Autodesk cad catia työt

Suodata

Viimeisimmät hakuni
Suodatusperuste:
Budjetti
asti
asti
asti
Tyyppi
Taidot
Kielet
    Työn tila
    52,097 autodesk cad catia työtä löytyi, hinnoittelu EUR
    CAD design of enclosure 6 päivää left
    VARMENNETTU

    Heya there, i need a simpe design made in fusion 360, the enclosure will host a single 18650 battery, and two PCBs, with one USB C and one USB A. I need a good way to seal the enclosure, and a way to "slot" something like this battery into it. "" ive attatched a step file of what i imagine the enclosure to look like. time is of the essence so the faster you can complete the project the better, i realies it should be quick to do. enclosure will be 3d printed.

    €34 (Avg Bid)
    €34 Keskimäär. tarjous
    13 tarjoukset

    we have a piece of land in which i want to make a road network with minimal roads and divide it into levels in order to prepare it for construction. entrance and exit should be from the top. i am attaching an auto Cad drawing with actual levels.

    €28 (Avg Bid)
    Taattu
    €28
    2 työtä

    I will share the rest of the information with selected freelancer. But for this project a freelancer must be proficient in CAD ans have knowledge of molding allowances.

    €18 / hr (Avg Bid)
    €18 / hr Keskimäär. tarjous
    20 tarjoukset

    I have attached a JPEG Layout I want it to be converted to CAD Layout with all the details like windows furniture landscaping doors shown as per plan.

    €10 (Avg Bid)
    €10 Keskimäär. tarjous
    7 tarjoukset

    High-quality building permit set of documents with consistent, clean drawing file and drawing sheet formatting (font, line weights, layout, drawing layers, etc) - Floor plans (showing both existing, as-built conditions and proposed remodel including Imperial dimensions, furniture layouts, electrical, ceiling detail, FF&E labels ) - Photo-realistic 3D modeling showing detailed finishes, furniture, plumbing fixtures, lighting fixtures, (interior but sometimes exterior) - Interior elevations and details (including tile layout, trim, casework, base/casing, wall treatments, ceiling treatments, lighting, plumbing fixtures

    €591 (Avg Bid)
    €591 Keskimäär. tarjous
    32 tarjoukset
    Project for Desiree D. 9 päivää left

    Hi Desiree D., According to our previous discussion, I am awarding CAD 400 for revision of chapter 3, 4 and 5 in total of 110 pages. if you agree, I pay.

    €281 (Avg Bid)
    €281 Keskimäär. tarjous
    1 tarjoukset
    Lotus crown ring 5 päivää left

    I have a CAD that has had the numbers removed, it is a ring that I have supplied for my clients for a very long time, however, the jeweller I was working with is retired, I wasn't able to retrieve the...

    €19 / hr (Avg Bid)
    €19 / hr Keskimäär. tarjous
    16 tarjoukset
    Lotus crown ring Loppunut left

    I have a CAD that has had the numbers removed, it is a ring that I have supplied for my clients for a very long time, however, the jeweller I was working with is retired, I wasn't able to retrieve the original CAD, but I do have some pictures that will be able to help you and some rough weights. I am needing it in 9k yellow gold and the ring size will be a size 7 (o) I will also attach a photo of a previous finished version I have done in the past

    €90 (Avg Bid)
    Kiireellinen
    €90 Keskimäär. tarjous
    11 tarjoukset
    Nano capacitor 5 päivää left
    VARMENNETTU

    I have designed a novel capacitor that I want illustrated for engineering purposes. Prefer this done as a CAD Drawing. estimate 3 - 5 hours work

    €85 (Avg Bid)
    €85 Keskimäär. tarjous
    35 tarjoukset
    Architecture Office 5 päivää left

    I need CAD operators to convert my hand drawn design work into CAD drawings using revit and other state of the art software systems. Must be able to produce 3D imagery. I am a high end architect with my office in Oakland NJ. I want someone who is in the general vicinity so that office visits are possible as well as filed visits... See sample of work attached

    €47 / hr (Avg Bid)
    €47 / hr Keskimäär. tarjous
    16 tarjoukset

    Looking for someone who can make up CAD drawings for commercial printing press footprint with OEM equipment items. We would supply CAD files to make up the machine footprints required for Press and OEM equipment.

