Suodata

Viimeisimmät hakuni
Suodatusperuste:
Budjetti
asti
asti
asti
Taidot
Kielet
    Työn tila
    6,902 SURFACE DESIGN työtä löytyi, hinnoittelu EUR
    Project for fizzl Loppunut left

    Moi Fizzl! mulla olis pieni projekti. Tarvitsisin ohjelman mika pystyy lukemaan +1gb Geotiff ilmavalokuvia ja Digital Surface Model. Eli WGS84 koordinaatti systeemi missa voidaan suorittaa etaisyyslaskentaa koordinaattien valilla. Ymmartaakseni WGS84 koodi loytyy javan kirjastoista. Ota yhteytta jos sinulla on kiinnostusta ja tietotaitoa taman projektin

    €9 - €9
    €9 - €9
    0 tarjoukset

    ...realistically wrap around the product to specific, but uniform locations, on the product (top and/or lower sections). 4. Cylinders will also need to effect 3 independent surface color changes (body, cap and spout) using swatch like buttons. Preferably this should be done using code, as opposed to using CSS to swap images. 5. End-user will need to be

    €1947 (Avg Bid)
    €1947 Keskim\u00e4\u00e4r. tarjous
    16 tarjoukset

    ...attached to this main member. The assembly drawings provided locations of all parts, locations of holes (as the XY hole location is more important than the end of the fitting), surface treatment required, etc. Please confirm you can start work right away and provide a lump sum number of hours and your hourly rate. Ongoing work available for the right candidate

    €15 / hr (Avg Bid)
    €15 / hr Keskim\u00e4\u00e4r. tarjous
    2 tarjoukset

    ...attached to this main member. The assembly drawings provided locations of all parts, locations of holes (as the XY hole location is more important than the end of the fitting), surface treatment required, etc. Please confirm you can start work right away and provide a lump sum number of hours and your hourly rate. Ongoing work available for the right candidate

    €14 / hr (Avg Bid)
    €14 / hr Keskim\u00e4\u00e4r. tarjous
    5 tarjoukset
    NX 4 Axis Milling 5 päivää left

    Hi, I have part to CAM setup for 4 Axis milling. Machine movements are X,Y,Z & A index rotation. Part is with cylindrical shape with cylindrical top surface has some pattern to machine. I want cam setup file so I can generate the NC code with post-processor. If you are good at in NX multi axis milling please contact me I will share more details.

    €93 (Avg Bid)
    €93 Keskim\u00e4\u00e4r. tarjous
    8 tarjoukset
    Trophy icon Our product needs a name! 5 päivää left

    ...Nano Ceramic coatings for the automotive market. What is a nano ceramic coating? A nano ceramic coating is a 3D layer, a invisible shield on the car, which helps that the car surface looks every day like a completely new car. It protects the car complete from weather, chemicals and so on. Our product is ready for the market. But we need a name for the

    €20 (Avg Bid)
    €20 Keskim\u00e4\u00e4r. tarjous
    12 työtä

    ...une palette. Les portes du bâtiment donnent sur l’allée centrale. Il y a 4 réservoirs de 275 gallons, deux sur le sol et deux empilés. Les panneaux solaires couvent toute la surface du tout du bâtiment (même si ce n’est pas la vraie dimension des panneaux solaires) Les raised bed, et la shed doivent être créés. Les p...

    €275 (Avg Bid)
    €275 Keskim\u00e4\u00e4r. tarjous
    8 tarjoukset
    Materials science project 4 päivää left
    VARMENNETTU

    Report on Laser Surface of a specific metal. APA style.

