Design and production of a real prototype case

  • Tila: Closed
  • Palkinto: $390
  • Vastaanotetut työt: 7

Kilpailun tehtävänanto

Idea of an Alu-housing…
Montag, 4. Juli 2016


The company Hi-Tec-Support GmbH manufactures the Color Brick 2.0 and distributes these.
The Color Brick 2.0 is a spectroradiometer that matches very well with the measuring devices in the medium price range. It is intended to improve the marketing of the device with a new housing design. The device should not only be high quality, but also look like this.
It should not be too light to convey a high quality impression and to improve handling during the calibration.
In addition, the name of the device (Color Brick 2.0) and the front panel should look a bit fresher.
Since the geometry and the associated arrangement of the components inside the
unit represents the real innovation and the process gives very good results, a "Housing around housing" is the preferable solution.
The device has above a window, which is placed under the lamp to be measured. Then with the PC the measurement is started.
The color and the surface can have an influence on the measurement. The "case housing" should rather be a neutral color (gray, silver) and not reflect too much.

In order to start the measurement it has to be calibrated black, the spectrometer instrument will be laid down with the opening and the calibration is carried out in the dark, which is why the device in has to have 2 stable positions, one upside down one normal like in the flyer.
With the expected quantities of 200 per year, the housing cost is shall have a maximum of 25 CHF.

Our idea was to have something like a Huawai P8 housing just larger etc…

Suositellut taidot

Kilpailun parhaat työt

Näytä lisää töitä

Julkinen selvennystaulu

  • vollbrecht
    • 2 vuotta sitten

    Der Anhang ist leider nicht ausreichend für eine detailierte Konstruktion. Es wäre zumindest die PCB samt Anschlüssen erforderlich. Weiterhin ist mir nicht ganz klar, was geliefert werden soll. Nur ein Design, die exakte Konstruktion oder/und ein gedruckter Prototyp.

    • 2 vuotta sitten
  • marcellomessias
    • 2 vuotta sitten

    Hello Sr. Thank You for your Contest. I will wait for your post. Thank You !

    • 2 vuotta sitten
    1. fboth
      Kilpailun järjestäjä
      • 2 vuotta sitten

      Hi Sir, what do you expect from me?

      • 2 vuotta sitten

Kuinka päästä alkuun kilpailuiden kanssa

  • Ilmoita kilpailusi

    Ilmoita kilpailusi Nopeaa ja helppoa

  • Saat valtavasti töitä

    Vastaanota tonnikaupalla osallistumisia Ympäri maailmaa

  • Myönnä palkinto parhaalle työlle

    Myönnä palkinto parhaalle työlle Lataa tiedostot - Helppoa!

Ilmoita kilpailu nyt tai liity tänään!