Attiny programming työt

Suodata

Viimeisimmät hakuni
Suodatusperuste:
Budjetti
asti
asti
asti
Tyyppi
Taidot
Kielet
    Työn tila
    64 attiny programming työtä löytyi, hinnoittelu EUR

    ...code developed for use in the Arduino IDE (assembly language includes ok) specifically for the ATTiny10 that would turn two lights on and off at random intervals. Since the ATTiny does not have a random number generator, you will need to develop a way to create pseudorandom on/off times as part of this project. The Tiny10 has two PWM outputs, so you

    €94 (Avg Bid)
    €94 Keskimäär. tarjous
    14 tarjoukset

    I need the code to realize an hygrometer/thermometer based on Atmel microcontroller (Attiny 85/ 84 or other avr microcontroller). I wish to read the values from the SHT 31-D sensor and proportionally rotate two stepper motors driven by DRV 8825. Each motor rotates a pointer on a dial to indicate humidity and temperature.

    €199 (Avg Bid)
    €199 Keskimäär. tarjous
    22 tarjoukset

    I need a programmer to write C code ...flicker by changing a variable in the code. This needs to be written in C (not assembler), so I can maintain it later (I program a lot in C for other microcontrollers, but the ATTiny 10 is giving me problems because of its reduced instruction set). This should be a relatively simple and straightforward project.

    €129 (Avg Bid)
    €129 Keskimäär. tarjous
    8 tarjoukset

    I need the Attiny10 firmware. I am going drive the tiny motor. We can discuss in details. I need someone who can finish in a short time and has long experience with Attiny programming.

    €22 (Avg Bid)
    €22 Keskimäär. tarjous
    7 tarjoukset

    I have modified a battery management project from Github. [kirjaudu nähdäksesi URL:n] The modification makes the cell monitors able to act independently of a host controller, and I have added a relay control board. I have completed the schematics and pcb layouts in KiCad, but need someone to review my work. Additionally I need some help with the code

    €81 (Avg Bid)
    €81 Keskimäär. tarjous
    8 tarjoukset

    Foll...relative to my categories to put inside my navigation menu on my ecommerce. The categories topics are: 1: Microcontrolers, Modules 2: Arduino, Raspberry pi, Tensilica, STM32, ATTINY, FPGA 3: Breadboard, Power Source, Network, Sensors, Modules, Relay (actuators), LED, CNC, Motor, USB, Memory, Infra-RED, Radio Frequency, Temperature, ASIC Chips

    €102 (Avg Bid)
    €102 Keskimäär. tarjous
    28 tarjoukset

    I need some design a...output pins? Or maybe another ATtiny with more native output pins like the ATtiny4313? Are there any suitable minimalistic, Digispark-like ATtiny development boards with more output pins and USB support? - What's a suitable transistor? I'd like to buy and assemble the parts by myself. I'd also like to do the programming.

    €28 / hr (Avg Bid)
    €28 / hr Keskimäär. tarjous
    23 tarjoukset

    ...prototyped using a Digispark. Major functionality is incoming power conversion (75v -> 5v), incoming voltage measurement, and current dump into a resistor network controlled by the ATtiny. Project scope is development of a BOM of SMD components based on the schematic and layout of a two-layer PCB. Scope could also include assembly and testing of the first few

    €483 (Avg Bid)
    €483 Keskimäär. tarjous
    38 tarjoukset

    ...temperature and umidity. It works quite well. Now I need a wireless sensor option. I have researched and found out that such sensors would possibly be based on Arduino Pro Mini or ATtiny and would include a transceiver such as nRF24L01+ and the DHT22 or some low-power sensor. Problem is I don't have sound experience with Arduino and hardware. So, I'm looking

    €147 (Avg Bid)
    €147 Keskimäär. tarjous
    27 tarjoukset
    EMBEDDED SYSTEM Loppunut left

    A simple DAC communication with Attiny 841

    €83 (Avg Bid)
    €83 Keskimäär. tarjous
    7 tarjoukset

    ...to the main board which will trick the printer into thinking the scanner section is still functioning. I will then write or contract out writing the code to run on an Atmel AtTiny chip which will listen for the scanner test and then respond with the correct string. I do not have a spectrum analyzer or digital scope so I am unable to capture the scanners

