Design a Logo for Canadian Numismatic Rarities (CNR)

Tila: Closed
Palkinto: $400
Vastaanotetut työt: 94
Voittaja: Ferrignoadv

Winner

Kilpailun tehtävänanto

Hello,

We are looking for a logo for Canadian Numismatic Rarities (CNR), we are looking for:

- A globe covered in puzzle pieces with one missing, the remaining puzzle piece should be shown going into place
- The full name of the company and initials should be present in the design, the full name preferably going around the perimeter of the globe and initials in the middle
- The logo should include the tag line: Building Collections One Piece at a time

We are open to creative freedom and execution however this is the main concept we are trying to achieve, the are additional images to further display the our ideas.

Thanks for your interest and we look forward to seeing your designs.

Suositellut taidot

Winner

Ilmoita samanlainen kilpailu

Julkinen selvennystaulu

Kilpailun järjestäjä
- 9 vuotta sitten
Anything more like the "CNR" in Entry number 16?

In addition, which program is the image created in? Wanted to make sure that I can edit the image upon purchase - the image needs to be scalable as it will be on business cards/letter heads/invoices/website/posters
- 9 vuotta sitten
Katso 5 viestiä lisää
1. manuel0827
  - 9 vuotta sitten
  Illustrator conserves quality doe snot pixelate if reduce or enlarge to any size while photoshop does pixelate.
  - 9 vuotta sitten
2. kk58
  - 9 vuotta sitten
  correct
  - 9 vuotta sitten
addatween
- 9 vuotta sitten
Dear Sir, this contest has a winner already? you will also accept other proposals? thanks / merci
- 9 vuotta sitten
Kilpailun järjestäjä
- 9 vuotta sitten
Hi Ferrignoadv,

Can you please change the font type for all the wording in the logo with a few different options both serif and sans serif please.

thanks
- 9 vuotta sitten
1. Ferrignoadv
  - 9 vuotta sitten
  in #164 I put in tests of fonts
  - 9 vuotta sitten
Kilpailun järjestäjä
- 9 vuotta sitten
Hi Ferrignoadv,

Very close 3 more items which stand out.

Have a lower case "a" instead of "A" in "....One Piece At a Time"

Increase the size of the letter "C" in "Canadian Numistmatic Rarities"

Have the puzzle pieces which is heading toward the globe to have the same dark shading (like at the bottom of the piece) to be at the top of the piece. Thus the entire piece would have a uniform dark shading around the edges.
- 9 vuotta sitten
1. manuel0827
  - 9 vuotta sitten
  blah! blah! blah! Just pay Ferrignoadv is nice at is ....
  - 9 vuotta sitten
Kilpailun järjestäjä
- 9 vuotta sitten
Please no more entries from anyone other than Ferrignoadv
- 9 vuotta sitten
Näytä 1 viesti lisää
1. Ferrignoadv
  - 9 vuotta sitten
  #159
  best regards
  - 9 vuotta sitten
2. manuel0827
  - 9 vuotta sitten
  Whatever we can submit whatever we want you dont own this website pay 340 dll logo and leave!!!! Ferringnoadv congrats your logo is worth 340 dlls just a rarities.
  - 9 vuotta sitten
Kilpailun järjestäjä
- 9 vuotta sitten
Ferrignoadv,

Please note I am only considering your entry as the winner with a few minor touch ups. I do not want you to feel that I am asking your to put more time into this project and pick someone else.

I still do not like the shading on the puzzle piece which is moving toward the globe. Is it possible to cut and paste the piece to the left of the missing puzzle piece, enlarge/rotate it and put it where the current piece which is moving toward the globe?

Can you increase the font size of "Canadian Numismatic Rarities" and NOT the "LTD"

Can you have the "at a time" on the line below "Building Collections One Piece" and have them centred. In addition Capitalize the "a" in "at" and "t" in "time".

