Beagleboard c3 orcad työt

Suodata

Viimeisimmät hakuni
Suodatusperuste:
Budjetti
asti
asti
asti
Tyyppi
Taidot
Kielet
    Työn tila
    3,155 beagleboard c3 orcad työtä löytyi, hinnoittelu EUR
    Project for Nina K. Loppunut left

    ...aian välillä erilaisia nettijulkaisuihin liittyviä kirjoitus-, käännös-, SEO, some-julkaisuihin liittyviä tehtäviä ja näitä varten olisi hyvä löytää 1-2 freelanceria vakiintuneiksi kumppaneiksi, ettei aina tarvitse etsiä uusia / aloittaa alusta... Juuri nyt olisi tarvetta kääntää seuraavat sivut englanniksi: Näistä siis varsinainen sisältö, esim. blogi + authorin bio. Englanninkielinen sivusto on muutoin olemassa, näistä kahdesta sivusta puuttuu nyt käännökset. Miten onnistuisi sinulta? Aiheuttaako IT-slangi haasteita? Nyt kun tuntiveloituksista puhutaan, niin mikä olisi €/h ja kauanko arvioisit näihin aikaa menevän? O...

    €95 (Avg Bid)
    €95 Keskimäär. tarjous
    1 tarjoukset

    ...aian välillä erilaisia nettijulkaisuihin liittyviä kirjoitus-, käännös-, SEO, some-julkaisuihin liittyviä tehtäviä ja näitä varten olisi hyvä löytää 1-2 freelanceria vakiintuneiksi kumppaneiksi, ettei aina tarvitse etsiä uusia / aloittaa alusta... Juuri nyt olisi tarvetta kääntää seuraavat sivut englanniksi: Näistä siis varsinainen sisältö, esim. blogi + authorin bio. Englanninkielinen sivusto on muutoin olemassa, näistä kahdesta sivusta puuttuu nyt käännökset. Miten onnistuisi sinulta? Aiheuttaako IT-slangi haasteita? Nyt kun tuntiveloituksista puhutaan, niin mikä olisi €/h ja kauanko arvioisit näihin aikaa menevän? O...

    €1 / hr (Avg Bid)
    €1 / hr Keskimäär. tarjous
    1 tarjoukset
    Flare System Analysis 6 päivää left

    I am looking to conduct a flare system study to assess if the existing Flare System of Train 1, 2 & 3 is adequate to dispose the relief mass flow during different emergency situations considering all the relief loads from the entire facility (including Train 1, Train 2, Train 3, BOP of C3+, LNG storage and LPG storage and even the cleaning plant).

    €1346 (Avg Bid)
    €1346 Keskimäär. tarjous
    41 tarjoukset

    Necesito un programador que sepa de woocommerce y de php para modificar un archivo php del plugin de la impresora para que imprima el ticket cuando se genera un pedido en la tienda. Actualmente salen varios campos que he podido modificar porque son etiquetas como Pedido en lugar de order, Dia y hora etc, pero el problema es que no imprime bien el total de la suma del ticket aparece 0.00 y tampoco aparecen los datos del cliente, es como si no cogiera bien las variables de donde las tiene que coger pero a mi ya se me hablo inglés por lo que deberia de ser español.

    €28 (Avg Bid)
    €28 Keskimäär. tarjous
    12 tarjoukset
    Animation Video 8 tuntia left
    VARMENNETTU

    I want to develope an animation video like the one in the link. It should be in Portuguese (I can help and translate) Link:

    €141 (Avg Bid)
    €141 Keskimäär. tarjous
    90 tarjoukset
    Trophy icon Design for my car Loppunut left

    I want to decorate my car with graphics related to this theme. The company deals with roof construction, hence the example provided. I also attach a picture of just the car for the mockup. Apart from the space where it's written that I'll put the logo, the rest is open for graphics. I want designs for both the sides and the hood. The car model is Citroen C3, in case you don't want to use the attached picture. Note: The graphics must be vector-based. I'm looking forward to your ideas!

