Field-Programmable Gate Array Experts Palkattavana

  • FPGA
Ehdotuksia:
lisää

Maat

Tietty sijainti

Kokeet

Tuntihinta (USD)

Arvosana

Online-tilassa

Näytetään 21 tulosta
  • Palkkaa     cesur135
Palkkaa     cesur135

    cesur135 cesur135

    Turkey $15 USD / tunti
    electrical and electronics engineer
    Turkey
    0.6
    2 arvostelua 2 arvostelua $15 USD / tunti
    I have worked on several projects in my working life. Especially in the area of industrial Automation ,I have worked on the Wastewater Treatment Plant and Water Treatment Plant Automation Project. I wrote the system software with the SIEMENS TIA Portal program and the Simatic Manager program according to the...
    I have worked on several projects in my working life. Especially in the area of industrial Automation ,I have worked on the Wastewater Treatment Plant and Water Treatment Plant Automation Project. I wrote the system software with the SIEMENS TIA Portal program and the Simatic Manager program according to the automation scenario and then I worked with the SIEMENS WinCC SCADA program to monitor and control the system. I used the SIEMENS PH & INFORMATION SERVER program to report the units on a monthly, monthly and yearly basis and prepared templates for the reports. I did (PTP) point to point tests and automation tests when the units were switched on. I drew the Electricity Projects with the E plan P8 V2.6 program. In the field of process automation, I used the DELTA PLC program and the ABB PLC program to control each piece of equipment in the factory. In Energy Automation, I also worked in HES projects where I made the generators PLC and SCADA system. Ventilation systems of plants and enterprises were made according to the temperature of the environment, according to the working information of the machines and according to other factors. Ventilation system entered the circuit and worked in a certain place. I usually used ABB AC500 PLC program and ABB & SIEMENS drivers when doing these systems. I install &Comission Chocolate Machines,lines.And test all equipment then commission about process follow. I used Honeywell DCS C200 in iron steel industry and I comissioned this systems about part by part units In the field of electricity, I work actively in the fields of electric panel works, electricity projects and field applications of small enterprises in general. I used OMRON PLC some factory application with given scenario I wrote plc to control each equipment and depend on sensor etc.. I set up on the field instruments, configuration upper and lower limit values during setup, setup analogue 4.20 mA, 0-10 V. I made work such as parameter setting of ABB & SIEMENS drivers and softstarters. In Machine Automation ,I have done projects like machine process Automation and writing software depositor and other part of machines and there I used AB PLC –RS Logix 5000 and Factory talk. vähemmän
  • Palkkaa cesur135
  • Palkkaa     vvaceem
Palkkaa     vvaceem

    vvaceem vvaceem

    Pakistan $30 USD / tunti
    Electronics & Control Engineer | PCB Designer
    Pakistan
    0.0
    0 arvostelua 0 arvostelua $30 USD / tunti
    Hi, I am an Electronics and Control Systems Engineer. I have been providing services related to Product Developing including: Schematics/PCB Designing, Microcontrollers Firmware Programming. Other than this I also provide Electronics Circuits Designing & Simulations using Proteus, Multisim, MATLAB/Simulink, and...
    Hi, I am an Electronics and Control Systems Engineer. I have been providing services related to Product Developing including: Schematics/PCB Designing, Microcontrollers Firmware Programming. Other than this I also provide Electronics Circuits Designing & Simulations using Proteus, Multisim, MATLAB/Simulink, and LabVIEW for my clients at different freelancing platforms since 2015. ---------------- PCB DESIGNING: Some of my PCB Designs for my clients are: 1). 1KW and 3KW BLDC Motor Drive 2). Power Supplies (5V, 3A) 12V, 3A) (24V, 15A) (120V, 7A) (120V, 15A) 3). 56V, 56A Rectifier 4). Smart Sprayer gun 5). Power Bank 6). Frequency Generator 7). LED Dimmer 8). RGB LEDs Flasher 9). Car Dashboard Camera, USB Webcam, Object Tracking Camera design ---------------- CIRCUITS SCHEMATICS AND SIMULATIONS: Some of my Proteus, Multisim and LabVIEW projects for my clients are: 1). Analog Multimeter 2). Digital Thermometer 3). PIC Buck-Boost Converter 4). Temperature Control System 5). Couple Tank Control System 6). Elevator Simulation in Proteus 7). Design and implementation of the classical controller (PID and LQR) in LabVIEW and tested on QNET rotary inverted pendulum 8). Design a dynamic filter to avoid the jitters in the accelerometer and gyroscope in LabVIEW 9). Developed a controller for induction machine on My Rio using space vector PWM technique in LabVIEW ---------------- MATLAB/SIMULINK PROJECTS: 1). SCARA Robot modeling 2). Speed and Current Controller of Induction Motor 3). BLDC Motor Modeling, Control Logic and Simulation 4). Power Supply Modeling and Simulation 5). Buck Converter Modeling and Simulation 6). Animation of 2-dimensional obstacle avoidance system for an autonomous car 7). Utilization of Cognitive Network using different fading Channels 8). Chemical Injection and Steam generation Modeling, Control Logic and Simulation ---------------- MICROCONTROLLERS FIRMWARE PROGRAMMING: - STM32f407 - ATTINY - Arduino Uno, Nano, Mega, Due, Lily - ESP32, ESP8266 - PIC 16F, 18F, 24F Client satisfaction has always been my first priority, as I believe a satisfied client comes back for another work. Looking forward to work with you. Thank you vähemmän
  • Palkkaa vvaceem
  • Palkkaa     slavaten
Palkkaa     slavaten