    €20 / hr (Avg Bid)
    €20 / hr Keskimäär. tarjous
    38 tarjoukset
    2d cad file needed 5 päivää left

    I need a drawing converted to a cad file do I can send to laser cutter

    €13 (Avg Bid)
    €13 Keskimäär. tarjous
    82 tarjoukset
    Auto cad 3 d 5 päivää left

    I have a CAD ready 3d model as nd I need to take a dimension and curve length from it

    €16 / hr (Avg Bid)
    €16 / hr Keskimäär. tarjous
    60 tarjoukset

    I have a scanned set of plans from the 1980s that detailed an extension to my property. They have significant yellowing with age, but need to be digitised so that I can make alterations in future. I am looking for someone with experience in vectorising older plans and producing a DXF. Thanks.

    €64 (Avg Bid)
    €64 Keskimäär. tarjous
    12 tarjoukset

    large coffee and barber shop based in usa It’s a simple autodcad work Looking forward for the best

    €18 / hr (Avg Bid)
    €18 / hr Keskimäär. tarjous
    45 tarjoukset

    Need help to create gcode for work with snapmaker original. I want to use inventer hsm so tool library need to be created and tool path Its to modify Hammond enclosure Solid created : -stock part -modified part -holding rig

    €80 (Avg Bid)
    €80 Keskimäär. tarjous
    5 tarjoukset
    Looking for an AutoCAD electrical Trainer 4 päivää left
    VARMENNETTU

    Hi, I am looking for an AutoCAD electrical trainer. Goal: Trainer will be given an industry standard electrical drawing. Trainer has to thoroughly train a student re-build the drawing in AutoCAD electrical from scratch. Address the queries of the student. Person should be able to address following issues 1. Good understanding of Auto cad electrical 2. competent enough to build complete set of drawings and thoroughly explain minute detail 3. Fluently able to communicate in English. 4. I appreciate if you are flexible with timings

    €10 / hr (Avg Bid)
    €10 / hr Keskimäär. tarjous
    7 tarjoukset

    I looking for a professional who is good at designing CAD models and analysis of the design. He/she should be able to design a product based on the given dimensions and requirements. Preferred: visiting the location and have a clear idea on the project so that nothing goes wrong and more understanding on the project. location Hyderabad

    €237 (Avg Bid)
    €237 Keskimäär. tarjous
    24 tarjoukset
    Solar PV Carport 7 päivää left

    The project is to design a solar PV carport using the resources provided. The initial design is to get the look right in CAD before rendering; I expect this to take only a few hours. The next part is to render the design, please note that is is made from sheet metal so should be extremely easy to render from CAD. The next phase is to check the mechanical strength of the design. The next phase is to make the designs modular using python for the various possible configurations of panels. This would include fitting different panel sizes. We would also like python to generate mechanical reports for all designs. Please get in touch for more information

    €14 (Avg Bid)
    €14 Keskimäär. tarjous
    1 tarjoukset
    UV Unwrapping 7 päivää left

    I am the founder of PASCAL Lab and the designer of the visual inspection training software Virtual Aesthetic Simulator (). I want to find a freelancer who can place UV on CAD objects such as this one (). I do not want to optimize the use of texture, nor superposition, just that all areas have an identical density (very important). How long does it take you for the linked model?

    €13 / hr (Avg Bid)
    €13 / hr Keskimäär. tarjous
    1 tarjoukset
    AUTODESK Inventor FEA 4 päivää left
    VARMENNETTU

    Hi I have to perform FEA(on inventor). I have my 3D drawing ready from CAD. There are some minor errors appearing when i try to perform FEA/stress analysis. My project is simple a hydraulic sheet bending+cutting machine. I need to perform FEA to show that my system can successfully Cut and Bend Mild-steel sheet

    €66 (Avg Bid)
    €66 Keskimäär. tarjous
    14 tarjoukset

    Hi if and only if you are familiar in Light Gauge steel structure apply please review the attached updated drawings. This is for LIGHT GAUGE STEEL structure instead of wood. Can you please review this and let me know what you would need to do to get them ready to submit to the City (do we still need calculations, for example?). They used the original CAD files with stamp, but of course we will need you to review everything first. After you review and update, we can send to PE to review and approve with his stamp, but first please do the review yourself. Tell me what is required and how quickly it can be done. Thank you. ---------------------------------------------------------------------------------- Dear Sir How are you? Attached pls find structural drawings made by our engineer. ...