    €274 (Avg Bid)
    €274 Keskim\u00e4\u00e4r. tarjous
    45 tarjoukset
    Trophy icon Atlanta's Home Town Ceramic Coating 1 päivä left

    ...USE our font (Zona Pro or Zona Pro Bold) or entries cannot be used 5. Include the verbiage: "A city like Atlanta deserves only the best" Gtechniq Logo (remove smart surface science from logo file if possible) "Atlanta's Home Town Ceramic Coating" ...and.... Now that the leading global manufacturer of ceramic coatings and maintenance products

    €213 (Avg Bid)
    Taattu Sinetöity
    €213 Keskim\u00e4\u00e4r. tarjous
    24 työtä

    I need help to prepare models in Inventor (surface modeling) from STEP-files with smaller modifications and also some additional parts to these files where the base will be made from sketches. Depending on how much you can assist me you might take some of my modeling too and I will mainly work on the final assembly. This project now is limited in time

    €9 / hr (Avg Bid)
    €9 / hr Keskim\u00e4\u00e4r. tarjous
    45 tarjoukset

    ...une palette. Les portes du bâtiment donnent sur l’allée centrale. Il y a 4 réservoirs de 275 gallons, deux sur le sol et deux empilés. Les panneaux solaires couvent toute la surface du tout du bâtiment (même si ce n’est pas la vraie dimension des panneaux solaires) Les raised bed, et la shed doivent être créés. Les p...

    €189 (Avg Bid)
    €189 Keskim\u00e4\u00e4r. tarjous
    6 tarjoukset
    Cairo gl in webkit 2 päivää left

    ...eglCreateWindowSurface and utilized as two cairo egl surface for front surface and another for back surface. But we can draw only in united region only. So please suggest us whether any texture concept need to implement. Note: FYI, We have checked the gltexImage2D but we cant take the surface data for gltexImage2D. Thanks, And for this answer

    €11 (Avg Bid)
    €11 Keskim\u00e4\u00e4r. tarjous
    1 tarjoukset

    -This program needs to be made downloadable on my Windows 8 Windows Surface Pro 4 - Uses the webcam to scan/read both Barcodes and QR codes and import them into a pre-existing file in Microsoft excel - Saves each session by time and date stamps in a text file as a back up

    €64 (Avg Bid)
    €64 Keskim\u00e4\u00e4r. tarjous
    2 tarjoukset

    Looking for 3D modeler(s) for modification of existing 3D models with texture. We are scanning real objec...need to make some adjustment to make them realistic looking. Typically add material in OBJ for glossy surfaces. In this project, we need to adjust 2 shoe models. Add glosy surface, modify existing texture Objects are used in AR, Web, e-shop

    €39 (Avg Bid)
    €39 Keskim\u00e4\u00e4r. tarjous
    9 tarjoukset

    ...agent, recording the calls between agent and customer and agent and another agent. ability to combine recordings in one ticket. Must 13 Caller ID and history Automatically surface customer details, including full interaction history from previous calls. Must 14 conditional routing multi conditions routing the calls by day / time / group of agents / available

    €1225 (Avg Bid)
    €1225 Keskim\u00e4\u00e4r. tarjous
    16 tarjoukset

    Need a freelance architect to do a complete landscape design of a Hill Side Project in India - Approx 5000 square metre of steep hill land. Need you to design the concept as per the contour survey report of the land. Retaining walls, Green areas, parking, structures, pathways, lighting, basic plumbing and drainage layout, boundary wall, cut & fill details

    €320 (Avg Bid)
    €320 Keskim\u00e4\u00e4r. tarjous
    18 tarjoukset

    ...of the product sample, for you to recreate the material surface and colouring. As well as a vector logo of the brand "Sportstech" that needs to be placed on the treadmill(see photos). Aside from the control-panel that you need to recreate accoring to the photos, and the running surface pattern, there is no modeling involved. Also we want you

    €200 (Avg Bid)
    Mainostettu
    €200 Keskim\u00e4\u00e4r. tarjous
    6 työtä

    ...attached to this main member. The assembly drawings provided locations of all parts, locations of holes (as the XY hole location is more important than the end of the fitting), surface treatment required, etc. Please confirm you can start work right away and provide a lump sum number of hours and your hourly rate. Ongoing work available for the right candidate

    €9 / hr (Avg Bid)
    €9 / hr Keskim\u00e4\u00e4r. tarjous
    17 tarjoukset

    I need someone good at editing wi...how the roots need to be more or less. The file I have now is in a .SAT format. A plus would be if you can also change the SAT file to one that doesn't have a triangulated surface as this would make my work much easier later on. The whole tooth (part I have + the added roots) would be around 2 cm in total in height.