    slavaten slavaten

    Russian Federation $35 USD / tunti
    Embeded / Electronics developer
    Russian Federation
    0.0
    0 arvostelua 0 arvostelua $35 USD / tunti
    Experienced in: Embedded programming for ARM/AVR/PIC - Electronic schematic and PCB design. -Mobile apps for Android including writing drivers and realtime apps. - Strong mathematic and physics background.
    Experienced in: Embedded programming for ARM/AVR/PIC - Electronic schematic and PCB design. -Mobile apps for Android including writing drivers and realtime apps. - Strong mathematic and physics background. vähemmän
  • Palkkaa slavaten
  • Palkkaa     lettolucher
Palkkaa     lettolucher

    lettolucher lettolucher

    Russian Federation $33 USD / tunti
    Python Deep Learning
    Russian Federation
    0.0
    0 arvostelua 0 arvostelua $33 USD / tunti
    ☀️Thanks for your visiting my profile. I enjoy programming and running it. Programming is my favorite. I have good experience with Python programming. Especially I can help you work on Computer Vision Deep Learning. I can work for you full-time and long-term, as I am to work from now only at home. My skills...
    ☀️Thanks for your visiting my profile. I enjoy programming and running it. Programming is my favorite. I have good experience with Python programming. Especially I can help you work on Computer Vision Deep Learning. I can work for you full-time and long-term, as I am to work from now only at home. My skills for you are as follows: ✔ Python/Matlab Programming ✔ Image Processing using Python, OpenCV, Matlab and so on. ✔ Computer Vision, Speech processing, Natural Language Processing by Deep Learning using libraries such as TensorFlow, Keras, Pytorch and so on. ✔ Deployment of ML/DL models into Web app, Desktop app or Mobile app. ✔ Web Development using Python-Django/Flask/FastAPI, React/Vue or other frameworks. If you contact me, I will do my best for you. Thanks again for your kind visiting.☀️ vähemmän
  • Palkkaa lettolucher
  • Palkkaa     PCBDESIGNER38
Palkkaa     PCBDESIGNER38

    PCBDESIGNER38 PCBDESIGNER38

    Bangladesh $10 USD / tunti
    Embedded System Engineer||PCB Designer
    Bangladesh
    0.0
    0 arvostelua 0 arvostelua $10 USD / tunti
    Hello, I am an established, heavily experienced Embedded Systems Engineer with 4 years of experience in PCB Designs and Microcontroller Development. I love taking on any number of challenges in my field, welcoming new clients to test my skill set and professionalism. More than anything, I love showing a client what I...
    Hello, I am an established, heavily experienced Embedded Systems Engineer with 4 years of experience in PCB Designs and Microcontroller Development. I love taking on any number of challenges in my field, welcoming new clients to test my skill set and professionalism. More than anything, I love showing a client what I can do and seeing their face when I develop something better than they could have imagined. I’m skilled in a number of different services and skills, which include: 1. Schematic and PCB Design 2. Microcontroller PCB Board Design 3. Power Electronics (AC_DC, DC-DC, SMPS) 4. Embedded System 5. Circuit Design 6. IoT 7. Arduino 8.ESP 9. Microcontroller Programming 10. Analog & Digital Circuit Design 11. Product Design & Prototype All of these services come with constant quality assurance checks, proper documentation of all accompanying files, intense following of deadlines and budgets. Manufacturers can’t run on time if I’m not running on time. So, if my services are something you’d be interested in, I’m available via Freelancer and will answer you as soon as I can. Your business is important to me, so please message me with your projects or any questions you may have! Thank you! vähemmän
  • Palkkaa PCBDESIGNER38
  • Palkkaa     Lilywang70
Palkkaa     Lilywang70