    €999 (Avg Bid)
    €999 Keskimäär. tarjous
    5 tarjoukset

    ...be active often - only spinning about 15 seconds a day on average. Stepper is not energized when not moving. Goal is 6 months battery life assuming very low power from the attiny when not in use. Would ideally like to be able to drive all off of 2 AA alkaline batteries but I think current may be an issue. Options in order of preference are: 2AA

    €165 (Avg Bid)
    €165 Keskimäär. tarjous
    23 tarjoukset

    We want to build a simple color sensor with LDR and RGB led. For this system we want to use STM8S003 or STM8S103. Also should support I2C connection to ...members can not speak english. And If you really read this Please start your proposals with STM8S103. Thank you. Example [kirjaudu nähdäksesi URL:n]

    €40 (Avg Bid)
    €40 Keskimäär. tarjous
    7 tarjoukset
    Write some Software Loppunut left

    We want to build a simple color sensor with LDR and RGB led. For this system we want to use STM8S003 or STM8S103. Also should support I2C connection ...continue to listen I2C ) RF OFF ( Will stop sending and receiving through RF. Only I2C. ) We just need codes for STM8S103 Example [kirjaudu nähdäksesi URL:n]

    €174 (Avg Bid)
    €174 Keskimäär. tarjous
    14 tarjoukset

    I have firmware for Attiny841 that provides a sensor/control network. Reliability is paramount. I'd like someone to evaluate our firmware and improve upon the reliability. There are 4 versions of the firmware for the attiny841. These 4 are all very similar but they provide slightly different functionality and respond to different commands (voltage, gpio, etc) And firmware for a master ...

    €521 (Avg Bid)
    €521 Keskimäär. tarjous
    32 tarjoukset

    Перевести hex файл(прошивку) микроконтроллера ATtiny 2313 в assembler или C с комментариями, сделать блок-схему программы и описать принцип работы

    €9 - €26
    €9 - €26
    0 tarjoukset

    We have a message waiting light that uses an Atmel Tiny 11 and need to re-wright the software to a ATtiny 25. Also need to add to detect the CLASS/FSK message waiting signal. Our company has been manufacturing message waiting light for twenty years. [kirjaudu nähdäksesi URL:n]

    €457 (Avg Bid)
    €457 Keskimäär. tarjous
    24 tarjoukset

    ...functionality 3. Design a PCB prototype - as small as possible - max size: 45x30mm Parts List: - not definitive - could be changed to meet the concept goal 1. MCU: ATmega/ATTiny/PIC - the cheaper the better 2. Step-down Voltage converter w/ efficiency >95% : [kirjaudu nähdäksesi URL:n] or simmilar 3. LED CREE XMLB: [kirjaudu nähdäksesi URL:n] 4. 4x buttons

    €638 (Avg Bid)
    €638 Keskimäär. tarjous
    22 tarjoukset
    designing a pcb Loppunut left

    we need a pcb designer who can work with arduino attiny 85 micro controller and design our required idea. we have the code, all he needs to do is make it " ready for pcb design"

    €15 (Avg Bid)
    €15 Keskimäär. tarjous
    6 tarjoukset

    ...FS-GT2B or FS-GT3C 2.4Ghz transmitters b) To work off a single cell 3.7v LiPo battery . c) Circuits to be reverse voltage protected. d) Atmel based processor (Arduino, ATtiny etc) with firmware included. e)Microcontroller is to be externally programmable via pads on side of board using FTDI TTL 232R 3v3 USB or similar. f) Reversible Electronic

    €447 (Avg Bid)
    €447 Keskimäär. tarjous
    12 tarjoukset

    ...CHANGE A BIT.... Its a custom software for attiny84a-mu.... need make some changes to menu structure and insert a function to fire metronome. You should be able to work with attiny microcontrollers. I think this line is a problem ... if ([kirjaudu nähdäksesi URL:n] && mode2.s > 1 && mode2.s <= 4 && [kirjaudu nähdäksesi URL:n] == [k...

    €4 / hr (Avg Bid)
    €4 / hr Keskimäär. tarjous
    16 tarjoukset

    Hello...are you good with C and microcontrollers? I have one small assign if you are interested FIX C PROGRAM... CHANGE A BIT.... Its a custom times sof...CHANGE A BIT.... Its a custom times software fo attiny84a-mu.... need make some changes to menu structure and insert a function to fire metronome. are you able to work with attiny microcontrollers?

    €4 / hr (Avg Bid)
    €4 / hr Keskimäär. tarjous
    1 tarjoukset

    Its a custom times software fo attiny84a-mu.... need make some changes to menu structure and insert a function to fire metronome. are you able to work with attiny microcontrollers?

