Suodata

Viimeisimmät hakuni
Suodatusperuste:
Budjetti
asti
asti
asti
Tyyppi
Taidot
Kielet
    Työn tila
    23 alibre design työtä löytyi, hinnoittelu EUR

    Hello Are you using Alibre for mechanical engineering? I have many different projects all the time, but I don't have time to finish them. Is it possible that you could help me? I use Alibre and that's why it would be good if you also have same software. Br. Mikael Vasa, Finland

    €9 / hr (Avg Bid)
    €9 / hr Keskimäär. tarjous
    1 tarjoukset

    ...project for anyone with Alibre Design experience. Having problems with constraints on an existing design. Just need to have the following constraints on the attached design. See mockup attached when reading through the required contraints below. Actual part is attached as well. : 1) Distance between A circumference and B circumference is .25 inches. 2) Distance between B circumference and C circumference is .40 inches. 3) Radius of B circumference 1.25 inches. 4) Radius of C is Radius of B - Constraint #2. 5) Can only directly change the radius of B. Relative radius of A and C will remain constant 6) E is the gap between the D archs. When you change the radius of B this gap needs to remain constant at .132174 Needs to be compatible with ...

    €75 (Avg Bid)
    €75 Keskimäär. tarjous
    14 tarjoukset

    I am wanting to have an object printed by a 3D Printer and all I need is for someone to take my specs and mock drawing and make it. It is a very simple object it's just I don't have the software of the knowledge on how to make it. It should take only a few minutes and I want it done shortly thereafter. Acceptable softwares to use: AutoDesk 3DS...wanting to have an object printed by a 3D Printer and all I need is for someone to take my specs and mock drawing and make it. It is a very simple object it's just I don't have the software of the knowledge on how to make it. It should take only a few minutes and I want it done shortly thereafter. Acceptable softwares to use: AutoDesk 3DS Max AutoDesk 123D SketchUp Blender SolidWorks AliBre needs to...

    €53 (Avg Bid)
    €53 Keskimäär. tarjous
    39 tarjoukset

    I am wanting to have an object printed by a 3D Printer and all I need is for someone to take my specs and mock drawing and make it. It is a very simple object it's just I don't have the software of the knowledge on how to make it. It should take only a few minutes and I want it done shortly thereafter. Acceptable softwares to use: AutoDesk 3DS...wanting to have an object printed by a 3D Printer and all I need is for someone to take my specs and mock drawing and make it. It is a very simple object it's just I don't have the software of the knowledge on how to make it. It should take only a few minutes and I want it done shortly thereafter. Acceptable softwares to use: AutoDesk 3DS Max AutoDesk 123D SketchUp Blender SolidWorks AliBre needs to...

    €45 (Avg Bid)
    €45 Keskimäär. tarjous
    32 tarjoukset

    ...possibilities! Johnny Ramirez Director Product Architect 619 379-1471 PROJECT FOR: We want our 3d product file illustrated so we can use it in our 3d programs. Our product is a small hand held electronic product. You can see it at I have 3d files currentlyin Alibre the new version which we dont have is called Geo Magic from 3d Systems. Would like 3d photo realistic illustrated file illustrated. A file or files output that we could use in variuos 3d programs Lightwave, Alibre, Keyshot etc.... TIME LINE ASAP Thank you! Johnny GearFlo.com...

    €157 (Avg Bid)
    €157 Keskimäär. tarjous
    14 tarjoukset

    Basically teh step to be coded in the plugin are 1) Take the current View of the 3D Model 2) Create a Viewpoint 3) Generate a New Drawing 4) Place a Front View of the View Point In the Drawing 5) Export the Drawing as an Autocad DWG You can get a 30 day trial of Cubify Design (). Cubify is an Alibre (Geomagic) product I would like this done know (in the next 4-6 hours). I have attached a file of the CHM. This is a reasonable time frame I think. If not please let me know. Code to be supplied (C# .NET)

    €359 (Avg Bid)
    €359 Keskimäär. tarjous
    1 tarjoukset

    Hello I need someone who can convert a .jpg, .gif, etc to a .dxf or .dwg file for AutoCad. The .dxf files will be used for lasercutting & the .dwg files will be used for milling. I need someone who is experienced in this type of work so that it goes smoothly without a bunch of revisions. This will be ongoing work so if I find someone who can do the work properly I'...this bid request. 3) All deliverables will be considered "work made for hire" under U.S. Copyright law. Buyer will receive exclusive and complete copyrights to all work purchased. (No GPL, GNU, 3rd party components, etc. unless all copyright ramifications are explained AND AGREED TO by the buyer on the site per the coder's Seller Legal Agreement). ## Platform AutoCAD for DXF files & Al...

