned pumpkin photo I submitted. My favorite entries so far have terra cotta and green colors. I'll have to go back and look at your names. I'd

    €46 (Avg Bid)
    Taattu
    €46
    21 työtä
    Trophy icon create a label Loppunut left

    ...LID LABEL: I would like the "HEYWHITESMILE" changed to BLACK MAGIC. Above BLACK MAGIC, but below the white line should say Kayla & Jaylin's in a nice fancy font, curved like the bottom text. JAR LABEL: The teal line on the jar label should be changed to a silver/glittery silver but remain thin. Leave the FDA, 100% Natural, Recycled and Cruelity

    €42 (Avg Bid)
    Taattu
    €42
    14 työtä

    ...) - Capabilities to display live streaming using JW player. - Multi threading Approach to make the App crash free. - Custom video setting at run-time for optimized App. - Curved UI Library of videos - Seek Bar We need below outputs, if you're only capable to do one you can still submit your quote. 1) Android + Ios App for Cardboard. 2) Stream

    €747 (Avg Bid)
    €747 Keskimäär. tarjous
    10 tarjoukset

    ...southern California and we have a project that has a ceiling with multiple curves that we will be applying a paneling to. The issue we ran into is that with the ceiling being curved in multiple directions, a rectangular panel will be mounted and the edges of another rectangular pattern will not match to it. Think of it as a beach ball, putting a piece

    €587 (Avg Bid)
    €587 Keskimäär. tarjous
    39 tarjoukset

    ...ideally come from either 1 or 2 sheets of board (1200x2400mm) so they are cost effective. But we have a CNC machine in our factory so you can get creative when it comes to curved edges, board inserts for accessories, etc. Take a look at our website and the slatwall accessories and the ideas are endless - the slatwall accessories just need to fit.

    €121 (Avg Bid)
    €121 Keskimäär. tarjous
    12 tarjoukset

    Hi, I run a photography and videography business, Orphic. I'm looking to revamp the brand and need a clean, modern and minimalist logo. Ideally, I'd like a circle with curved text inside reading 'ORPHIC' and 'PHOTOGRAPHY + FILM'.

    €74 (Avg Bid)
    €74 Keskimäär. tarjous
    101 tarjoukset
    Trophy icon Design a Logo Loppunut left

    ...for all your efforts so far! General feedback: can you try to transport the (confetti) message somehow (minimalistic and clear though), in feminine style (for example finer/curved lines), not too much party/carnival flair. Maybe think of - love is in the air - (wedding confetti) but again not too much (minimalistic is preferred)? Black on white version

    €248 (Avg Bid)
    Taattu Sinetöity
    €248
    436 työtä

    ...mobile to move from site to site and easy to use and deploy with minimal training. Ideally work areas of 200’ long or more would be possible. Curved work areas are possible and being able to easily define curved work areas to the robot would be desirable. Some feed hose frictional drag will be possible (water hoses, soap hoses, vacuum hoses ) on the

    €34 / hr (Avg Bid)
    €34 / hr Keskimäär. tarjous
    9 tarjoukset

    I have curved tube step file I need you to straighten the tube and add a clamp at the bottom from a Solidworks file so I can attach it to my project as a handle.

    €25 (Avg Bid)
    €25 Keskimäär. tarjous
    18 tarjoukset
    Trophy icon ROAR - Girl power logo! Loppunut left

    * Need a logo de...is to include a lioness * I love the idea of the half feline face, half women (as attached) - to illustrate the inner lioness within the woman * Also love the concept of curved feminine lines, but with strength, like the roaring lioness in the attached image * Image is to be feminine but strong * Colours - use your imagination!

