3D Design of Adult Toy

  • Tila: Closed
  • Palkinto: $500
  • Vastaanotetut työt: 7
  • Voittaja: DesireEra

Kilpailun tehtävänanto

I already work with a 3D designer in the US but am seeking one or two more designers to work on projects for me on a regular basis. This contest is to find the best designers out there that can create very nice looking adult toys for me. I included some photos of work that my current 3D designer has done so that you can see his quality and also the types of adult toys that I sell.

Here's the contest: You create a design that I can send to my printer. Must be STL format. There should NOT be testicles included with this design, just flat at the bottom, I will add the base. Dimensions for this toy should be 10.5 inches overall length, 10 inch circumference at the base and 8 inch circumference near the head. It will look pretty thick. It can have foreskin over the head or no foreskin. It can be curved or straight. There should be no really sharp angles or deep details as these can get stuck in my molds or cause tears when I pull the toys from their molds.

Do NOT copy other adult toys, if I see that you have copied any other adult toy you will be excluded.

Beyond that, you make the design. Look at photos of penises and try to make it look as realistic as you can. I will award this project to at least one person. If that person or person's are awesome, I will have many more projects.

Suositellut taidot

Työnantajan palaute

“Great job, very easy to work with and did nice work!”

Profiilikuva mrhankeystoys, United States.

Kilpailun parhaat työt

Näytä lisää töitä

Julkinen selvennystaulu

  • paogarciav
    paogarciav
    • 2 vuotta sitten

    Hi there, thought this contest was going to stay open, I just saw you wanted to end it 5/23, but chose a winner already... Is it possible for me to submit an entry still? Are you going for just one designer or maybe choose a second winner? Please let me know, I would like a chance to participate in your contest. Kind Regards

    • 2 vuotta sitten
  • Pinochet92
    Pinochet92
    • 2 vuotta sitten

    5/23 you say?

    • 2 vuotta sitten
  • mrhankeystoys
    Kilpailun järjestäjä
    • 2 vuotta sitten

    Keep the entries coming. Right now there are only two that I am considering as a possible winner, all others have been rejected. Please keep it original and awesome, there's still room to improve here, nobody has blown me away yet.

    • 2 vuotta sitten
    1. jordanbanks
      jordanbanks
      • 2 vuotta sitten

      Let me know what you think of entry #29

      • 2 vuotta sitten
  • mrhankeystoys
    Kilpailun järjestäjä
    • 2 vuotta sitten

    I have decided to end this project on 5/23. Please have all entries in by then. I will make a final decision and award project on 5/23 by end of day (US -California time PST)

    • 2 vuotta sitten
  • BH5
    BH5
    • 2 vuotta sitten

    Hello CH, i'm on it.

    • 2 vuotta sitten
  • Skanimal
    Skanimal
    • 2 vuotta sitten

    Hi again. One more question Sir.
    original can be any concept like fantasy, geek, parody or anything. but keeping textures realistic?

    • 2 vuotta sitten
    1. mrhankeystoys
      Kilpailun järjestäjä
      • 2 vuotta sitten

      Sure, use your imagination. Just don't copy another toy maker.

      • 2 vuotta sitten
  • Skanimal
    Skanimal
    • 2 vuotta sitten

    Interesting project sir. I want to confirm about dimensions before to continue. it seems a little bit squared but huge like a toon penis with realistic texture, is that right?
    it must to be 10.5" from the base to top of the head or base to base of the corona?
    and one more thing, what is the expected or thickness of the print material?

    I have no questions by now.

    Work in process. Greetings

    • 2 vuotta sitten
    1. mrhankeystoys
      Kilpailun järjestäjä
      • 2 vuotta sitten

      Goal is for it to look very real. When you measure the print around the head or near the head, it should be about 8" circumference. Near the base of the toy or penis, it should measure about 10" circumference. Yes, it should be 10.5" long from the base of toy or penis to the tip top of penis. You can convert my numbers to diameter or metric online if you are not used to using these types of numbers.

      • 2 vuotta sitten
  • mrhankeystoys
    Kilpailun järjestäjä
    • 2 vuotta sitten

    I am running this contest for the full 30 days, I don't want any rush jobs, I want original ideas - don't use my photos of my toys that I already sell - use photos of penises from the web for your ideas and inspiration (for example - foreskin comes in all shapes and forms, not just like the toy I sell, it may cover the entire head or be pulled back or even off center and uneven) - call me a foreskin expert, I don't care.

    • 2 vuotta sitten
  • mrhankeystoys
    Kilpailun järjestäjä
    • 2 vuotta sitten

    Entry 8 is on the right path. Remove base.

    • 2 vuotta sitten
  • mrhankeystoys
    Kilpailun järjestäjä
    • 2 vuotta sitten

    Entry 7 probably has too much going on which takes away from the "realistic" look. No base is needed.

    • 2 vuotta sitten
  • mrhankeystoys
    Kilpailun järjestäjä
    • 2 vuotta sitten

    I can't see enough detail on entry 5. Eliminate base and balls. Looks very similar to El Rey toy on my site (one of the pics I included)

    • 2 vuotta sitten
  • mrhankeystoys
    Kilpailun järjestäjä
    • 2 vuotta sitten

    I like the skin texture and vein pattern on entry 4. The head needs a bit of work and could look more realistic.

    • 2 vuotta sitten
  • Pinochet92
    Pinochet92
    • 2 vuotta sitten

    Thanks for invitation, howewer sending .stl format is restricted by freelancer.com to make contest fair, i will take a part with sending an images of product when it will be done. When you will award a winner, and prize of $500 will be released to winner he will send you an stl file on next stage. Please reply if you read my message, thanks.

    • 2 vuotta sitten
    1. mrhankeystoys
      Kilpailun järjestäjä
      • 2 vuotta sitten

      I only need stl file upon award. You can convert the stl to a jpeg and post that.

      • 2 vuotta sitten
    2. Pinochet92
      Pinochet92
      • 2 vuotta sitten

      Thanks

      • 2 vuotta sitten
  • GMassaferro
    GMassaferro
    • 2 vuotta sitten

    Im interested in the large relationship with you, and i whant to know the amount of projects per month if you realy like my work. I need to know that to know if deserve my time to devote this constest.

    • 2 vuotta sitten
    1. mrhankeystoys
      Kilpailun järjestäjä
      • 2 vuotta sitten

      If the work is very good, I could start at 4 projects per month @ $500 each = $2,000 per month. I don't like a rush job though and I think it would be difficult to do more than 4 per month and still maintain good quality but that would really be up to you and how much time you have.

      • 2 vuotta sitten
  • mrhankeystoys
    Kilpailun järjestäjä
    • 2 vuotta sitten

    Let me know if there are any questions! Good luck, $500 GUARANTEED to the winner!

    • 2 vuotta sitten
  • GMassaferro
    GMassaferro
    • 2 vuotta sitten

    Hi Sr.

    • 2 vuotta sitten

Näytä lisää kommentteja

Kuinka päästä alkuun kilpailuiden kanssa

  • Ilmoita kilpailusi

    Ilmoita kilpailusi Nopeaa ja helppoa

  • Saat valtavasti töitä

    Vastaanota tonnikaupalla osallistumisia Ympäri maailmaa

  • Myönnä palkinto parhaalle työlle

    Myönnä palkinto parhaalle työlle Lataa tiedostot - Helppoa!

Ilmoita kilpailu nyt tai liity tänään!