In addition, after you have been paid in full, can I get a workable file where I can edit fonts/sizes in photoshop?
- 9 vuotta sitten
JohnChristianJr
- 9 vuotta sitten
I will send You few different ideas! Just wait if You want to check them out. After about 15 hours maybe I will be ready. Your globe could even be recreated as a Paper globe or as an wooden globe! Which continent would You like most ? :)
- 9 vuotta sitten
JohnChristianJr
- 9 vuotta sitten
A lot of custom changes are possible, just pick and choose, no restrictions, no limit, just imagine and order!!! Do You want a Golden globe, Platinum globe, Crystal globe, even a 3d moving Logo as an extra version??? Whatever You choose it will be a great pleasure to me to visualize it!!! I just don't get it , You didn't even feedback my last comment. I mean that I do feel very bothered, I've got alot of job to do and it would be very nice from You if You do tell me, should I continue working on Your contest! I mean that I would like You, as a Contest Holder to feel completely free to comment the way You want to do it. Please comment directly! If You have already chosen a winner, then I will leave calmly, no fuss. Im still here due to one reason. It took me a lot of time to work on Your exquisite project, but I don't even know did You even notice my entries??? :) All the good luck! Regards! :)
- 9 vuotta sitten
JohnChristianJr
- 9 vuotta sitten
Hello, did You check??? #130, #131 , #132 , #133 , #134 . Would You feedback please!!!
Hello dear Contest Holder! I have few questions, some of which may sound ridiculous! Anyway, I would like to know precisely what you want:
1. Do you want exactly that font "Oranienbaum" or a font resembling it very well? "Oranienbaum" is a new wonderful font, so I will download it if that is exactly the font You want. Sorry for question 1, but I got to be perfect!
2. What material would You like to cover the globe: Gold, silver, bronze, platinum, etc.
3. The missing puzzle’s spot You want it to be black, as far as I got it. Yes, but does that mean that You allow it to be shadowed and realistic, not being only a black spot.
4. Do You want the globe to be visible from the inside through the missing puzzle’s spot.

Do you want a map on your globe anyway? You can choose a continent and an angle of globes position.
- 9 vuotta sitten
blacktee011
- 9 vuotta sitten
#152 what do you think?
- 9 vuotta sitten
Kilpailun järjestäjä
- 9 vuotta sitten
Ferrignoadv,

Few more corrections on # 129 and we have a winner;

Please reduce the size of the puzzle piece which is fitting into place.

Please change the colour of the puzzle piece which is fitting into place to match the puzzle pieces which are surrounding the missing puzzle pieces (currently it is an odd shading affect?

Most important; Please have the land masses of North America, South America, Green land to resemble the exact shading of South Africa in your submission #129

Please change the font to resemble "CNR" in submission # 98.(BUT NO SHADING UNDER THE LETTERS) Please change the size of "LTD" to be slightly smaller (1 or 2 font sizes smaller) than the remainder for the "Canadian Numismatic Rarities"
- 9 vuotta sitten
Katso 10 viestiä lisää
1. blacktee011
  - 9 vuotta sitten
  For your information the stock images when bought are raw and andhigh resolution so don't tell lies that it will not look good when enlarged,but you don't know that because you rip and use freebies all the time,btw I modified the original design about 60% so it became an original piece and anyway the employer didn't like it so I created one original myself,two actually,and finally I am better than you however.
  - 9 vuotta sitten
2. MSabor16
  - 9 vuotta sitten
  :) That WAS a typing mistake meant to be " I wish all the best to all", autocorrect on my phone changed it to "will" without me noticing.. Anyway, no need for you to lose your temper ;) and again best of luck to you and everyone in this contest. Peace out.
  - 9 vuotta sitten
blacktee011
- 9 vuotta sitten
Have a look at #152 Thank you
- 9 vuotta sitten
blacktee011
- 9 vuotta sitten
#148 A few days ago you sent me a message that you want a transparent type of globe.Here you go,I tried one more time.Please review.
- 9 vuotta sitten
1. blacktee011
  - 9 vuotta sitten
  I didn't remove the piece yet cause I don't know if you will like it.I saw just now that message about the transparent globe,sorry.Give me feedbak and if you like it I will remove the piece and make any changes.
  - 9 vuotta sitten
Ferrignoadv
- 9 vuotta sitten
I'm making changes, a question, I just have to change the font in my proposal (as in 98),? or do I have to insert CNR and also the tagline as in 98?