    €143 (Avg Bid)
    €143 Keskim\u00e4\u00e4r. tarjous
    25 tarjoukset

    We need our Lightwave 3D models setup with UV maps correctly so that we can very quickly change the images that are rendered on the surface. Our company prints images on canvas that is stretched and mounted on frames. Our 3D models need to have the images wrap around the sides of the object the same way our actual products look. I have very little

    €104 (Avg Bid)
    €104 Keskim\u00e4\u00e4r. tarjous
    19 tarjoukset
    Write some Articles Loppunut left

    We publish journal articles about surface modification with low-temperature plasma.

    €29 (Avg Bid)
    €29 Keskim\u00e4\u00e4r. tarjous
    12 tarjoukset

    I am looking to create an infographic of an underground and surface mining operation.

    €341 (Avg Bid)
    €341 Keskim\u00e4\u00e4r. tarjous
    43 tarjoukset

    I have would like a 3d model made based on a surface 3d model and sketches explaining my requirement. Experienced freelancer with prior experience working based on hand sketches and design for 3d printing/injection molding/diecasting would be preferable. further details will be shared for chosen freelancer.

    €173 (Avg Bid)
    Salassapitosopimus
    €173 Keskim\u00e4\u00e4r. tarjous
    25 tarjoukset

    Hello, I designed a screwdriver gripper that needs to be mold. I need someone to make mold of the part I draw. It is a screwdriver gripper with curved surface and holes on the surface.

    €9 / hr (Avg Bid)
    €9 / hr Keskim\u00e4\u00e4r. tarjous
    42 tarjoukset
    Trophy icon George + Lance Loppunut left

    A start-up brand called "George + Lance" - c...any thinner than 0.3mm when at that scale or the brand will not emboss correctly into the leather, the thinness of the line will merely cut through the grain and damage the surface. Here is some inspiration for the style of logo graphics I like below. Questions are requests for further details welcomed.

    €213 (Avg Bid)
    Mainostettu Taattu
    €213 Keskim\u00e4\u00e4r. tarjous
    131 työtä
    mechanical design Loppunut left

    mechanical design part modelling, assembly, surface design job

    €3 / hr (Avg Bid)
    €3 / hr Keskim\u00e4\u00e4r. tarjous
    41 tarjoukset

    Need an experienced trainer for handling training on Digitised shape editor, Free style,Quick surface reconstruction in CATIA V5 for a reputed Automotive major group. Location is Hosur. The budget mentioned above is only tentative and it is negotiable based on experience and skill sets. Requirement: Immediate Candidates located near bangalore preferred

    €535 (Avg Bid)
    €535 Keskim\u00e4\u00e4r. tarjous
    6 tarjoukset

    ...50014380165F2BB0 Bus Interface PCI Hardware Revision C Firmware Version 5.14 RAID 6 (ADG) Status Disabled Rebuild Priority High Transformation Priority Medium Surface Scan Analysis Priority Idle Surface Scan Delay 15 sec RAID 6/60 Alternate Inconsistency Repair Policy Disabled RAID 5/6/50/60 Degraded Mode Performance Optimization Disabled Physical Drive

    €138 (Avg Bid)
    €138 Keskim\u00e4\u00e4r. tarjous
    9 tarjoukset

    ...-web-823379988 Requirement: - Compatible 3Dsmax 2016 - System unit; 1 unit = 1 cm - Quad poly Modeling (clean one, no Boolean, no tri poly, no double vertex, no overlap surface...) - Keep the smoothing mod on top of the tree - do not stack the tree - UVW with checker render to make sure the UV are correct - Wireframe screenshot to make sure the modeling

    €189 (Avg Bid)
    €189 Keskim\u00e4\u00e4r. tarjous
    40 tarjoukset

    We need very creative writer to proof read some marketing letters (Introductory & Marketing Letter - surface mail and email) we have. We will need the letters critic and possibly re-written to be more suitable for the target audience and make optimum impact and impression. Feel to change captions, styles or provide advice on the best format, etc.