    €31 (Avg Bid)
    Taattu
    €31
    179 työtä

    Need to have a D3 template which implements curved connections/links between two nodes. The requirement is if there are more than two connections then they should be connected with clear edges like here [kirjaudu nähdäksesi URL:n] This link will assist with how to implement in D3: [kirjaudu nähdäksesi URL:n]

    €16 (Avg Bid)
    €16 Keskimäär. tarjous
    4 tarjoukset

    ...needing a design for a trigger mechanism that’s original and yet is not trying to reinvent the wheel. It will need to be Low profile, stainless steel and suit euro shafts (curved notch). If this is something you can help with please feel free to contact me (email preferred ) . You will need to do some research on existing trigger mechanisms so that

    €12 / hr (Avg Bid)
    €12 / hr Keskimäär. tarjous
    21 tarjoukset
    Logo Design Loppunut left

    I need a Logo designed for...budget is a bit modest. However, it will be made sure, that if the design is passed, the designer is commensurated in full. I need a simple logo having a 'lion face' and some text curved in a semicircle over it. Also, our slogan is 'One for all, All for one', so if that can be somehow imbibed in the design, it'd be a plus!

    €14 (Avg Bid)
    €14 Keskimäär. tarjous
    59 tarjoukset

    I have a very simple request for you. I need a 3D image in AutoCad of a curved rectange with a base stand coming from the middle. On the surface of the curved rectangle it should have: A protruding lattice of (connected) hexagons (like a honey comb from a beehive. Dimensions: Rectangle = 1m Width= 1m Hexagons = 10cm squared Hexagon depth should

    €71 (Avg Bid)
    €71 Keskimäär. tarjous
    46 tarjoukset

    Hi ARCDiM, I have a very simple request for you. I need a 3D image in AutoCad of a curved rectange with a base stand coming from the middle. On the surface of the curved rectangle it should have: A protruding lattice of (connected) hexagons (like a honey comb from a beehive.

    €18 (Avg Bid)
    €18 Keskimäär. tarjous
    1 tarjoukset

    Hi ARCDiM, I have a very simple request for you. I need a 3D image in AutoCad of a curved rectange with a base stand coming from the middle. On the surface of the curved rectangle it should have: A protruding lattice of (connected) hexagons (like a honey comb from a beehive.

    €18 (Avg Bid)
    €18 Keskimäär. tarjous
    1 tarjoukset

    Hi need a stamp to send to th...(obvisouly). Need to have all indications as per the attached 2 examples. Indication In the middle should apear the name of the brand : KAP Innovation Can be written linear or curved. Need to be original. I don t have a logo yet so this could be the genesis of it. A bit of creativity but not too much. Thanks, Fabien

    €22 (Avg Bid)
    €22 Keskimäär. tarjous
    28 tarjoukset
    Extend Smooth Life Loppunut left

    ...the Javascript implementation of Smooth Life at [kirjaudu nähdäksesi URL:n] [for a description of this code, see [kirjaudu nähdäksesi URL:n] ] in three specific ways: 1) Simultaneously display and animate a small number (2-6) of 2-D grids instead of a single grid like the current code does.

    €150 (Avg Bid)
    €150 Keskimäär. tarjous
    6 tarjoukset
    Trophy icon Rotating wire globe Loppunut left

    ...use this for reference: [kirjaudu nähdäksesi URL:n] (Please note that i'd like the lines to be spherically curved, unlike the reference video above) – the wire of the flat projection and the rotating globe should maintain a consistent (tubular) stroke thickness. Exported as a video for

    €248 (Avg Bid)
    Mainostettu Taattu Huippukilpailu
    €248
    19 työtä

    Please read text project. I use ST microcontroller STM32F103 and STP16CPC26XTR (16 channels led driver controller) The software can receive information via RS485 (serial port) and CAN BUS. You can receive 5 frames: Left Text (5 ASCII char) (5 bytes) Right Text (5 ASCIIchar) (5 bytes) State of linear bar, state of curved bar and state of arrows