    €591 (Avg Bid)
    €591 Keskimäär. tarjous
    22 tarjoukset
    I need a 3D CAD designer 4 päivää left
    VARMENNETTU

    I would like to find someone to 3D design a modern chic laptop cooling pad. We need the freelancer to help us manufacture the product as well

    €13 / hr (Avg Bid)
    Salassapitosopimus
    €13 / hr Keskimäär. tarjous
    68 tarjoukset
    Autodesk expert 4 päivää left

    In need of someone to design custom system for be experienced in designer transformers or electrical components.

    €412 (Avg Bid)
    €412 Keskimäär. tarjous
    23 tarjoukset

    Performs a range of duties including on-site septic design, surveying, computerized drafting, and technical assistance to the engineering and/or survey departments. May be responsible for assisting with the project management of select construction phase or sanitary design services.

    €32 / hr (Avg Bid)
    €32 / hr Keskimäär. tarjous
    31 tarjoukset
    custom house 4 päivää left

    i have hand drawing of a custom house i plan to build and i need someone to make it into a CAD drawing so i can have it engineered, the drawing is pretty accurate to scale 1 cube is 2 feet

    €1591 (Avg Bid)
    €1591 Keskimäär. tarjous
    64 tarjoukset

    large coffee and barber shop based in usa It’s a simple autodcad work Looking forward for the best

    €28 / hr (Avg Bid)
    €28 / hr Keskimäär. tarjous
    46 tarjoukset
    3D Model Print 4 päivää left

    I have an object that I need a CAD drawing for so I can 3D print it. Can send you pictures and measurements. Would just need to know the cost. Thanks

    €125 (Avg Bid)
    €125 Keskimäär. tarjous
    24 tarjoukset

    ...is to hire Designer with the following responsibilities: Responsibilities 1- Use software to Create/Edite 3D designs from a draft sketch, 2D-images or 3D Scans. 2- Improve 3D Sculpture model using sound judgment necessary to ensure proper fit and function. 3- Create 3D sculpture (High-poly, Low-poly) of people/Animals/products/abstract based on 3D CAD models 4- Optimize a 3D sculpture for sheet metal fabrication 5- Convert igs, step files to 3D CAD Solid Models 6- Turning a 3d Model to 2D (dxf) for 2D cutting and bending (sheet metal). 7- Setup all workshop/fabrication drawings for sheet metal cutting and assemblies including welding and bending details 8- Develop document and guild lines for assembling sculpture 9- Build specification packages, presentations, and product...

    €25 / hr (Avg Bid)
    €25 / hr Keskimäär. tarjous
    25 tarjoukset

    Reverse engineering (1:1) of 6 aluminium parts as per samples provided by customer: 04_01_UGA_Basisplatte 04_02_UGA_Grundkörper 04_03_UGA_Klemmkugel 04_04_UGA_Klemmkugel 04_05_UGA_Klemmstück_links 04_06_UGA_Klemmstueck_rechts Reverse enginnering (1:1) covers: - Complete design of mentioned parts in CAD; - Complete technical drawings (ready for manufacturing); Current offer also contains the delivery cost (Hungarian post standard parcel delivery) to Germany for provided smaples.

    €184 (Avg Bid)
    €184 Keskimäär. tarjous
    1 tarjoukset
    research project 3 päivää left

    ...Basement: 0’-0” First Floor: +11’-0” Second Floor: +25”-0” ROOF: +42’-0” Link/ Import the cleaned cad files and model all Structural/ Architectural elements. You need to model (insert) the furniture (table and chairs,) bathroom fixtures, reflected ceilings and lights (only L38 lights) in this model. Do your calculation for stairs and model stairs. (It’s okay if your stairs are not consistent with what show on the drawings, but they must be constructible.) Open a Revit System Template file (Link the Architectural/ Structural model (Internal Origin to Internal Origin)) and model duct works and diffusers for the basement level. Mechanical equipment and devices like fans, etc. are optional. (Use CAD files and the PDF file) ...