    €19 (Avg Bid)
    €19 Keskimäär. tarjous
    2 tarjoukset

    Its a custom times software fo attiny84a-mu.... need make some changes to menu structure and insert a function to fire metronome. are you able to work with attiny microcontrollers?

    €6 / hr (Avg Bid)
    €6 / hr Keskimäär. tarjous
    2 tarjoukset
    Write some Software Loppunut left

    Converting a code originally for Arduino and port it to attiny chip

    €122 (Avg Bid)
    €122 Keskimäär. tarjous
    12 tarjoukset

    ...need code, that would be some sort of similar to these: [kirjaudu nähdäksesi URL:n] So I need a code for AVR controller, for example: Amtel ATTINY 2313. The example of compiled files are in the link above. So, it need to send commands to AVR-controller from PS via usb port. And AVR controller should switch relays according

    €9 - €26
    €9 - €26
    0 tarjoukset

    Hardware already exists. It's a timer with mentioned above microcontroller. It's operated by the switch and has vibration motor.

    €122 (Avg Bid)
    €122 Keskimäär. tarjous
    3 tarjoukset

    Write simple code for microcontrollers like atmel attiny or microchip pic18.

    €2064 (Avg Bid)
    €2064 Keskimäär. tarjous
    20 tarjoukset
    ATTiny programmer Loppunut left

    need program written for ATTiny45 chip. The electronics has been built. Engineer to be based in Witwatersrand.

    €106 (Avg Bid)
    €106 Keskimäär. tarjous
    2 tarjoukset

    AVR I am looking for someone to write the code either assembler for AVR ATtiny85 micro-controller. The code is to do the following. On an event (input) to the Attiny 85 it is to give an output which is to light a LED and sound a buzzer for 1 minute. The LED is to stay on until the input is removed. The buzzer will be silenced when a button is pressed

    €66 (Avg Bid)
    €66 Keskimäär. tarjous
    5 tarjoukset

    AVR I am looking for someone to write the code either assembler for AVR ATtiny85 micro-controller. The code is to do the following. On an event (input) to the Attiny 85 it is to give an output which is to light a LED and sound a buzzer for 1 minute. The LED is to stay on until the input is removed. The buzzer will be silenced when a button is pressed

    €52 (Avg Bid)
    €52 Keskimäär. tarjous
    1 tarjoukset
    Write some Software Loppunut left

    AVR I am looking for someone to write the code either assembler for AVR ATtiny85 micro-controller. The code is to do the following. On an event (input) to the Attiny 85 it is to give an output which is to light a LED and sound a buzzer for 1 minute. The LED is to stay on until the input is removed. The buzzer will be silenced when a button is

    €523 (Avg Bid)
    €523 Keskimäär. tarjous
    4 tarjoukset

    I need a sketch for attiny85 using arduino code, to run 15 ws2812 leds. Adafruit have a library for them here [kirjaudu nähdäksesi URL:n] The pixels are on pin 3. I have made software to send 45 8 bit values via serial @ 9600 to configure the colors. The output looks like this-> 25500000000000006400012819212812800025512819200025512800025500025512806425512825525500025525500012...

    €22 (Avg Bid)
    €22 Keskimäär. tarjous
    4 tarjoukset

    The project involves mainly around an AVR (ATTiny series) measuring freq. from an oscillator and adjusting it according to required input from the user. Oscillator bias is done using a current sink that must be stable and accurate. The final application would require modification of a schematic I already have (in Altium) and writing C code for the MCU

    €587 (Avg Bid)
    €587 Keskimäär. tarjous
    28 tarjoukset

    I am testing a bluetooth board. This board is based on ATtiny Microcontorller. The device has led lights and lithium-ion battery. The device has to search and connect to smartphones.

    €138 (Avg Bid)
    €138 Keskimäär. tarjous
    22 tarjoukset

    I have board that can generate a sound. It is using an ATTiny 85 but the memory is too small and cannot produce the sound to a desired quality. I want to use an Atmega328 or equivalent to generate the good sound quality.