    €9 (Avg Bid)
    Taattu
    €9
    32 työtä

    ...joining it with the file name of the newly copied spreadsheet. For example the Cell C1 value is "Joe Bloggs" and the name of the new spreadsheet is "Copy of Verkflo 22-2-2024", the new spreadsheet file name should be renamed "Joe Bloggs Verkflo 22-2-2024". Now copy the list of Cell values given below from the spreadsheet whose ID is in Cell C1 over to the newly created spreadsheet. B2, C2 D2 C3 C4 D7 B8 B9 B10 B11 B12 B13, C13 B14 B15 B16 B17 B18 B19 B21 B22 B23 B24 B25 B26 B28 B29 B30 B31 B32 B34 B38 B39, C39 B40 B41 B42 B43 B45, C45 B46 B47, C47 B48 B49, C49 B50, C50 B51 B52, C52 B53, C53 B54 B55, C55 B56 B57, C57 B58, C58 B59, C59 B60,C60 B61, C61 B62 B63, C63 B65, C65 B66 B67, C67 B68, C68 B69 B71, C71 B72 B73, C76 B77 B78, C78 B79 B80, C80 ...

    €136 (Avg Bid)
    €136 Keskimäär. tarjous
    47 tarjoukset

    3 logo options + complete vector (source) files in .ai, .eps, .svg, .pdf, and .psd 1 Day Delivery 5 Revisions 3 concepts included Logo transparency Vector file Printable file Include source file I have attached a mock idea of something i like. I have the vector icon for the C3 image on mock logo.

    €26 (Avg Bid)
    €26 Keskimäär. tarjous
    85 tarjoukset

    Reference schematics shall be given in PDF. You need to redraw the schematics Deliverables 1 Editable schematics - Altium / OrCAD capture file Timelines: 1 Week

    €257 (Avg Bid)
    €257 Keskimäär. tarjous
    10 tarjoukset
    Schematics Design Loppunut left

    1. Reference schematics will be given. Need to redraw the schematics. 2. Additionally need to add the following functionality in schematics - 2.1 RTC support 2.2 On-Board Nand flash of 4GB capacity 2.3 Fast wireless charging support 2.4 UART Interface Deliverables 1 Editable schematics - Altium / OrCAD capture file Timelines : 1 Week

    €305 (Avg Bid)
    €305 Keskimäär. tarjous
    11 tarjoukset

    I'm looking for a talented designer to create a minimalist logo and branding for my company, Abhishek Bedi Designs & Construction. The chosen freelancer should be proficient in creating minimal yet striking designs and have prior experience in logo and branding w...engaging a freelancer who can convey the ethos of my brand effectively with their design skills. Tasks in detail are as: 1. Logo Designing - You may have a starting point as per the attached PDF, but more proposals and themes are highly appreciated. You can also propose for animation in the Logo 2. This is a Logo + Branding. I will need Branding for : a. Email b. Letterhead - A4 & A3 c. Envelope - C3 & C4 d. Stickers for Laptop and Car e. Laptop and iPhone mobile wallpapers Attached is a sample of what...

    €61 (Avg Bid)
    €61 Keskimäär. tarjous
    26 tarjoukset

    ...seamlessly blend them for optimal performance. **Requirements:** - Experience in designing large (>20x20 cm) PCBs. - Proficiency in multi-layer PCBs, capable of handling complex circuit integrations. - Strong knowledge in both analog and digital signal processing. - Ability to optimize design for signal integrity and power efficiency. **Ideal Skills:** - Expertise in PCB design software (e.g., OrCAD Altium Designer, KiCad, Eagle). - Familiarity with PCB manufacturing processes and guidelines to ensure design is manufacturable. - Experience in designing PCBs for high-speed digital and sensitive analog signals. - Good communication skills to collaborate on design iterations. This project not only demands technical expertise but also creativity and attention to detail. If you...