    €549 (Avg Bid)
    €549 Keskimäär. tarjous
    23 tarjoukset
    research project -- 2 3 päivää left
    VARMENNETTU

    ...Basement: 0’-0” First Floor: +11’-0” Second Floor: +25”-0” ROOF: +42’-0” Link/ Import the cleaned cad files and model all Structural/ Architectural elements. You need to model (insert) the furniture (table and chairs,) bathroom fixtures, reflected ceilings and lights (only L38 lights) in this model. Do your calculation for stairs and model stairs. (It’s okay if your stairs are not consistent with what show on the drawings, but they must be constructible.) Open a Revit System Template file (Link the Architectural/ Structural model (Internal Origin to Internal Origin)) and model duct works and diffusers for the basement level. Mechanical equipment and devices like fans, etc. are optional. (Use CAD files and the PDF file) ...

    €107 (Avg Bid)
    €107 Keskimäär. tarjous
    8 tarjoukset

    Wooden Pyramid 4 equal sides held in place by gravity pushing against each other. This is for CNC machine to cut each side where they lock into each other. It needs to show the angles! The thickness of the wood is 4cm.

    €53 (Avg Bid)
    €53 Keskimäär. tarjous
    50 tarjoukset

    Need experienced persons in Autodesk Civil3D to prepare large As built drawing from available topo project is time sensitive and need skills to find out problems in topo points if any.

    €530 (Avg Bid)
    €530 Keskimäär. tarjous
    19 tarjoukset

    Create a CAD file from a kitchen cabinet door (non-destructive scanning)

    €349 (Avg Bid)
    €349 Keskimäär. tarjous
    44 tarjoukset

    I'm looking for an interior designer to help me in developing a restaurant design. I'm working on 3D designs and I need help in CAD.

    €21 / hr (Avg Bid)
    €21 / hr Keskimäär. tarjous
    68 tarjoukset
    3d cad design 3 päivää left
    VARMENNETTU

    I have a product. I give the dimensions. I want to create 3d cad files, either in catia or nx or solidworks.

    €17 (Avg Bid)
    €17 Keskimäär. tarjous
    88 tarjoukset

    Hi, I need a 3D drawing of a double-groove pulley for a 3D printer. The (approximate) dimensions are as follows: - Outside diameter 40 mm - Inside bore diameter 7.5 mm - Height - 40 mm - Each groove - 15 mm. The picture is attached in a pdf file.

    €37 (Avg Bid)
    €37 Keskimäär. tarjous
    21 tarjoukset
    AUTOCAD Conversion: PDF to DWG (MEP) 3 päivää left
    VARMENNETTU

    1. MAIN OBJECTIVE • To convert M&E layouts, details, notes, texts, and tables from PDF to AutoCAD. No need to convert Architectural elements as Architectural plans provided as an X-REF. • To use/draw the files provided inside the folder “To be edited”. 2. SOFTWARE • Autodesk AutoCAD, saved down to 2013 version for accessibility. 3. WORK QUALITY • Accurate Dimension (no overridden Dimension) • If dimension is assumed, round up dimension, example assumed column size is 248x248 (round up to 250x250) • Use the correct Dimension or Leader Style • Use the correct layers • Convert all lines, circle, hatches, text manually (No software conversion) • All conversion to be dimension-ed properly, accurate and neat. • All repe...

    €18 (Avg Bid)
    €18 Keskimäär. tarjous
    57 tarjoukset

    I will pay CAD$100 to ubuntu expert who is able to provide me accurate technical solution of the below issue. Problem: I am using fresh installed Ubuntu 22.04 & 20.04 image. When I connect USB flash drive to USB type-c port of GFX card, system doesnot detect flash drive. Kernel messages are as follow: xhci_hcd 0000:0b:00.2 $ error while assigning device slot ID xhci_hcd 0000:0b:00.2 $ max number of devices this xHCI support is 64 usb usb 5-port 1 $ couldn't allocate usb_device xhci_hcd 0000:0b:00.2 $ command completion event doesnot match command xhci_hcd 0000:0b:00.2 $ ERROR mismatched command completion event Note: After system reboot, same USB flash drive is detected but after hotplug in OS, USB flash drive is not detected. More relevant data will be provided in pers...

    €82 (Avg Bid)
    Kiireellinen
    €82 Keskimäär. tarjous
    5 tarjoukset

    large coffee and barber shop based in dubai

    €504 (Avg Bid)
    €504 Keskimäär. tarjous
    67 tarjoukset

    Need someone to design a CAD model for a toy car, 1/10 model. Someone with experience and portfolio is needed.