    €96 (Avg Bid)
    €96 Keskim\u00e4\u00e4r. tarjous
    32 tarjoukset
    Project for Aya A. Loppunut left

    Hi Aya A., I have simulated a project in Abacus based on a journal paper and I would like to verify my work w...result. I could not manage to reach the paper result for some reasons. I believe I made a mistake in defining load step. the project is an impact load (free fall) on a metal surface . Please do not hesitate if you need further information .

    €25 (Avg Bid)
    €25 Keskim\u00e4\u00e4r. tarjous
    3 tarjoukset

    ...materials. Only experienced architectural modelling specialists should apply. The task includes: + create a 3D CAD model from 2D drawings + add furnishings, plants and surface textures (modern contemporary style - refer to style guide), + add lighting and shadows. + produce 7 high-quality rendered views of the property The 2D plans are attached

    €348 (Avg Bid)
    €348 Keskim\u00e4\u00e4r. tarjous
    112 tarjoukset
    Logo Design Loppunut left

    I need a logo designed for a mine maintenance company called SUMMS Tag line: Surface & Underground Mining Maintenance Services Pty Ltd I'd like the design to be modern & masculine. A chrome style logo like the attached picture on a dark blue background. I'd like the logo to have some reference to the mining industry. For example a cog or conveyor

    €74 (Avg Bid)
    €74 Keskim\u00e4\u00e4r. tarjous
    112 tarjoukset

    Remotely operated vehicles (ROVs) are a safe and widely used type of underwater vehicle serving a range of military, commercial, and scientific needs. Using a series of pr...a range of military, commercial, and scientific needs. Using a series of propellors, ROVs are unoccupied, highly maneuverable underwater robots operated by a person on the surface

    €430 (Avg Bid)
    €430 Keskim\u00e4\u00e4r. tarjous
    21 tarjoukset

    I ha...'Part 1 - BASE MODEL & 'Part 2 - ANATOMICAL MODEL & 'Part 3 book dimensions - involves extending the base model and creating an negative indentation on the newly extended surface for a book to fit into. The model will then require a negative to be created of the front facing side of the anatomical model and a similar indentation for the book.

    €143 (Avg Bid)
    €143 Keskim\u00e4\u00e4r. tarjous
    55 tarjoukset

    ...have variable relative locations in space. - The source coil may be below the surface, while the sensor coil may be above the surface (there should be no restriction on the placement of the source or sensor in space). Programs that only allow for coils on the ground surface will not be suitable. - It should be possible to calculate with both horizontal

    €472 (Avg Bid)
    €472 Keskim\u00e4\u00e4r. tarjous
    1 tarjoukset

    Hi, I have just launched a really cool Tablet holder called the padmag and i'm wanting a really co...Rubberised flexible steel gooseneck (45cm) for precision positioning. + 27cm screw-in gooseneck extension for added height. Strong, non-scratch magnet to stick to any metal surface. Heavy – weight steel base to transform into a tablet stand.

    €11 (Avg Bid)
    Taattu
    €11 Keskim\u00e4\u00e4r. tarjous
    31 työtä

    I have about 50+ smartphones on Android (Samsung Gal...(Samsung Galaxy S8 / S8 + / Note 8). I an idea and implementation how to use to earn in passive mode. Bitcoins mining and sales are not interesting. One of the ideas "on the surface" - viewing paid advertising, video or installing applications in automatical mode. Details of payment are discussed.