    €22 / hr (Avg Bid)
    €22 / hr Keskimäär. tarjous
    24 tarjoukset

    ...looking for an experienced professional who has worked with Panasonic Minas Servo Motor and Drivers. We have selected the following hardware for our project: Panasonic Minas Driver (MADLN05NE) - 4 No Panasonic Servo Motor (MHMF092L1U2M) - 4 No Delta Touch Screen (DOP-110WS) - 1 No Iron Core Magnetic Drive - 2 No Mitsubishi Driver (MR-J2S-10AMR-J5W3-222G) - 1 No Panasonic Position Sensor (PM-F45-C3) - 1 No Delta Touch Screen (DOP-110WS) will be used as the control panel to run all hardwares. (Kindly Note: We are not planning to use an additional PLC or micro controller). Touch Screen will have the following options: Servo Motor Linear Motor Linear Actuator Color Sensor Position Sensor START / STOP / RESET Clicking on each of the above will show all the units connected to t...

    €683 (Avg Bid)
    €683 Keskimäär. tarjous
    20 tarjoukset

    ...looking for an experienced professional who has worked with Panasonic Minas Servo Motor and Drivers. We have selected the following hardware for our project: Panasonic Minas Driver (MADLN05NE) - 4 No Panasonic Servo Motor (MHMF092L1U2M) - 4 No Delta Touch Screen (DOP-110WS) - 1 No Iron Core Magnetic Drive - 2 No Mitsubishi Driver (MR-J2S-10AMR-J5W3-222G) - 1 No Panasonic Position Sensor (PM-F45-C3) - 1 No Delta Touch Screen (DOP-110WS) will be used as the control panel to run all hardwares. (Kindly Note: We are not planning to use an additional PLC or micro controller). Touch Screen will have the following options: Servo Motor Linear Motor Linear Actuator Color Sensor Position Sensor START / STOP / RESET Clicking on each of the above will show all the units connected to t...

    €27945 (Avg Bid)
    €27945 Keskimäär. tarjous
    22 tarjoukset

    I'm looking to build an advanced API for a construction ma...within the system. Specific Features Needed: * **Margin Tracking:** The API should deliver details about profit margins on all current projects. Experience in .NET and a strong understanding of project management systems is essential. Knowledge in developing APIs, focusing specifically on construction business, would be ideal. FIGMA: Provider MUST share weekly updates in a meeting and also weekly updates on the GIT repository. Initial Database Structure: Base Application:

    €485 (Avg Bid)
    €485 Keskimäär. tarjous
    81 tarjoukset

    ...looking for an experienced professional who has worked with Panasonic Minas Servo Motor and Drivers. We have selected the following hardware for our project: Panasonic Minas Driver (MADLN05NE) - 4 No Panasonic Servo Motor (MHMF092L1U2M) - 4 No Delta Touch Screen (DOP-110WS) - 1 No Iron Core Magnetic Drive - 2 No Mitsubishi Driver (MR-J2S-10AMR-J5W3-222G) - 1 No Panasonic Position Sensor (PM-F45-C3) - 1 No Delta Touch Screen (DOP-110WS) will be used as the control panel to run all hardwares. (Kindly Note: We are not planning to use an additional PLC or micro controller). Touch Screen will have the following options: Servo Motor Linear Motor Linear Actuator Color Sensor Position Sensor START / STOP / RESET Clicking on each of the above will show all the units connected to t...

    €744 (Avg Bid)
    €744 Keskimäär. tarjous
    22 tarjoukset

    ...looking for an experienced professional who has worked with Panasonic Minas Servo Motor and Drivers. We have selected the following hardware for our project: Panasonic Minas Driver (MADLN05NE) - 4 No Panasonic Servo Motor (MHMF092L1U2M) - 4 No Delta Touch Screen (DOP-110WS) - 1 No Iron Core Magnetic Drive - 2 No Mitsubishi Driver (MR-J2S-10AMR-J5W3-222G) - 1 No Panasonic Position Sensor (PM-F45-C3) - 1 No Delta Touch Screen (DOP-110WS) will be used as the control panel to run all hardwares. (Kindly Note: We are not planning to use an additional PLC or micro controller). Touch Screen will have the following options: Servo Motor Linear Motor Linear Actuator Color Sensor Position Sensor START / STOP / RESET Clicking on each of the above will show all the units connected to t...