    €359 (Avg Bid)
    €359 Keskimäär. tarjous
    53 tarjoukset
    research project 3 päivää left
    VARMENNETTU

    ...Basement: 0’-0” First Floor: +11’-0” Second Floor: +25”-0” ROOF: +42’-0” Link/ Import the cleaned cad files and model all Structural/ Architectural elements. You need to model (insert) the furniture (table and chairs,) bathroom fixtures, reflected ceilings and lights (only L38 lights) in this model. Do your calculation for stairs and model stairs. (It’s okay if your stairs are not consistent with what show on the drawings, but they must be constructible.) Open a Revit System Template file (Link the Architectural/ Structural model (Internal Origin to Internal Origin)) and model duct works and diffusers for the basement level. Mechanical equipment and devices like fans, etc. are optional. (Use CAD files and the PDF file) ...

    €129 (Avg Bid)
    €129 Keskimäär. tarjous
    15 tarjoukset
    Trophy icon Fantasy Portrait of Our Dejected Hero 10 päivää left

    DELIVERABLE: Original artwork. Nothing AI. DETAILS: Depict a 24 – 26 year old adventurer who has been rejected by a potential employer. He is outside a large building downtown, in a dirty city, dejected, smoking beside his treasured possession: a fantasy version the C3 Corvette. PAY: $100 CAD HOW TO APPLY: You will NOT submit your final entry. Instead, you will submit a sketch of what you WILL draw and a link to your portfolio. If you are chosen as the winner, you will produce the proposed art. BACKGROUND: Your artwork is actually illustrating a real business re-imagined as an adventure taking place in the 1970’s. CONTEXT: Imagine that the main character has just finished pitching his idea to travel to a remote island where the local population blames the constant s...

    €70 (Avg Bid)
    Taattu
    €70
    13 työtä

    Looking for someone to design a custom system for us. Must have experience in designer transformers or electrical components. Must be willing to sign an NDA. Must be willing to work with us on calls and texts during the lifetime of the project. Must understand mechanical simulations

    €125 (Avg Bid)
    €125 Keskimäär. tarjous
    33 tarjoukset
    Parking lot cad 6 päivää left

    Parking cad project and pdf version lot number 3

    €24 (Avg Bid)
    €24 Keskimäär. tarjous
    1 tarjoukset
    assignment 6 2 päivää left

    ...Basement: 0’-0” First Floor: +11’-0” Second Floor: +25”-0” ROOF: +42’-0” Link/ Import the cleaned cad files and model all Structural/ Architectural elements. You need to model (insert) the furniture (table and chairs,) bathroom fixtures, reflected ceilings and lights (only L38 lights) in this model. Do your calculation for stairs and model stairs. (It’s okay if your stairs are not consistent with what show on the drawings, but they must be constructible.) Open a Revit System Template file (Link the Architectural/ Structural model (Internal Origin to Internal Origin)) and model duct works and diffusers for the basement level. Mechanical equipment and devices like fans, etc. are optional. (Use CAD files and the PDF file) ...

    €126 (Avg Bid)
    €126 Keskimäär. tarjous
    18 tarjoukset
    container footing 2 päivää left
    VARMENNETTU

    County requires an engineering stamp on drawing for a footing for cargo containers. We have a CAD drawing for the footing for tornado/hurricane but county requres a stamp. Like we have a lot of theses in Stckton area.

    €379 (Avg Bid)
    €379 Keskimäär. tarjous
    24 tarjoukset
    Need a structural engineer stamp 2 päivää left
    VARMENNETTU

    We have a CAD drawing for a footing to support/hold down a 40' container in case of tornado/hurricane.

    €20 / hr (Avg Bid)
    Paikallinen
    €20 / hr Keskimäär. tarjous
    3 tarjoukset
    Cad Designer for cabin 2 päivää left

    I am looking for a freelancer that can do a CAD Drawing/Rendering job. This job is an 1100-1200 SQ FT cabin in the mountain. It needs to be scaled so I can see each room size/floor plan and 3-D rendering of the exterior. The outside will be a shed-type roof with board and batten siding. Also including decking.

    €853 (Avg Bid)
    €853 Keskimäär. tarjous
    77 tarjoukset