Design of Brick/Stone Entry Sign

  • Tila: Closed
  • Palkinto: $250
  • Vastaanotetut työt: 47
  • Voittaja: swapnilrocks98

Kilpailun tehtävänanto

I am looking for the design and 3D rendering of a brick/stone entry sign for our business. The monument entry sign will be located at the street entrance to our property, will include the name of the company and will need to encompass a 4' tall black wrought iron sliding gate with keypad (on post) across the approximate 20' driveway entrance. Design may include full structures on both sides of the driveway or full structure on one side and a pilaster on the other side. This will be where our clients enter our property.

Traffic will be entering the property from the left and turning left into the driveway, so the main structure will need to be on the right side of the driveway for the greatest visual effect.

A sliding gate is a gate that opens perpendicular to the driveway on rails. I have attached several examples. The monument will serve tow functions. First will be to display the company name and/or logo. The second will be to hide or mask the sliding gate frame when the gate is open.

Winner will be awarded based on a preferred concept that will probably require adjustment and fine tuning until complete. Winner should assume additional work will be required to selected design to reach completion.

Winner may be required to take the design and alternate brick vs. stone, make modifications to the proposed design, change design of company name, etc.

Final versions will need to have several 3D renderings from different perspectives, design placed to scale in AutoCAD on the building site plan and details provided in pdf and dwg files formats.

Examples for reference are attached along with property site plan and building elevation files. Please note the location of the entrance signs on the site plan on the northeast corner of the property. Design should complement the building elevation. The examples attached are for concept as they may be to large for the space we have available to work with. For instance, the Inverness example attached is merely for reference as to what a monument sign is and is significantly larger than our needs.

Smaller structure designs will be considered equally as construction cost is a factor in selection.

In most cases, the use of the logo should be as an add on to the name and be subtle, not pronounced.

Please note that newer files have been added as of 03/13/2014.

The name of the company for the sign is:

Abercrombie & Associates

We are an accounting company that does accounting work and tax returns for individuals and businesses. Our logo is posted as well in case someone wanted to add it to the design.

Suositellut taidot

Kilpailun parhaat työt

Näytä lisää töitä

Julkinen selvennystaulu

  • Ayman100
    Ayman100
    • 3 vuotta sitten

    when are you going to choose a winner?

    • 3 vuotta sitten
  • Ayman100
    Ayman100
    • 3 vuotta sitten

    please take a look at #55 before picking your winner

    • 3 vuotta sitten
  • bubblea
    bubblea
    • 3 vuotta sitten

    Please check @47

    • 3 vuotta sitten
  • richson
    richson
    • 3 vuotta sitten

    Excuse me, sir. Did you provide 3d model of the building? Different participants have the same model ...

    • 3 vuotta sitten
    1. rbacpa
      Kilpailun järjestäjä
      • 3 vuotta sitten

      I provided the architects dwg files and I assume they were able to use those to ad to their designs.

      • 3 vuotta sitten
  • bubblea
    bubblea
    • 3 vuotta sitten

    Please check @46

    • 3 vuotta sitten
  • bubblea
    bubblea
    • 3 vuotta sitten

    Please check @35.

    • 3 vuotta sitten
  • magicsoup
    magicsoup
    • 3 vuotta sitten

    Dear Sir, according to your new information, I modified the left side.(no fence) # 33 and 34. I also reduced the size. If you have more suggestion, especially about the left part, don't hesitate to tell me, please. Do you think it would better to put a log0 also on the left pole of my design? Looking forward to your feedback, thank you in advance.

    • 3 vuotta sitten
  • rbacpa
    Kilpailun järjestäjä
    • 3 vuotta sitten

    See image just added of a smaller structure example

    • 3 vuotta sitten
  • rbacpa
    Kilpailun järjestäjä
    • 3 vuotta sitten

    There will be no fence along the street to the left of the driveway beyond your design structure.

    • 3 vuotta sitten
  • rbacpa
    Kilpailun järjestäjä
    • 3 vuotta sitten

    Smaller structures should also be considered as construction cost will be a factor. Use of the logo should also be considered as an add on to the design as an alternative to the design where the logo is a pronounced feature. Smaller structural designs might prefer to use just the logo to better utilize a smaller space.

    • 3 vuotta sitten
  • rky3008
    rky3008
    • 3 vuotta sitten

    please check #31

    • 3 vuotta sitten
  • Ayman100
    Ayman100
    • 3 vuotta sitten

    please check #28

    • 3 vuotta sitten
  • SaiSengMain
    SaiSengMain
    • 3 vuotta sitten

    Hello Sir, I have submit entry #23 for your entry sign design. Please review and let me know if you need some changes.

    • 3 vuotta sitten
  • marcobossetti
    marcobossetti
    • 3 vuotta sitten

    Please feedback number #18

    • 3 vuotta sitten
  • rbacpa
    Kilpailun järjestäjä
    • 3 vuotta sitten

    In order to help with design, we are lowering the height of the sliding gate to 4' in order to make it easier to design around.