    €609 (Avg Bid)
    €609 Keskimäär. tarjous
    16 tarjoukset

    ...looking for an experienced professional who has worked with Panasonic Minas Servo Motor and Drivers. We have selected the following hardware for our project: Panasonic Minas Driver (MADLN05NE) - 4 No Panasonic Servo Motor (MHMF092L1U2M) - 4 No Delta Touch Screen (DOP-110WS) - 1 No Iron Core Magnetic Drive - 2 No Mitsubishi Driver (MR-J2S-10AMR-J5W3-222G) - 1 No Panasonic Position Sensor (PM-F45-C3) - 1 No Delta Touch Screen (DOP-110WS) will be used as the control panel to run all hardwares. (Kindly Note: We are not planning to use an additional PLC or micro controller). Touch Screen will have the following options: Servo Motor Linear Motor Linear Actuator Color Sensor Position Sensor START / STOP / RESET Clicking on each of the above will show all the units connected to t...

    €606 (Avg Bid)
    €606 Keskimäär. tarjous
    32 tarjoukset

    ...é por meio de SDK e realmente eu não entendo. Seria para integrar com o FlutterFlow. Então estou em busca de um desenvolvedor que consiga realizar essa integração, até mesmo no Pubdev há arquivos das duas máquinas, não sei se é o suficiente, porém pode ajudar. Aqui está a documentação das 2 plataformas para caso alguém se interesse: Pagseguro: Cielo: Meu objetivo é construir um sistema para máquina, em primeiro momento preciso apenas que faça possível a integração e deixe as ações prontas para

    €249 (Avg Bid)
    €249 Keskimäär. tarjous
    8 tarjoukset

    We are looking for a experienced professional who has worked with Panasonic Minas Servo Motor and Drivers. We have selected the following hardware for our project: Panasonic Minas Driver (MADLN05NE) - 4 No Panasonic Servo Motor (MHMF092L1U2M) - 4 No Iron Core Magnetic Drive - 2 No Mitsubishi Driver (MR-J2S-10AMR-J5W3-222G) - 1 No Panasonic Position Sensor (PM-F45-C3) - 1 No We will be using Industrial Raspberry Pi for the project. Delta Touch Screen (DOP-110WS) will be used as the control panel to run all hardwares. (Kindly Note: We are not planning to use an additional PLC or micro controller). Touch Screen will have the following options: Servo Motor Linear Motor Linear Actuator Color Sensor Position Sensor START / STOP / RESET Clicking on each of the above will show all t...

    €271 (Avg Bid)
    €271 Keskimäär. tarjous
    29 tarjoukset

    I'm looking for an experienced freelancer to convert a mixed-format PDF into a detailed OrCAD schematic for prototype development. The result should be a workable OrCAD file that I can use as a foundation for manufacturing a prototype. Here's what I need: - Conversion of a mixed-format PDF (both images and text) into OrCAD - A focus on critical details to create a functional schematic - Accuracy is crucial, but an exact replica isn't necessary; I just need a usable OrCAD file Ideal Candidate Should Have: - Experience with PCB design and schematic capture in OrCAD - Ability to interpret electronic schematics and component datasheets - Keen attention to detail and a focus on accuracy - Good communication skills and adherence to deadlines Y...

    €185 (Avg Bid)
    €185 Keskimäär. tarjous
    25 tarjoukset

    ...skilled in PCB design who can meticulously convert a basic electronics schema from a PDF into OrCAD format. The source document is straightforward with only a few components to replicate. What I'm looking for: - **Conversion Expertise**: Efficiently replicate the PDF schema. - **Attention to Detail**: Maintain accuracy of components and connections. - **OrCAD Proficiency**: Familiarity with the specified older version (*please message to confirm version*). - **Communication**: Open dialogue for any clarifications. Ideal Candidate: - Proven experience with OrCAD and PCB design. - Ability to deliver a clean, editable OrCAD file. - Prompt response to any adjustments needed. Project Deliverables: - An OrCAD file matching the PDF schema. - Confirmat...