    €68 (Avg Bid)
    €68 Keskimäär. tarjous
    13 tarjoukset

    Wir benötigen ein 3D Animationsvideo unserer Pelletheizung für unsere Webseite. Die Heizung liegt in 3D Alibre CAD vor. Wir können die Konstruktion als step Datei liefern. Ich stelle mir Kamerafahrten durch die Funktionen und Besonderheiten der Heizung vor. Weiter soll man sehen wie die Verbrennung funktioniert, Pellets gefördert werden, der Brenner und die Wärmetauscherreinigung arbeitet. Also auch wie sich die Bauteile bewegen Schnecke, Hubbewegung, Pellets einfördern bzw. einblasen. Der Betrachter soll innerhalb von 3-4 Minuten verstehen wie die Anlage arbeitet. Es sollte ähnlich aufgebaut werden (Qualität, Rendering, Funktionsweise der Heizung) wie das folgende Video, jedoch passend zu unserer Heizung. Etwas andere Konstruktion. ...

    €909 (Avg Bid)
    €909 Keskimäär. tarjous
    6 tarjoukset

    Wir benötigen ein 3D Animationsvideo unserer Pelletheizung für unsere Webseite. Die Heizung liegt in 3D Alibre CAD vor. Wir können die Konstruktion als step Datei liefern. Ich stelle mir Kamerafahrten durch die Funktionen und Besonderheiten der Heizung vor. Weiter soll man sehen wie die Verbrennung funktioniert, Pellets gefördert werden, der Brenner und die Wärmetauscherreinigung arbeitet. Also auch wie sich die Bauteile bewegen Schnecke, Hubbewegung, Pellets einfördern bzw. einblasen. Der Betrachter soll innerhalb von 3-4 Minuten verstehen wie die Anlage arbeitet. ACHTUNG: Wir suchen Freelancer bevorzugt aus Deutschland, Österreich oder Schweiz (deutschsprachig)

    €756 (Avg Bid)
    €756 Keskimäär. tarjous
    5 tarjoukset

    Draftsperson to draw 3D solid models of loudspeaker cabinets, metalwork and assemblies in Solidworks or Alibre (Geomagic Design). Must have own laptop with copy of either software and be able to communicate via Skype with engineer.   Candidate should be detail oriented, fast and accurate, with a good attitude and strong proficiency in the 3D solid modeling software. Knowledge of cabinet joinery and CNC manufacturing processes' helpful.  Job entails visual creativity: design and inspired rendering skills encouraged, along with an interest in music and audio design. Freelance work with flexible hours, pay negotiable upon skill level.

    €20 / hr (Avg Bid)
    €20 / hr Keskimäär. tarjous
    31 tarjoukset

    Desarrollo de un navegador y visualizador de contenidos dinámico que se embeberá en una web Drupal. Contendrá entidades de imágenes y texto conectadas por nodos con jerarquía arbórea pero conectando algunos nodos entre sí en horizontal (ver adjuntos), de forma que pueda navegarse de form alibre en cualquier dirección. Los contenidos se cargan desde una basde de datos mysql. Las entidades constan de imagen y texto, o solo texto. Comportamiento de navegación requerido: Al hacer click en una entidad, las del mismo nivel se ocultan y ésta se centra en pantalla, desplegando sus hijas. Cada entidad debe incluir un enlace al contenido ampliado, que está en una ficha indivisual en la web. Adjunto ejemplos.

    €635 (Avg Bid)
    €635 Keskimäär. tarjous
    4 tarjoukset

    We need to take Alibre files, do a little clean up and successfully export them to .stl files to get estimates on manufacturing and 3d printing costs.

    €57 (Avg Bid)
    €57 Keskimäär. tarjous
    1 tarjoukset

    ...minimal design effort on the part of the user. The 3D model is that of a human leg from the knee down including the foot. A drawing with the key dimensions that need to be changeable will be provided. The shape may require some non-spreadsheet based dimensions to be mathematically linked ie to maintain certain ratios. In addition to basic height and width dimensions, the design structure must be such that the "leg" part can be rotated about its axis and the foot can be rotated about its axis. The spreadsheet programming of this feature is preferred but not essential as it is just some maths, however the model must be set-up so that this is possible. The model maybe created in any package but must be delivered in a fully compatible form with either Rhino ...

    €244 (Avg Bid)
    €244 Keskimäär. tarjous
    8 tarjoukset

    I am looking to have a model created for manufacturing. I have concepts, sketches, and existing samples that I would like to combine and have a Solidworks model created of a pair of sunglasses. A mix of industrial design and design for manufacturing. I have experience in the design engineering field using Catia V5r20, Solidworks, and Pro-E but am currently working on my own projects and do not have access to any software besides Alibre Design and I'm having some problems. I am unable to create surfaces and it becomes quite difficult when trying to work on sunglasses, as you can imagine. Please let me know if this is something you would be capable of doing and what time frame we would be looking at. Saw you just accepted one and figured you might be ...