    • 3 vuotta sitten
  • rbacpa
    Kilpailun järjestäjä
    • 3 vuotta sitten

    Up to now, only entries 7,8 and 9 have encompassed the required sliding gate in their designs. Keep in mind that the design does not have to be symmetrical on both sides of the driveway, but the main structure, if not symmetrical on both sides, will need to be on the right side of the driveway.

    • 3 vuotta sitten
  • imranlajos
    imranlajos
    • 3 vuotta sitten

    bro pls seal it.....

    • 3 vuotta sitten
    1. rbacpa
      Kilpailun järjestäjä
      • 3 vuotta sitten

      Hi, tell me why I should seal it from your perspective. I am open to considering it. My thoughts were by having it open, I could direct designers in the right direction. For instance, as of now, only entries 7, 8 and 9 have followed the instructions and produced a design that is currently useable. By referencing those as examples, I can direct designers to what they need to be producing.

      • 3 vuotta sitten
  • rbacpa
    Kilpailun järjestäjä
    • 3 vuotta sitten

    Traffic will be entering the property from the left and turning left into the driveway, so the main structure will need to be on the right side of the driveway for the greatest visual effect.

    • 3 vuotta sitten
  • ArqJM
    ArqJM
    • 3 vuotta sitten

    Please check and feedback #8

    • 3 vuotta sitten
  • marcobossetti
    marcobossetti
    • 3 vuotta sitten

    I will start your design soon,

    • 3 vuotta sitten
  • sarhad
    sarhad
    • 3 vuotta sitten

    hi, i am interested on your contest, soon i wish to submit my entry

    • 3 vuotta sitten
    1. rbacpa
      Kilpailun järjestäjä
      • 3 vuotta sitten

      New examples posted for reference.

      • 3 vuotta sitten
  • SnbDB2014
    SnbDB2014
    • 3 vuotta sitten

    Here is Sanjay,..i m ready for ur contest,...will submit a design soon.

    • 3 vuotta sitten
    1. rbacpa
      Kilpailun järjestäjä
      • 3 vuotta sitten

      New examples posted for reference.

      • 3 vuotta sitten
  • swapnilrocks98
    swapnilrocks98
    • 3 vuotta sitten

    Hello Sir, how are you doing? I hope the provided Inverness is not your requirement. Required sign must be different kind of design. I would like to present good quality output soon. Hope you will like. :) Good Day!

    • 3 vuotta sitten
    1. rbacpa
      Kilpailun järjestäjä
      • 3 vuotta sitten

      New examples posted for reference.

      • 3 vuotta sitten
  • bubblea
    bubblea
    • 3 vuotta sitten

    Could you please tell about the project budget signage and sliding doors, and landscape area.
    For use in the design to fit the budget.

    • 3 vuotta sitten
    1. rbacpa
      Kilpailun järjestäjä
      • 3 vuotta sitten

      The budget for the masonry monument sign is between $6,000 and $12,000, depending on whether there are two full structures on each side of the driveway or just one full structure and a partial on the other side. This does not include the cost of the sliding gate.

      • 3 vuotta sitten
  • bubblea
    bubblea
    • 3 vuotta sitten

    We work to sketch design signage only. But if it is made to work with the concept design to construction contracts by the landscape architect.

    • 3 vuotta sitten
  • mvmoris
    mvmoris
    • 3 vuotta sitten

    Please repost the .DWG file

    • 3 vuotta sitten
    1. rbacpa
      Kilpailun järjestäjä
      • 3 vuotta sitten

      I recently reposted the entire dwg zip file.

      • 3 vuotta sitten
    2. rbacpa
      Kilpailun järjestäjä
      • 3 vuotta sitten

      Reposted

      • 3 vuotta sitten
  • rbacpa
    Kilpailun järjestäjä
    • 3 vuotta sitten

    Inverness is too big, just an example of what a monument sign is

    • 3 vuotta sitten
  • rbacpa
    Kilpailun järjestäjä
    • 3 vuotta sitten

    I just added a zip file, but it is just the entire set of dwg files that include the site plan. Other than the pdf file already posted, I have no others to work with.

    • 3 vuotta sitten
  • rbacpa
    Kilpailun järjestäjä
    • 3 vuotta sitten

    Hi, The site plan attachments I posted are all I have as far as I know. I will go back and check.. On the rendering itself, it is nice but non-functional for what we need. It does not take into account the 6' tall sliding gate across the driveway. With each end of the sign lower than the middle, the height of the gate will not be hidden from view and would look out of place with the iron frame behind the sign protruding above the top of the monument.

    • 3 vuotta sitten
  • bubblea
    bubblea
    • 3 vuotta sitten

    We would like to files auto cad (A1-01-site-pln.dwg).provide the copy model site plan in to the model page.No model file xref.

    • 3 vuotta sitten

Näytä lisää kommentteja

Kuinka päästä alkuun kilpailuiden kanssa

  • Julkaise kilpailusi

    Julkaise kilpailusi Nopeaa ja helppoa

  • Vastaanota tonnikaupalla osallistumisia

    Vastaanota tonnikaupalla osallistumisia Ympäri maailmaa

  • Palkitse paras hakemus

    Palkitse paras hakemus Lataa tiedostot - helppoa!

Ilmoita kilpailu nyt tai liity tänään!