    €26 (Avg Bid)
    €26 Keskimäär. tarjous
    11 tarjoukset

    ...does open a serial port on usb device to read some number and it sends over BLE we also have already the BLE part made in Arduino IDE but what we are missing is the part which opens the port and read the serial data from usb device we reckon we shall add add cdc_acm on Arduino Ide we can share the project ESP-IDF and the BLE part already made in Arduino IDE. We will need then adjustment for ESP32-C3 after the completion - **Key Functions**: - BLE (Bluetooth Low Energy) capabilities. - CDC_adm for USB communication. - Interact with serial devices. - **Skills and Experience**: - Proficiency in C/C++ and scripting for microcontrollers. - Previous experience with ESP32-S3 and Arduino IDE. - Understanding of USB communication protocols. - Knowledge in handling BLE func...

    €111 (Avg Bid)
    €111 Keskimäär. tarjous
    10 tarjoukset

    ...looking for an experienced professional who has worked with Panasonic Minas Servo Motor and Drivers. We have selected the following hardware for our project: Panasonic Minas Driver (MADLN05NE) - 4 No Panasonic Servo Motor (MHMF092L1U2M) - 4 No Delta Touch Screen (DOP-110WS) - 1 No Iron Core Magnetic Drive - 2 No Mitsubishi Driver (MR-J2S-10AMR-J5W3-222G) - 1 No Panasonic Position Sensor (PM-F45-C3) - 1 No Delta Touch Screen (DOP-110WS) will be used as the control panel to run all hardwares. (Kindly Note: We are not planning to use an additional PLC or micro controller). Touch Screen will have the following options: Servo Motor Linear Motor Linear Actuator Color Sensor Position Sensor START / STOP / RESET Clicking on each of the above will show all the units connected to t...

    €311 (Avg Bid)
    €311 Keskimäär. tarjous
    24 tarjoukset

    ...are looking for a experienced professional who has worked with Panasonic Minas Servo Motor and Drivers. We have selected the following hardware for our project: Panasonic Minas Driver (MADLN05NE) - 4 No Panasonic Servo Motor (MHMF092L1U2M) - 4 No Delta Touch Screen (DOP-110WS) - 1 No Iron Core Magnetic Drive - 2 No Mitsubishi Driver (MR-J2S-10AMR-J5W3-222G) - 1 No Panasonic Position Sensor (PM-F45-C3) - 1 No Delta Touch Screen (DOP-110WS) will be used as the control panel to run all hardwares. (Kindly Note: We are not planning to use an additional PLC or micro controller). Touch Screen will have the following options: Servo Motor Linear Motor Linear Actuator Color Sensor Position Sensor START / STOP / RESET Clicking on each of the above will show all the units connected to...

    €307 (Avg Bid)
    €307 Keskimäär. tarjous
    32 tarjoukset

    As the project owner, I require an experienced PCB designer from Pakistan to recreate old Orcad files in Altium. My preferences and needs are: - I will provide the original Orcad files for a PCB design of intermediate complexity. - I need someone with experience in handling complex circuit designs, which contain numerous components. - This project won't just be a simple conversion job. I need you to add certain components to the new Altium design based on my specifications. - Communication is crucial for this project. Hence, you should have a strong grasp of English. [Removed by Admin] Key skills: Altium Designer, PCB Layout, Circuit Design, Orcad.

    €138 (Avg Bid)
    €138 Keskimäär. tarjous
    26 tarjoukset

    As the project owner, I require an experienced PCB designer from Pakistan to recreate old Orcad files in Altium. My preferences and needs are: - I will provide the original Orcad files for a PCB design of intermediate complexity. - I need someone with experience in handling complex circuit designs, which contain numerous components. - This project won't just be a simple conversion job. I need you to add certain components to the new Altium design based on my specifications. - Communication is crucial for this project. Hence, you should have a strong grasp of English. Kindly contact me on Whatsapp a(removed by Freelancer.com admin). Key skills: Altium Designer, PCB Layout, Circuit Design, Orcad.

    €130 (Avg Bid)
    €130 Keskimäär. tarjous
    15 tarjoukset

    I'm looking for a proficient PCB designer, preferably from Pakistan, who excels in working with Altium. Your primary task will involve recreating old Orcad files in Altium. As these are redrawn, certain components should be added to the design based on my particular specifications. These additions include: - Resistors - Capacitors - Integrated Circuits (ICs) Prior experience is an essential criterion for this job. Please ensure to detail your relevant practice within PCB design and highlight any specific work within the consumer electronics industry, as this is my preferred sector. Moreover, if you have any experience of redesigning circuit boards with updated components, do include that in your application. Y(removed by Freelancer.com admin) for any clarifications or furthe...