    Lilywang70 Lilywang70

    China $38 USD / tunti
    Hardware & Firmware developer
    China
    0.0
    0 arvostelua 0 arvostelua $38 USD / tunti
    I am a full-stack developer and have much experience for working on Smart IOT device, Embedded and Control System Design and so on. - My Experiences: *PCB Design & Layout - Eagle Cad, KiCard, Altium, PADS, 2-6 Layer PCB *Electronics Design, Circuit Design, Schematic Design *Power Electronics *Wireless Technology...
    I am a full-stack developer and have much experience for working on Smart IOT device, Embedded and Control System Design and so on. - My Experiences: *PCB Design & Layout - Eagle Cad, KiCard, Altium, PADS, 2-6 Layer PCB *Electronics Design, Circuit Design, Schematic Design *Power Electronics *Wireless Technology *IoT *Micro Controller Hardware & Software *Embedded Systems Design and Solution *Atmel, Arduino, PIC 16F, PIC 18F, STM32Fxx *ESP32, ESP8266 *Raspberry PI *Bluetooth, GSM, WIFI, IR Remote, Transformer Design *Dot Matrix, RGB, LED Dimmer, Temperature & Humidity *Motor (DC, Servo, Stepper, BLDC ) Driver *Solar Battery Storage, ZigBee Communication, RF Technology, DC to DC Converter *Power Supply Design *OLED display, PWM, LCD Display *Prototype Design, Assembling, SMD Technology . CAD Drawing - AudoCAD, Solidworks, Inventor vähemmän
  • Palkkaa Lilywang70
  • Palkkaa     mjvbl
Palkkaa     mjvbl

    mjvbl mjvbl

    Hungary $30 USD / tunti
    Freelancer
    Hungary
    0.0
    0 arvostelua 0 arvostelua $30 USD / tunti
    Motivated hobbyists, checking out some projects here on Freelancer. TBD TBD TBD TBD TBD TBD TBD TBD
    Motivated hobbyists, checking out some projects here on Freelancer. TBD TBD TBD TBD TBD TBD TBD TBD vähemmän
  • Palkkaa mjvbl
  • Palkkaa     alexgurudewloper
Palkkaa     alexgurudewloper

    alexgurudewloper alexgurudewloper

    United Kingdom $30 USD / tunti
    Full-stack Web and Blockchain Developer
    United Kingdom
    0.0
    0 arvostelua 0 arvostelua $30 USD / tunti
    Hi. Thank you for visiting my profile. I am a senior web developer with over 8 years of experience in HTML, CSS, Javascript, PHP and Laravel and 5+ years in React, Next, Vue, Nuxt and Node.js. Also, I am proficient in blockchain stacks with smart contracts, solidity, and have experience deploying ERC-20, BEP-20 and...
    Hi. Thank you for visiting my profile. I am a senior web developer with over 8 years of experience in HTML, CSS, Javascript, PHP and Laravel and 5+ years in React, Next, Vue, Nuxt and Node.js. Also, I am proficient in blockchain stacks with smart contracts, solidity, and have experience deploying ERC-20, BEP-20 and NFT tokens. I have 3 years of experience in Web3.js and ethers.js to integrate blockchain net with frontend, Forking PancakeSwap and UniSwap. Skills -Frontend HTML, CSS, Javascript, Typescript , React.js, Next.js, Vue.js, Nuxt.js -Backend Node.js, Laravel, MySQL, GraphQL, Django -Blockchain Geth, Solidity, Smart Contract, Web3.js, Ethers.js -Embedded Software Microcontroller PIC/ATMEL PLC&SCADA good at several PLCs including Mitsubishi, Siemens vähemmän
  • Palkkaa alexgurudewloper
  • Palkkaa     evgeniyvc
Palkkaa     evgeniyvc