    €53 (Avg Bid)
    €53 Keskimäär. tarjous
    7 tarjoukset

    Please read text project. I use ST microcontroller STM32F103 and STP16CPC26XTR (16 channels led driver controller) The software can receive information via RS485 (serial port) and CAN BUS. You can receive 5 frames: Left Text (5 ASCII char) (5 bytes) Right Text (5 ASCIIchar) (5 bytes) State of linear bar, state of curved bar and state of arrows

    €37 (Avg Bid)
    €37 Keskimäär. tarjous
    7 tarjoukset
    Trophy icon Design a Logo for Security company Loppunut left

    ... I will require all project files on completion - PSD, Illustrator etc. Colours to consider: Black, Red & White Creative Concept: A wire formed into the letter ‘Z’ (curved). One edge of the ‘Z’ to have an - rj 45 head (please google to find out what this is) and the other edge to have - Fibre optic (please google to find out what this is). In

    €31 (Avg Bid)
    Taattu
    €31
    209 työtä
    Trophy icon I need a logo for my new business Loppunut left

    ...hands become the branches. Or a woman in Goddess pose connected to mother earth, holding up the full moon in her hands. For each, "Yoginis" would be curved on top and "Rise" curved on bottom to portray a circle around the image, tying it all together. I am open to creativity but I don't want it to look cheap or too fake. I am looking

    €189 (Avg Bid)
    Taattu
    €189
    391 työtä

    Prepare CDR (Corel Draw) file from JPEG photo. CDR should be flat for laser cutting (not curved).

    €17 (Avg Bid)
    €17 Keskimäär. tarjous
    32 tarjoukset

    ...Follow-up orders in the form of business cards, stationery, etc. are possible if the work is well done. The logo - similar to the drawn one. TEXT: Mag. Birgit Schöppl Spirals, balls and ornaments are desired in curved shapes Font: Sans Serif Wide font no concrete symbol no hands no flowers and leaves Color : pink and graduations of pink. not too

    €98 (Avg Bid)
    Taattu
    €98
    118 työtä

    Hello, I designed a screwdriver gripper that needs to be mold. I need someone to make mold of the part I draw. It is a screwdriver gripper with curved surface and holes on the surface.

    €9 / hr (Avg Bid)
    €9 / hr Keskimäär. tarjous
    41 tarjoukset

    ...I need the characters manually traced and saved to a .dxf vector file format for laser cutting. The tracing must be an exact replica of the originals (for size and shape). Curved and Angled lines are to be smoothed. (zoom on existing file to see staggered line) There are several corrections required to letters with acute angles, eg. "W" where the existing

    €87 (Avg Bid)
    €87 Keskimäär. tarjous
    31 tarjoukset
    Trophy icon Design me a abstract photo Loppunut left

    Need an image file for visiting card. There should be a road (may be curved) with city/township on one side and nature: mountain/trees/lake on the other. Plus there must be a Force Traveler vehicle on the road; depicted from the back side. The entire picture should be abstract in colour and contrast. (Would prefer less colours). Sample attached

    €16 (Avg Bid)
    €16
    11 työtä

    We need a 8'x8' curved graphic design for a trade show display for a US mortgage firm. Specs for the display and Standard podium that comes with the display are found: [kirjaudu nähdäksesi URL:n]

    €78 (Avg Bid)
    €78 Keskimäär. tarjous
    26 tarjoukset
    Digitize a drawing. Loppunut left

    ...Bomba y Plena" must be added on top and "DiaspoCultura" below. I'd like multiple options including font type: Impact and with the phrases straight above and below and also curved forming a circular shape to compare and choose. Black & white would work. However, the idea is to do it in as less colors as possible but I'd like to see options whether it

    €82 (Avg Bid)
    €82 Keskimäär. tarjous
    40 tarjoukset

    ...together please. In the top half of the circle I want multicoloured paper doll shapes (I have a photo of an example) and curved around the bottom I want it to say Camera Junior. In the middle I want a camera with a star in the flash....

    €16 (Avg Bid)
    €16 Keskimäär. tarjous
    1 tarjoukset