    €121 (Avg Bid)
    €121 Keskimäär. tarjous
    4 tarjoukset

    ...com/pin/410672059788396650/ Require output in both PSD and CRD. Demonstration should be both as graphic and how it will look on Tshirt. I am okay with both front and back side designs. NOTE: DO NOT FOCUS ON THE WORD VEGAN. I AM MORE FOCUSSED ON THE STATEMENT + IMPACT. CHECK EXAMPLES PROPERLY. UPDATE: Inspiration should not be focus on making a statement but about helping spreading

    €56 (Avg Bid)
    Taattu Sinetöity Huippukilpailu
    €56
    136 työtä

    As the project owner, I require an experienced PCB designer from Pakistan to recreate old Orcad files in Altium. My preferences and needs are: - I will provide the original Orcad files for a PCB design of intermediate complexity. - I need someone with experience in handling complex circuit designs, which contain numerous components. - This project won't just be a simple conversion job. I need you to add certain components to the new Altium design based on my specifications. - Communication is crucial for this project. Hence, you should have a strong grasp of English. Kindly contact me on Whatsapp at +961 81 900568. Key skills: Altium Designer, PCB Layout, Circuit Design, Orcad.

    €200 (Avg Bid)
    €200 Keskimäär. tarjous
    15 tarjoukset

    ...habilidad de comunicación. Ejemplo de post para nuestro linkedin - con nuestro soporte e información ejemplo de blogpost para nuestra web - con nuestro soporte e información ¿Quieres unirte a nosotros? Envía lo siguiente a angelica(arroba=@) 1) Información Personal y Profesional: Envíanos tus datos de contacto y tu CV actualizado. Queremos conocerte mejor y entender tu trayectoria profesional. 2) Estado de Autónomo/a: Confirma que estás registrado/a como autónomo/a en tu país de residencia. Esto es crucial para garantizar que podemos

    €673 (Avg Bid)
    €673 Keskimäär. tarjous
    16 tarjoukset

    For my new ebook () i need a cover. Special: The ebook is the summary of my 19 ebooks. It includes all 19 ebooks in 1. The cover for amazon should be "collection" summarycover of all existing ones. Including: - the title "Aquarium A-Z - 19 in 1 Ratgeber - the keywordcloud - the mentioned USPs in the current version You find all single covers from the 19 ebooks at Format: An ideal ratio of height to width of at least 1.6:1, i.e: For every 1,000 pixels in width, the image should have 1,600 pixels in height.

    €15 (Avg Bid)
    Taattu
    €15
    49 työtä

    As I am transitioning to KiCad software, I am in need of an Electrical Engineer or a PCB designer who can convert my OrCAD schematic files into KiCad schematic files. Here are the specifics of the task at hand: - Complexity Level: You will be dealing with medium complexity circuits. So, a sound understanding and experience in dealing with such circuits is required. - Components: You don't have to worry about dealing with proprietary or obsolete components since all components in the circuits are standard. Ideal candidates for this task would be someone with significant experience in Electrical Engineering or PCB design, specifically familiar with both OrCAD and KiCad schematic files. Proficiency in file conversion and a meticulous approach to maintain circuit integrit...

    €77 (Avg Bid)
    €77 Keskimäär. tarjous
    16 tarjoukset

    ...memory, processor (CPU), etc. At this stage, the freelancer must send me the final project file to make it complete, the file must be in the pcb extension PCB file is a crucial document for the manufacturing and design of a circuit board. A. PCB file helps to create the layout for printing a circuit board. The most popular software for assembling a PCB file are: 1. Altium Designer 2. OrCAD 3. KiCad 4. EasyEDA 5. Eagle These software offer a variety of features for creating, simulating, analyzing and manufacturing printed circuits. They are used by electronics professionals around the world. But there is no limitation on the specific software, as long as the file follows the established format standard of the .PCB extension 2. Get recommendations from i...