    €496 (Avg Bid)
    €496 Keskim\u00e4\u00e4r. tarjous
    15 tarjoukset

    I have about 50+ smartphones on Android (Samsung Gal...(Samsung Galaxy S8 / S8 + / Note 8). I an idea and implementation how to use to earn in passive mode. Bitcoins mining and sales are not interesting. One of the ideas "on the surface" - viewing paid advertising, video or installing applications in automatical mode. Details of payment are discussed.

    €457 (Avg Bid)
    €457 Keskim\u00e4\u00e4r. tarjous
    3 tarjoukset

    ...should be able detect plane/surface like shown in this video [kirjaudu nähdäksesi URL:n] and/or draw an area for undetectable plane/surface like shown in this video [kirjaudu nähdäksesi URL:n] 2. Once the plane is detected user should be able to apply texture/tiles to the wall/floor surface. 3. We want physically based

    €2654 (Avg Bid)
    €2654 Keskim\u00e4\u00e4r. tarjous
    17 tarjoukset

    Required an expert modeller with Part, Assembly, Surface, Sheet metal and Drawings.

    €131 (Avg Bid)
    €131 Keskim\u00e4\u00e4r. tarjous
    24 tarjoukset

    Required an expert modeller with Part, Assembly, Surface, Sheet metal and Drawings.

    €847 (Avg Bid)
    €847 Keskim\u00e4\u00e4r. tarjous
    22 tarjoukset

    I have about 50+ smartphones on Android (Samsung Gal...(Samsung Galaxy S8 / S8 + / Note 8). I an idea and implementation how to use to earn in passive mode. Bitcoins mining and sales are not interesting. One of the ideas "on the surface" - viewing paid advertising, video or installing applications in automatical mode. Details of payment are discussed.

    €482 (Avg Bid)
    €482 Keskim\u00e4\u00e4r. tarjous
    11 tarjoukset

    ...silver/grey windows... and black rotors/skids. All of the graphics in white will be added to the 3D print... raised 1mm off the surface.... see photos Also the yellow/green logo and blue logo will be added and raised 1mm from the surface....see photos. The helicopter also needs to be made hollow in the middle to reduce printing costs. The final print of

    €118 (Avg Bid)
    €118 Keskim\u00e4\u00e4r. tarjous
    31 tarjoukset

    ...compatible with ARKit 1.5 2) added to an empty XCode project with a single ARKit-based view controller 3) added to a simple ARSCNView so that they are displayed as intended on a surface (e.g., table) visible through the phone's camera 4) flame subtly animated if possible The deliverable must be a working XCode project. It can be in Swift or Objective-C, but

    €222 (Avg Bid)
    €222 Keskim\u00e4\u00e4r. tarjous
    5 tarjoukset
    Design project Loppunut left

    ...just like superman's with the words " I AM" written with light, just beneath the surface of the water facing superman not too bright, but noticeable because it's the name of the mixtape title. So basically it'll be upside down under water a foot or so from the surface, written with white light, and right side up when the being is looking at it. The

    €835 (Avg Bid)
    €835 Keskim\u00e4\u00e4r. tarjous
    43 tarjoukset

    ...stand coupled with non-slip handle can rotate 180 degrees. When placed on the floor surface, the lamp forms a “V” shape, providing additional stability by design. Strong Magnetic Base--The magnetic base is strong enough to hold the lamp firmly on any metal surface to prevent accidental repositioning of spotlight, supporting hands-free operation. 360-Degree

    €21 (Avg Bid)
    €21 Keskim\u00e4\u00e4r. tarjous
    10 tarjoukset

    ...com/ Any Additional features will be help full and we need the Control Panel as well .... What app should do .. How it works: • Customer will Park his/her car in the surface lot at work • Customer will Pin his/her spot in the app while inside or beside thier car • Customer will Pop open his/her gas tank door • Customer will Request us Service

    €717 (Avg Bid)
    €717 Keskim\u00e4\u00e4r. tarjous
    27 tarjoukset