    €142 (Avg Bid)
    €142 Keskimäär. tarjous
    1 tarjoukset

    Develop a 3D model of this cabinet that is capable of being 3D printed. Model should be scale, but does not require any internal components. The 3D print will be completed at 1/8th scale. The model will need to be readable / importable into Alibre Design 2012 and printed on a BFB-Touch 3D printer or equivalent.

    €184 (Avg Bid)
    €184 Keskimäär. tarjous
    15 tarjoukset

    ...repair and design of Instrumentation sensors and systems. Please note that this is not a full time role, but as required by the company and work load. Thorough knowledge of Analogue circuits, battery power systems, Instrumentation equipment, Temperature, Humidity sensors, A-D converters and serial data communication protocol. Some embedded PC knowledge would be useful. Other skills and experience should include:- Serial Comms (RS232/422/485) • Data Logging, Temperature & Humidity Measurement (Thermistor, Thermocouple, Thermopile & Pt100), Switch Mode DC/DC Conversion, Motor Control, Motion Detection & Measurement, Low Power Design • Low Noise, High Accuracy Measurement using ADCs • Analogue & Digital PCB Design (Prote...

    €527 (Avg Bid)
    €527 Keskimäär. tarjous
    26 tarjoukset

    We were looking for an experienced CAD operator: 1. with 3D software that is commonly accepted by engineers and which would generate or export files that can be imported into Alibre Professional (a) and which can import files from Solidworks (b) 2. with libraries of Class 125 CI and Class 150 DI flanged fittings and MI threaded fittings for the current project, (c) 3. with PVC/CPVC libraries for other projects. 4. Someone with the ability to handle layout/design would be desirable (d) 5. Someone that can handle some engineering responsibilities would be desirable (e) (a) HydroTec currently has Alibre Professional and would like to do some light work on the drawings, (generate views for technical data sheets and literature). (b) Our pressure vessel vendor...

    €502 (Avg Bid)
    €502 Keskimäär. tarjous
    7 tarjoukset

    Freelance design help wanted for a hybrid drive system. It is the normal gearbox design technology ( planetary gears, splines etc) a full CONCEPT already exists and this is the detail part design. You would be expected to design individual parts, including typical geometry, tolereancing and manufacturing drawings as part of a design team. The whole design will be integrated internally. The system must be on cad, preferably solidworks but any system that can export step files will be OK.. pro e, alibre, inventor. The basic system description would be similar to a "transfer case" type design, meaning a set of spur gears and a planetary stage. The shaft, splines gear design should be done on a recognized system such as k...

    €2184 (Avg Bid)
    €2184 Keskimäär. tarjous
    2 tarjoukset
    Plastic Mold Design Loppunut left

    This is not a programming project only design. This project is for the services of an experienced Industrial Designer, need to design two Consumer Electronic Products . Must have strong Alibre Design or Solid works or Pro-E / 3D realism skills and an artistic ideas that can create an eye catching design. This design will be used to make the mold for plastics, and is dimension critical. One of them is a desk top device, the other is a hand held mobile device. I am already using a modified of the shelf boxes, they give the functionality but not the look that consumer expects. If we will be happy with the work, there is more to come. ****If you can not work with my stated terms don’t bid and waist each others time.**** 1.I will pay when e...

    €136 (Avg Bid)
    €136 Keskimäär. tarjous
    9 tarjoukset

    Hello I need someone who can convert a .jpg, .gif, etc to a .dxf or .dwg file for AutoCad. The .dxf files will be used for lasercutting & the .dwg files will be used for milling. I need someone who is experienced in this type of work so that it goes smoothly without a bunch of revisions. This will be ongoing work so if I find someone who can do the work properly I'll...in this bid request. 3) All deliverables will be considered "work made for hire" under U.S. Copyright law. Buyer will receive exclusive and complete copyrights to all work purchased. (No GPL, GNU, 3rd party components, etc. unless all copyright ramifications are explained AND AGREED TO by the buyer on the site per the coder's Seller Legal Agreement). ## Platform AutoCAD for DXF files & Al...

    €81 (Avg Bid)
    €81 Keskimäär. tarjous
    1 tarjoukset

    I have an Alibre file (3D cad) an engineer did, that I need rendered, and rotated on its axis once - then imported to flash. I will loop the rotation, hence me needing only one complete revolution. the file is a . sat format, and i have no ability to convert it otherwise. Have tons of work, so take this into account when bidding. I can send the file if you need to look at it (its roughly 5MB). just let me know where to send (cant attched here, 1MB max limit)

    €38 (Avg Bid)
    €38 Keskimäär. tarjous
    1 tarjoukset