    €109124 (Avg Bid)
    €109124 Keskimäär. tarjous
    9 tarjoukset

    Hi There, I would like you to do another scrapping, this the website (german jobboard) There are already criteria’s used in the link (see screenshot) I do need the following details: Company Name, City, Person in the job ad, position, e-mail and telephone number, the telephone number ist a must have. Could you do that?

    €112 (Avg Bid)
    €112 Keskimäär. tarjous
    121 tarjoukset

    Introduction to the Company Details on Our Products and Services Need-Based Software Development for Businesses All images from can be used in the ima...editing and sound quality. Inclusion of music and voice-over to reinforce the message. Provision of the final image film in high resolution and various formats. Example Videos from iStock:

    €102 (Avg Bid)
    Taattu
    €102
    11 työtä

    ...our lessons to the kids of families who can afford our classes and camps. But what about the other half of the kids? It is for the less affluent students that we formed a non-profit “Company B.” The idea is that the non-profit will accept grants and donations in order to pay the way for kids who cannot afford Company A camps and classes. Company B was recently approved by the IRS as a 501-c3 corporation, so donations made to this organization are fully tax-deductible. It is our hope that individuals and businesses will consider donating to this new organization as the year wraps up and giving budgets are expended. If you have any questions or would like to donate some money to Company B please email xxx. Thanks for your consideration and may you have a...

    €88 (Avg Bid)
    €88 Keskimäär. tarjous
    33 tarjoukset

    Hi, i have created a Ranking report dashboard for my clients, this will be the layout of the page: %5BCliente-Rafael%5D---Projeto-An%C3%A1lise-Concorr%C3%AAncia?type=design&node-id=1-4&t=3PQOs5SVuWdXkwFr-0&scaling=min-zoom&page-id=0%3A1 I need you to code this page on wordpress. And other important detail, i want to be able to import many clients csv, so i can build this reports in bulk, if you can help me with this solution too will be great. The goal is that i want to upload like 10 csv files, and they all build this above page with their data from csv. Let me know code 1020 on beginning of apllication to proof you read the description of my project.

    €90 (Avg Bid)
    €90 Keskimäär. tarjous
    71 tarjoukset

    We need someone who films and edit, needs to be around the location, we do not cover travel expenses. Thank you. Please check the briefing here: Check a post with photos of the store:

    €706 (Avg Bid)
    Paikallinen
    €706 Keskimäär. tarjous
    3 tarjoukset

    ...habilidad de comunicación. EJEMPLO DE POST PARA NUESTRO LINKEDIN - Con nuestro soporte e información EJEMPLO DE BLOGPOST PARA NUESTRA WEB - Con nuestro soporte e información ...

    €354 (Avg Bid)
    €354 Keskimäär. tarjous
    20 tarjoukset

    I am looking for a skilled freelancer who can improve the design of my Figma project and convert it into HTML, CSS, and JavaScript within a maximum of 5 days. The ideal candidate should have experience in the following: Specific Requirements: - Clean and well-structured code - Responsive design - Smooth animations and trans...Please note that the type of website we are improving the design for was not specified by the client. Project Timeline: - The client has requested the project to be completed as soon as possible. If you have the necessary skills and experience to meet these requirements, please submit your proposal. Thank you. This is the Figma file

    €438 (Avg Bid)
    €438 Keskimäär. tarjous
    141 tarjoukset

    ...Your expertise, either directly or indirectly, should cover: Embedded Programming and Hardware Designing PCB Designing Schematic/Circuit Designing PCB Assembling 3D Design and Printing Automation AI-assisted development App Development, both Android and iOS Web Application Development Your verifiable expertise should extend to tools like Altium, Eagle, KiCad, Orcad, Proteus EasyEDA, Solidworks, Fusion 360, Arduino IDE, STM32 IDE, MPLAB, MATLAB, Microchip Studio, Eclipse, Intellij, Netbeans, Atom, FlatCAM, Android Studio, XCode, VSCode, WinAVR. Avoid using copy/paste bids; only bid if you're proficient and capable of handling the jobs we offer. In your first reply, provide a comprehensive portfolio with references outside Freelancer fo...

