VW Bulli Camper VAN Sticker Design
- Tila: Closed
- Palkinto: €50
- Vastaanotetut työt: 5
- Voittaja: Maranovi
Kilpailun tehtävänanto
create a Sticker Design Camper Live/Jorney/roudrunner or something else special for the 1995 VW T4 FamiliyCamperVAN Bulli Carthago long version to print it by Flyeralarm
-right side with slide-door
-left side
-backside
https://www.flyeralarm.com/de/shop/configurator/index/id/8063/2d-autofolie-freiform.html
In english with google translated more information for the fileformatin. please do the job in the right way so i can upload it to the printing company flyeralarm.com
information
General information on layout programs
You need a layout program with which full-tone colors (special colors) can be created as a color mode (e.g. InDesign,
Illustrator, QuarkXPress, CorelDraw, etc.), Office programs and image editing programs are available for this product
Print data creation unsuitable!
Contour cut
Please create the contour cut in your layout in addition to your design.
Make sure that you create your design at least 4 mm around the cutting contour,
to avoid possible speed cameras (white borders).
Creation of the contour cut
Create the cutting contour on a separate layer as a solid color with 100% magenta.
Name the solid color “CutContour”.
The print file may contain a maximum of fifteen closed cutting contours. (see pictures)
The cutting contours must be set to the "Overprint ON" function.
Other requirements
Create the cutting contour with a line width of 1 point.
Only create closed paths.
Only PDF is possible as the file format.
The cutting contour must not fall off the edge (in the trim). (See Figure 2)
The safety distance between the cutting contour and the data format is 5 mm. (See Figure 3)
10 mm minimum distance between the cutting contours (see Figure 4)
The thinnest point should not be less than 5 mm. (See Figure 5)
The angle must not be less than 40 °. (See Figure 6)
In german original text:
Informationen
Allgemeiner Hinweis zu Layoutprogrammen
Sie benötigen ein Layoutprogramm, mit dem Volltonfarben (Sonderfarben) als Farbmodus angelegt werden können (z.B. InDesign,
Illustrator, QuarkXPress, CorelDraw, etc.), Office-Programme und Bildbearbeitungsprogramme sind bei diesem Produkt für die
Druckdatenerstellung ungeeignet!
Konturschnitt
Bitte legen Sie den Konturschnitt in Ihrem Layout zusätzlich zu Ihrer Gestaltung an.
Berücksichtigen Sie hierbei, Ihre Gestaltung mindestens 4 mm rund um die Schneidkontur anzulegen,
um eventuelle Blitzer (weiße Ränder) zu vermeiden.
Anlegen des Konturschnitts
Legen Sie die Schneidekontur auf einer seperaten Ebene als Volltonfarbe mit 100% Magenta an.
Benennen Sie die Volltonfarbe „CutContour“.
Die Druckdatei darf maximal fünfzehn geschlossene Schneidekonturen enthalten. (siehe Abbildungen)
Die Schneidekonturen müssen auf die Funktion „Überdrucken EIN“ eingestellt sein.
Sonstige Vorgaben
Legen Sie die Schneidkontur mit einer Linienstärke von 1 Punkt an.
Legen Sie ausschließlich geschlossene Pfade an.
Als Dateiformat ist nur ein PDF möglich.
Die Schneidekontur darf nicht randabfallend (im Beschnitt) angelegt sein. (Siehe Abbildung 2)
Der Sicherheitsabstand der Schneidekontur zum Datenformat beträgt 5 mm. (Siehe Abbildung 3)
10 mm Mindestabstand zwischen den Schneidekonturen (Siehe Abbildung 4)
Die dünnste Stelle sollte 5 mm nicht unterschreiten. (Siehe Abbildung 5)
Das Winkelmaß von 40°darf nicht unterschritten werden. (Siehe Abbildung 6)
Suositellut taidot
Työnantajan palaute
“@Maranovi won the contest on 3 June 2021”
InUli, Germany.
Kilpailun parhaat työt
-
Maranovi Spain
-
Dextart Egypt
-
Maranovi Spain
-
Maranovi Spain
-
guradesign0 Sri Lanka
Julkinen selvennystaulu
Kuinka päästä alkuun kilpailuiden kanssa
-
Ilmoita kilpailusi Nopeaa ja helppoa
-
Vastaanota tonnikaupalla osallistumisia Ympäri maailmaa
-
Myönnä palkinto parhaalle työlle Lataa tiedostot - Helppoa!