thanks
- 9 vuotta sitten
Kilpailun järjestäjä
- 9 vuotta sitten
Hi Blacktee011, You entries are incredible and far better than I could ever produce, it is simply not what I am currently after in my logo
- 9 vuotta sitten
Näytä 1 viesti lisää
1. blacktee011
  - 9 vuotta sitten
  Then I don't know what you want,I give up :(
  - 9 vuotta sitten
2. soulflash
  - 9 vuotta sitten
  #125 also
  - 9 vuotta sitten
manuel0827
- 9 vuotta sitten
#145 #77 #6 #75 #74 #73 #16 #10 #37 you like them?
- 9 vuotta sitten
blacktee011
- 9 vuotta sitten
ok see #144 little details still needed but I want your feedback so I know that I am on the right track
- 9 vuotta sitten
manuel0827
- 9 vuotta sitten
#143
- 9 vuotta sitten
manuel0827
- 9 vuotta sitten
Can you please check #142 and tell me what I need to make better?
- 9 vuotta sitten
manuel0827
- 9 vuotta sitten
#141
- 9 vuotta sitten
Kilpailun järjestäjä
- 9 vuotta sitten
Blacktee011, I will wait until then, Please have it look like #129
- 9 vuotta sitten
1. manuel0827
  - 9 vuotta sitten
  so now blacktee is you favorite all hard work is gone blacktee011 so I have made revisions and you dont give me feedback his work impresses you more than mine
  - 9 vuotta sitten
manuel0827
- 9 vuotta sitten
What is the difference to some who try to hard and some who have the talent? I was just thinking talent is seen at first glance....
#77 #76 #75 #74 #73 Feedback.
- 9 vuotta sitten
blacktee011
- 9 vuotta sitten
I will make all the changes you asked within 2 hours,it will be 100% like you want
- 9 vuotta sitten
MSabor16
- 9 vuotta sitten
#140
- 9 vuotta sitten
MSabor16
- 9 vuotta sitten
#137 , rating or comments would be very much appreciated.
- 9 vuotta sitten
1. MSabor16
  - 9 vuotta sitten
  Thanks for the quick response, Pls check #138
  - 9 vuotta sitten
2. MSabor16
  - 9 vuotta sitten
  & #139
  - 9 vuotta sitten
passion4creation
- 9 vuotta sitten
Sorry, but have You already chosen?
- 9 vuotta sitten
Näytä 1 viesti lisää
1. Kilpailun järjestäjä
  - 9 vuotta sitten
  Hi Passion4creation,
  
  Your entries are great but unfortunately not currently what I am after
  - 9 vuotta sitten
2. passion4creation
  - 9 vuotta sitten
  I'm not sure how I am so off the track, but thank You for the feedback anyway. I'd be glad to change the color and shading some more to get closer to Your idea, if You think that should do it...
  - 9 vuotta sitten
JohnChristianJr
- 9 vuotta sitten
Hello, #130, #131 , #132 , #133 , #134 .
Hello dear Contest Holder! I have few questions, some of which may sound ridiculous! Anyway, I would like to know precisely what you want:
1. Do you want exactly that font "Oranienbaum" or a font resembling it very well? "Oranienbaum" is a new wonderful font, so I will download it if that is exactly the font You want. Sorry for question 1, but I got to be perfect!
2. What material would You like to cover the globe: Gold, silver, bronze, platinum, etc.
3. The missing puzzle’s spot You want it to be black, as far as I got it. Yes, but does that mean that You allow it to be shadowed and realistic, not being only a black spot.
4. Do You want the globe to be visible from the inside through the missing puzzle’s spot.

Do you want a map on your globe anyway? You can choose a continent and an angle of globes position. Do you want 1mm spacing between the puzzles or would You like no spacing at all, I mean do You want a thick structured globe.
- 9 vuotta sitten
Ferrignoadv
- 9 vuotta sitten
#126 #127
- 9 vuotta sitten
1. Ferrignoadv
  - 9 vuotta sitten
  #128
  tnks
  - 9 vuotta sitten
Kilpailun järjestäjä
- 9 vuotta sitten
I like 111, please create shadows around each puzzle piece like entry number 1.
- 9 vuotta sitten
Katso 2 viestiä lisää
1. Kilpailun järjestäjä
  - 9 vuotta sitten
  HI Manual, I like your entry number 16, if you have have it look more like 111 then it might work. Less shading in the middle of the globe as you lose the effect that it is a globe. I like the colours on globe of 111 though like the way your puzzle pieces fit together, if you can match the colour to that type of globe and have the shading of each puzzle piece like entry #1 it could work.
  - 9 vuotta sitten
2. manuel0827
  - 9 vuotta sitten
  did you check #77 #76 #75 #74 #73 what can I change...
  - 9 vuotta sitten
Kilpailun järjestäjä
- 9 vuotta sitten
Hi blacktee011,

I think you are correct, the effect does not seem to be progressing, That said he has captured closest of what I am looking for (amount of , just needs to be slightly more refined.

Is it possible for you to use Entry 111 as a base and add your shading from entry 92?
- 9 vuotta sitten
1. blacktee011
  - 9 vuotta sitten
  Did you see my previous message? I came up with #114 which I consider looks even better than #92 ,if I invest enough time for it it will look awsome.Let me know which one you like better and I will go for it.
  - 9 vuotta sitten