    €335 (Avg Bid)
    €335 Keskimäär. tarjous
    53 tarjoukset

    I am looking for a freelancer who can help me set up the example code for Chronoamperometry and Square wave voltammetry on a potentiostat. The specific potentiostat model that I am using is Model A. The potentiostat that is currently being developed consists of an ESP32-C3 processor, with integrated WiFi and Bluetooth 5, and an Analog Devices AD5941 (which is compatible with the AD5940) analog front-end that is specifically intended for electrohemical and biological measurements. Analog Devices supply a sophisticated library with the AD5941 Evaluation board, including many examples of firmware for specific applications, such as Cyclic Voltammetry (CV), Square Wave Voltammetry (SWV) and Chrono Amperometry (CA). The example code for the above three measurement methods have been succ...

    €493 (Avg Bid)
    €493 Keskimäär. tarjous
    20 tarjoukset

    ...freelancer to help me with the design and development of a PCBa prototype. The main components of the project are the esp32 c3 super mini and the AD8232 sensor. The desired size of the PCBa prototype is small, less than 5cm x 5cm. I need assistance with sourcing the components for the project. The desired functionality of the AD8232 sensor in the project is ECG signal measurements and monitoring. I will need you do: - Components List - Circuit desing with EasyEDA - Fales for the manufacture of the PCBa - 3D Modeling base - Armed prototype of the system Ideal skills and experience for this job include: - PCB design and development - Expertise in working with the esp32 c3 super mini and the AD8232 sensor - Knowledge of sourcing components for PCBa prototypes - Experien...

    €25 (Avg Bid)
    €25 Keskimäär. tarjous
    8 tarjoukset

    My project is a simulation of a Wind-Diesel-Battery system using Orcad Pspice and Matlab/Simulink. The main purpose of the simulation is to to design and implement a Wind - Diesel Generator - Batteries hybrid power system that supplies communications infrastructure company remote off-grid base stations with different power sources while preventing power outages. Many of the company's base stations are located in remote areas where the energy supply is unstable or nonexistent. The power system should continuously supply the load of the communication tower. I have specific parameters set for the simulation, and I would like a the schematic and circuits files with the simulation results. With the help of a Freelancer expert, I am confident that a simulation of the system can be ...

    €134 (Avg Bid)
    €134 Keskimäär. tarjous
    13 tarjoukset

    ...conversion. If you have the necessary skills and experience, please submit your proposal along with examples of your previous work in audio conversion. Detailed instructions below Go to the following link:

    €16 (Avg Bid)
    €16 Keskimäär. tarjous
    8 tarjoukset
    Video for Website Loppunut left

    I want to obtain a video of approximately 10 seconds, free of copyright for an engineering website. Optimal HD quality and size of 960 x 540 px. I search a similar example: a) b) c)

    €22 (Avg Bid)
    €22 Keskimäär. tarjous
    28 tarjoukset

    I am looking for someone who can review an esp32 c3 mini circuit schematic for me. The complexity level of the circuit schematics is Intermediate but also small and I require recommendations for improvements only if there are any critical issues found. The turnaround time I am expecting for this project is 1-2 days. The successful freelancer must be knowledgeable in electrical engineering, understand schematic symbols and basic conventions, and have experience in schematic design. I am looking for someone with the ability to critically analyze and decipher schematic diagrams. I expect a thorough review of my small project; a full report on any issues identified should be provided. This is an excellent opportunity to utilize your electrical engineering background in a short-term, f...

    €13 (Avg Bid)
    €13 Keskimäär. tarjous
    27 tarjoukset

    Project Title: Digicert SSL Validation Type of SSL certificate needed: Extended Validation (EV) Project completion timeframe: ASAP Skills and Experience Required: - Expertise in Digicert SSL validation - In-depth knowledge of Extended Validation (EV) SSL certificates - Familiarity with the Digicer...completion timeframe: ASAP Skills and Experience Required: - Expertise in Digicert SSL validation - In-depth knowledge of Extended Validation (EV) SSL certificates - Familiarity with the Digicert platform and validation process we have issues validating our EV ssl, digicert requires a duns listing but dont have it.

    €10 / hr (Avg Bid)
    €10 / hr Keskimäär. tarjous
    6 tarjoukset