    evgeniyvc evgeniyvc

    Belarus $20 USD / tunti
    BlockChain&FullStack Developer, Mobile Apps
    Belarus
    0.0
    0 arvostelua 0 arvostelua $20 USD / tunti
    As a software engineer, I am an organized, collaborative and highly skilled full stack engine developer with 8+ years of professional experience in dynamic and deadline-driven work environments. - 8+ years of experience with engineering and full-stack development. - The goal is to provide client 100% satisfaction...
    As a software engineer, I am an organized, collaborative and highly skilled full stack engine developer with 8+ years of professional experience in dynamic and deadline-driven work environments. - 8+ years of experience with engineering and full-stack development. - The goal is to provide client 100% satisfaction with best result in a short time. - Self-motivated and self-taught professional who likes to solve difficult problem, creative & open-mind. My repertoire includes Blockchain, AI, Clouding engines and programming languages such as React.js+Redux/Next.js, Vue.js/Nuxt.js, PHP/Laravel, Node.js, Solidity, Python/Django/Flask, Ruby/Ruby on Rails, Shopify, CRM, Go/Golang. Highlights: ▮ Staking platform and NFT games ▮ CryptoCurrency Lending Platform ▮ Building application-specific blockchains using Cosmos SDK. ▮ Blockchain Ecosystem Insurance Service Platform ▮ Exchange and Trading platform for cryptocurrencies and ERC-20 tokens ▮ Accelerating investor engagement yield farming DApp ▮ Liquidity protocol that combines a collateralized stablecoin with liquidity pools ▮ Having deep knowledge of financial technology and deep understanding in blockchain banking platforms. ▮ High-performing Data Science and Machine Learning professional with extensive experience in BI/ Data-Science/Machine Learning Deep Learning life cycle management from conception to completion. ▮ Having deep understanding of algorithms and data structure i.e. all facets of supervised and unsupervised learning and data mining techniques to meet the analytics and AI needs. ▮ Deep Learning and Computer Vision, Big Data based high-performance based solutions and services. - Knowledge of financial technology. - Knowledge of blockchain smart contract using Solidity & Rust and integrating frontend and smart contract using web3.js. -Knowledge of NFT, DApp, Market platform, Staking platform, Swap platform. - Knowledge of image recognition and image generative using CNN and GAN. - Knowledge of speech recognition using RNN. - Experienced in building end-to-end pipelines for data manipulation, modelling, model deployment and optimizations. - Knowledge of variety of data visualization - Knowledge of variety of machine-learning algorithms: - Regression (Linear, Logistic Regression, Multiple, GLM) - Statistical Modelling (Cluster Analysis, Decision Trees, Regression) - Classification (Naive Bayes, Support Vector Machine, Decision trees, Ensembles - Random forests, Gradient Boosting) - Highly proficient in Python and R. - Experienced in end-to-end open source platform-tensorflow and open source framework Pytorch and Python library Theano. Full stack development - Front end : React.js, Vue.js, - Back end: Node.js, Django, Flask, Laravel, CI - Smart contract development: Solidity, Rust - Database: MySQL, MongoDB, PostgreSQL vähemmän
  • Palkkaa evgeniyvc
  • Palkkaa     zhuhaiclicky
Palkkaa     zhuhaiclicky

    zhuhaiclicky zhuhaiclicky

    China $25 USD / tunti
    Hardware and Firmware Engineer
    China
    0.0
    0 arvostelua 0 arvostelua $25 USD / tunti
    I am a hardware and firmware engineer and I've designed the electronica and electrical device and develop the MCU firmware. My skills includes - Arduino, STM32, PIC32, AVR, MSP430, Nuvoton, - WiFi, BLE: ESP32, ESP8266, NRF51, NRF52, NRF5340, NRF9160 - GSM/GPRS/GPS: SIM800/SIM900/SIM7000/SIM7600, Quectel, U-Blox -...
    I am a hardware and firmware engineer and I've designed the electronica and electrical device and develop the MCU firmware. My skills includes - Arduino, STM32, PIC32, AVR, MSP430, Nuvoton, - WiFi, BLE: ESP32, ESP8266, NRF51, NRF52, NRF5340, NRF9160 - GSM/GPRS/GPS: SIM800/SIM900/SIM7000/SIM7600, Quectel, U-Blox - LoRa(SX1276, SX1278, SX1302), Xbee, Z-Wave, - Raspberry Pi, Orange Pi(Allwinner chip), Odroid, Jetson Nano - C/C++, Python, embedded linux, FreeRTOS, Mongoose, ESP-IDF, Zephyr, Yocto, - SPI, I2C, CAN, one-wire, TCP/IP, UDP, Websocket, RS485, mqtt, Modbus, Eth/IP - Internet of Things - PCB Design, PCB Assemble, Altium Designer, EasyEDA, KiCad I have experience in developing the WiFi, BLE, LoRa, 4G/LTE, NB-IoT, GPS, GSM, Zigbee, Z-Wave controllers and sensor meters, medical device, RGB Led Matrix, Motor driver and Controllers. And also developed the embedded linux system and devices. For my clients, I develop the prototype and product in my factory. Based a lot of experience and skills, I can provide the best solution and products for you. You can contact me anytime and I will start working asap. Best regards. vähemmän
  • Palkkaa zhuhaiclicky

Hei , tässä joitain offlinessa olevia freelancereita

Hei , tässä joitain offlinessa olevia freelancereita, jotka täsmäävät hakusanaan ""