    €375 (Avg Bid)
    €375 Keskimäär. tarjous
    15 tarjoukset

    Hi, I need customized V-USB for specific HID Class (Details will be provided) on Attiny 85. I need compiled source code. V-USB Ref: [kirjaudu nähdäksesi URL:n] Thanks

    €174 (Avg Bid)
    €174 Keskimäär. tarjous
    1 tarjoukset

    ...size possible no larger than 0.75" x 0.75" Attiny 84 processor Dual H-Bridge TB6612FNG to control 2 brushed DC motors Read 2 inputs from a RC receiver Software specs: I have a sample sketch which works with an Arduino Leonardo. The code would need to be ported or rewritten to work with the ATtiny The code reads the inputs from the receiver

    €208 (Avg Bid)
    €208 Keskimäär. tarjous
    10 tarjoukset

    I would like the basic implementation of I2C set up using an ATtiny1634. I would like one ATtiny1634 to act as the I2C master so this must be a software implementation as only slave is supported by hardware. I would like another ATtiny1634 to act as a slave from which the master can acquire some information. Eventually I will also be reading from a BQ27541 using that I2C master, but hopefully I...

    €228 (Avg Bid)
    €228 Keskimäär. tarjous
    14 tarjoukset

    programar attiny para obter um controlador para leds. A cada impulso na entrada é apresentado um número binário de 4 bits a ser escolhido de uma memória. Um impulso longo e retorna ao zero.

    €200 (Avg Bid)
    €200 Keskimäär. tarjous
    5 tarjoukset

    ...should contain a charging protection circuit, a 5V 3A DC Converter and a current limiter circuit (2A and 1A). Furthermore, the circuit will need to some connections to an Attiny Microcontroller to check the battery voltage and to display it through one RGB Led. In terms of the Microcontroller you will not need to code anything. Just the raw circuit

    €167 (Avg Bid)
    €167 Keskimäär. tarjous
    3 tarjoukset

    I require a program to be written for the Attiny 85 micro controller, preferably written in the Arduino IDE. It is required to decode an IR signal received from any brand/protocol of IR remote (TV, DVD, SAT etc.) via an IR receiver and compute a unique ID for that button push. It must be recorded in EEPROM to be retrieved on power up. While waiting

    €98 (Avg Bid)
    €98 Keskimäär. tarjous
    7 tarjoukset

    I require a program to be written for the Attiny 85 micro controller, preferably written in the Arduino IDE. It is required to decode an IR signal received from any brand/protocol of IR remote (TV, DVD, SAT etc.) via an IR receiver and compute a unique ID for that button push. It must be recorded in EEPROM to be retrieved on power up. While waiting

    €117 (Avg Bid)
    €117 Keskimäär. tarjous
    8 tarjoukset

    ...circuit that connects BLE module to stepper motor (via ATTINY or some equally cheap programmable microcontroller). This thing will be battery powered - ideally a button battery so power conservation is important. I've seen some pretty straightforward circuits online for ATTINY and Stepper, or ATTINY and Bluetooth LE but found nothing specific for all

    €170 (Avg Bid)
    €170 Keskimäär. tarjous
    6 tarjoukset

    ...of the 3 switches to make this change "on the fly" rather than solder joint. 4. IC chip (Prefer the ATTINY series) to be programmable. The layout should permit attachment points at each IC lead to attach cable connector to permit- On Board Programming of the IC. 5. Must maintain the set 8-AMC7135 regulators or 2800 milliamp output current Other

    €679 (Avg Bid)
    €679 Keskimäär. tarjous
    15 tarjoukset

    Someone already started, and delivered a design, based on atmel attiny 85, to delay a flash signal for an adaptable amount of msec. What is required now is some code, can be arduino, but can also be direct c, to make this design work: microprocessor measures preflash to be issued by digital cam, and sends trigger signal to trigger with delay. push

    €156 (Avg Bid)
    €156 Keskimäär. tarjous
    8 tarjoukset

    ...solder pads for switch matrix and battery, and a connector slot for the microsd card. The power is to be supplied by a 3.7V or less battery. Microcontroller should be ATTiny or ATmega with Atmel picoPower. The switch matrix is 4x4. PCB design Maximum dimensions (MAX, smaller is better) ----------------------------------------------- Length:40mm

    €218 - €654
    Mainostettu Sinetöity
    €218 - €654
    10 tarjoukset

    need a flash trigger delay based on attiny... alike seagull syk-5, but delay is not based on counting preflash, it is based on microseconds...

    €208 (Avg Bid)
    €208 Keskimäär. tarjous
    6 tarjoukset

    Looking for a small device alike syk-5 remote flash controller for digital foto. Alike SYK-5, but smaller and based on ATTINY, if possible...Anybody?

    €58 (Avg Bid)
    €58 Keskimäär. tarjous
    4 tarjoukset