Design a template label for optical cleaning fluid

  • Tila: Closed
  • Palkinto: $50
  • Vastaanotetut työt: 54
  • Voittaja: Win112370

Kilpailun tehtävänanto

Overview:
We are introducing a new cleaning product. Use your creativity to put together a label to add value to the product.

It will be used for 30ml drip, and 50ml spray bottles (black) and the box.
The colours are black (background), silver (textures/graphics) and red.
It must be striking and simple.

Further Direction:
It is a cleaning fluid which removes contaminants such as dust, smears, waterstains and smudges from surfaces. The textures (or similar - e.g. a fingerprint) of these should form the striking identity of this product (not all need to be used). These are located at : [login to view URL]
Creativity and skill in using these or similar textures is essential.
You must have the rights to use any additional fonts, graphics you use.

Front Face : Identify the product
Side faces: Key features / uses blurbs
Rear: Instructions, safety information, QR code + manufacturer

40x95mm
65mmx110mm

For the competition, choose ONE of the label sizes, keeping in mind that the larger size will hold exactly the same text and design, just redesigned/larger/shifted elements)

Fonts must be readable
Black background to create space when stuck on bottle

Essential text:
Fine Optics Cleaner
Strictly formulated according to Dr. Clay's original recipe

Dries streak free and spot free with minimal rubbing
Safe for optical coatings
Works every time

Directions: Clean only when nessesary according to the protocol and process described under 'fine optics cleaning system' at [login to view URL]

Keep away from children. Not be be taken internally. If accidentally swallowed, call the Poisons Information Center on 13 11 26

Manufactured by Astro Dog
According to Australian Standards
[login to view URL]
(small logo and/or QR code)

Caution: Do not confuse the product identity with the logo.

Contents 30ml

Suggestions:
Work through the faces sytematically in segments - front face, side, and back.
Test it on a black tube (rolled up cardboard) or bottle first.
Some sample designs / starter ideas are provided.

Suositellut taidot

Työnantajan palaute

“Win B had a good concept and quickly made any requested changes for a product labelling concept and had some creative ideas that set him apart from others. Great job!”

Profiilikuva marcelteaching, Australia.

Kilpailun parhaat työt

Näytä lisää töitä

Julkinen selvennystaulu

  • marcelteaching
    Kilpailun järjestäjä
    • 4 viikkoa sitten

    Two main designs are the stand ours currently, keep up the great work!

    • 4 viikkoa sitten
  • metaphor07
    metaphor07
    • 4 viikkoa sitten

    sir please check my new entry #58 #59

    • 4 viikkoa sitten
  • marcelteaching
    Kilpailun järjestäjä
    • 1 kuukausi sitten

    Hi All, the box size is 35x35x115 high.
    Instead of a fixed box design, we are using one box and putting a label on the box.
    So, the label for the box will be four faces of 35mm per segment.
    The ones at the side will be at the back of the box, one of the two front ones needs to be the main face.
    Font is incredibly important. I am making some more comments on font today.
    Thank you for all the entries so far.

    • 1 kuukausi sitten
    1. rhhridoy35
      rhhridoy35
      • 1 kuukausi sitten

      Check entry #53

      • 1 kuukausi sitten
  • marcelteaching
    Kilpailun järjestäjä
    • 1 kuukausi sitten

    Hi All, the box size is 35x35x115 high.
    Instead of a fixed box design, we are using one box and putting a label on the box.
    So, the label for the box will be four faces of 35mm per segment - it does not need to extend 115mm up.
    The ones at the side will be at the back of the box, one of the two front ones needs to be the main face.
    Font is incredibly important. I am making some more comments on font today.
    Thank you for all the entries so far.

    • 1 kuukausi sitten
    1. rhhridoy35
      rhhridoy35
      • 1 kuukausi sitten

      Check entry #53

      • 1 kuukausi sitten
  • marcelteaching
    Kilpailun järjestäjä
    • 1 kuukausi sitten

    In your design, think about what needs to be in the middle. It is the Center of the label. This is not a business card.
    Design the Center section first - then the left plate, then the right.
    Notice the three or four things it does in that blurb - make them bullet points?
    Read the description, notice it says fingerprints, smears, dust. These need to be cleverly integrated into your vision.

    • 1 kuukausi sitten
    1. yunitasarike1
      yunitasarike1
      • 1 kuukausi sitten

      Ok . I will make rervision Sir

      • 1 kuukausi sitten
    2. rhhridoy35
      rhhridoy35
      • 1 kuukausi sitten

      #52 Check please.

      • 1 kuukausi sitten
  • marcelteaching
    Kilpailun järjestäjä
    • 1 kuukausi sitten

    The label is going on a black bottle and must be black all the way around the edging.
    Your design will need to be scaled and put onto a slightly larger label also, so design it so this can easily be done.
    The label will need to be submitted in an AI file.

    • 1 kuukausi sitten
    1. rhhridoy35
      rhhridoy35
      • 1 kuukausi sitten

      #52 Check please.

      • 1 kuukausi sitten
  • marcelteaching
    Kilpailun järjestäjä
    • 1 kuukausi sitten

    Please experiment with different fonts for "Fine Optics Cleaner" - the font convey a factual and "reliable" feel.

    • 1 kuukausi sitten
    1. rhhridoy35
      rhhridoy35
      • 1 kuukausi sitten

      #52 Check please.

      • 1 kuukausi sitten
  • rhhridoy35
    rhhridoy35
    • 1 kuukausi sitten

    Dear Contest Holder, Please see my entry #52 by- #RownakHossain

    • 1 kuukausi sitten
  • mangesh1986
    mangesh1986
    • 1 kuukausi sitten

    #increaseprize #increaseprize

    • 1 kuukausi sitten
  • aleemnaeem
    aleemnaeem
    • 1 kuukausi sitten

    please have a look at #50 and share your valued comments

    • 1 kuukausi sitten
  • marcelteaching
    Kilpailun järjestäjä
    • 1 kuukausi sitten

    Poison information needs to be small. The manufacturer needs to be small.

    • 1 kuukausi sitten
  • marcelteaching
    Kilpailun järjestäjä
    • 1 kuukausi sitten

    Some general feedback: Consider using less red.
    Black and white with a little red can be very effective.
    The design should show a fingerprint, a smear and dust particles and be easily visible.

    • 1 kuukausi sitten
  • aleemnaeem
    aleemnaeem
    • 1 kuukausi sitten

    please check #20 if there is anything to change please tell

    • 1 kuukausi sitten

Näytä lisää kommentteja

Kuinka päästä alkuun kilpailuiden kanssa

  • Ilmoita kilpailusi

    Ilmoita kilpailusi Nopeaa ja helppoa

  • Saat valtavasti töitä

    Vastaanota tonnikaupalla osallistumisia Ympäri maailmaa

  • Myönnä palkinto parhaalle työlle

    Myönnä palkinto parhaalle työlle Lataa tiedostot - Helppoa!

Ilmoita kilpailu nyt tai liity tänään!